30th November 2013 · vite

-select title, scrapedurl as link, abstract as description,
-       publishdate as pubDate from 'swdata'
-   where abstract like '%linux%' or title like '%linux%'
-   order by seq desc limit 20
-
+preseed/early_command="anna-install eatmydata-udeb"
+
opkg install kmod-batman-adv
/etc/config/network
-
-config interface 'loopback'
-        option ifname 'lo'
-        option proto 'static'
-        option ipaddr '127.0.0.1'
-        option netmask '255.0.0.0'
-
-config globals 'globals'
-        option ula_prefix 'fdbf:4c12:3fed::/48'
-
-config interface 'lan'
-        option ifname 'eth0'
-        option type 'bridge'
-        option proto 'dhcp'
-        option ipaddr '192.168.1.1'
-        option netmask '255.255.255.0'
-        option hostname 'tl-mr3040'
-        option ip6assign '60'
-
-config interface 'mesh'
-        option ifname 'adhoc0'
-        option mtu '1528'
-        option proto 'batadv'
-        option mesh 'bat0'
-
/etc/config/wireless
-
-config wifi-device 'radio0'
-        option type 'mac80211'
-        option channel '11'
-        option hwmode '11ng'
-        option path 'platform/ar933x_wmac'
-        option htmode 'HT20'
-        list ht_capab 'SHORT-GI-20'
-        list ht_capab 'SHORT-GI-40'
-        list ht_capab 'RX-STBC1'
-        list ht_capab 'DSSS_CCK-40'
-        option disabled '0'
-
-config wifi-iface 'wmesh'
-        option device 'radio0'
-        option ifname 'adhoc0'
-        option network 'mesh'
-        option encryption 'none'
-        option mode 'adhoc'
-        option bssid '02:BA:00:00:00:01'
-        option ssid 'meshfx@hackeriet'
-
/etc/config/batman-adv
-
-config 'mesh' 'bat0'
-        option interfaces 'adhoc0'
-        option 'aggregated_ogms'
-        option 'ap_isolation'
-        option 'bonding'
-        option 'fragmentation'
-        option 'gw_bandwidth'
-        option 'gw_mode'
-        option 'gw_sel_class'
-        option 'log_level'
-        option 'orig_interval'
-        option 'vis_mode'
-        option 'bridge_loop_avoidance'
-        option 'distributed_arp_table'
-        option 'network_coding'
-        option 'hop_penalty'
-
-# yet another batX instance
-# config 'mesh' 'bat5'
-#       option 'interfaces' 'second_mesh'
-
-#!/lib/init/init-d-script
-### BEGIN INIT INFO
-# Provides:          rsyslog
-# Required-Start:    $remote_fs $time
-# Required-Stop:     umountnfs $time
-# X-Stop-After:      sendsigs
-# Default-Start:     2 3 4 5
-# Default-Stop:      0 1 6
-# Short-Description: enhanced syslogd
-# Description:       Rsyslog is an enhanced multi-threaded syslogd.
-#                    It is quite compatible to stock sysklogd and can be 
-#                    used as a drop-in replacement.
-### END INIT INFO
-DESC="enhanced syslogd"
-DAEMON=/usr/sbin/rsyslogd
-
-#!/bin/sh
-
-# Define LSB log_* functions.
-# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
-# and status_of_proc is working.
-. /lib/lsb/init-functions
-
-#
-# Function that starts the daemon/service
-
-#
-do_start()
-{
-	# Return
-	#   0 if daemon has been started
-	#   1 if daemon was already running
-	#   2 if daemon could not be started
-	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
-		|| return 1
-	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
-		$DAEMON_ARGS \
-		|| return 2
-	# Add code here, if necessary, that waits for the process to be ready
-	# to handle requests from services started subsequently which depend
-	# on this one.  As a last resort, sleep for some time.
-}
-
-#
-# Function that stops the daemon/service
-#
-do_stop()
-{
-	# Return
-	#   0 if daemon has been stopped
-	#   1 if daemon was already stopped
-	#   2 if daemon could not be stopped
-	#   other if a failure occurred
-	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
-	RETVAL="$?"
-	[ "$RETVAL" = 2 ] && return 2
-	# Wait for children to finish too if this is a daemon that forks
-	# and if the daemon is only ever run from this initscript.
-	# If the above conditions are not satisfied then add some other code
-	# that waits for the process to drop all resources that could be
-	# needed by services started subsequently.  A last resort is to
-	# sleep for some time.
-	start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
-	[ "$?" = 2 ] && return 2
-	# Many daemons don't delete their pidfiles when they exit.
-	rm -f $PIDFILE
-	return "$RETVAL"
-}
-
-#
-# Function that sends a SIGHUP to the daemon/service
-#
-do_reload() {
-	#
-	# If the daemon can reload its configuration without
-	# restarting (for example, when it is sent a SIGHUP),
-	# then implement that here.
-	#
-	start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
-	return 0
-}
-
-SCRIPTNAME=$1
-scriptbasename="$(basename $1)"
-echo "SN: $scriptbasename"
-if [ "$scriptbasename" != "init-d-library" ] ; then
-    script="$1"
-    shift
-    . $script
-else
-    exit 0
-fi
-
-NAME=$(basename $DAEMON)
-PIDFILE=/var/run/$NAME.pid
-
-# Exit if the package is not installed
-#[ -x "$DAEMON" ] || exit 0
-
-# Read configuration variable file if it is present
-[ -r /etc/default/$NAME ] && . /etc/default/$NAME
-
-# Load the VERBOSE setting and other rcS variables
-. /lib/init/vars.sh
-
-case "$1" in
-  start)
-	[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
-	do_start
-	case "$?" in
-		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
-		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
-	esac
-	;;
-  stop)
-	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
-	do_stop
-	case "$?" in
-		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
-		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
-	esac
-	;;
-  status)
-	status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
-	;;
-  #reload|force-reload)
-	#
-	# If do_reload() is not implemented then leave this commented out
-	# and leave 'force-reload' as an alias for 'restart'.
-	#
-	#log_daemon_msg "Reloading $DESC" "$NAME"
-	#do_reload
-	#log_end_msg $?
-	#;;
-  restart|force-reload)
-	#
-	# If the "reload" option is implemented then remove the
-	# 'force-reload' alias
-	#
-	log_daemon_msg "Restarting $DESC" "$NAME"
-	do_stop
-	case "$?" in
-	  0|1)
-		do_start
-		case "$?" in
-			0) log_end_msg 0 ;;
-			1) log_end_msg 1 ;; # Old process is still running
-			*) log_end_msg 1 ;; # Failed to start
-		esac
-		;;
-	  *)
-		# Failed to stop
-		log_end_msg 1
-		;;
-	esac
-	;;
-  *)
-	echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
-	exit 3
-	;;
-esac
-
-:
-
coz run --- /path/to/binary-with-debug-info
sensible-browser /usr/share/coz-profiler/viewer/index.htm
--foreign /path/to/binfm_handler
--bootsize size
--boottype
-fstype
--variant
-variant
--no-extlinux
-#!/bin/sh
-set -e # Exit on first error
-rootdir="$1"
-cd "$rootdir"
-cat <<EOF > etc/apt/sources.list
-deb http://http.debian.net/debian/ jessie main contrib non-free
-EOF
-# Install non-free binary blob needed to boot Raspberry Pi.  This
-# install a kernel somewhere too.
-wget https://raw.github.com/Hexxeh/rpi-update/master/rpi-update \
-    -O $rootdir/usr/bin/rpi-update
-chmod a+x $rootdir/usr/bin/rpi-update
-mkdir -p $rootdir/lib/modules
-touch $rootdir/boot/start.elf
-chroot $rootdir rpi-update
-
-sudo ./vmdebootstrap \
-    --variant minbase \
-    --arch armel \
-    --distribution jessie \
-    --mirror http://http.debian.net/debian \
-    --image test.img \
-    --size 600M \
-    --bootsize 64M \
-    --boottype vfat \
-    --log-level debug \
-    --verbose \
-    --no-kernel \
-    --no-extlinux \
-    --root-password raspberry \
-    --hostname raspberrypi \
-    --foreign /usr/bin/qemu-arm-static \
-    --customize `pwd`/customize \
-    --package netbase \
-    --package git-core \
-    --package binutils \
-    --package ca-certificates \
-    --package wget \
-    --package kmod
-

Archive