From: Petter Reinholdtsen <pere@hungry.com>
Date: Sun, 10 Nov 2013 21:57:31 +0000 (+0000)
Subject: New post.
X-Git-Url: http://pere.pagekite.me/gitweb/homepage.git/commitdiff_plain/b3cc2bb5b75ab0928df82bebaceaaf928d1e3ef1?hp=14a233ac9477f269755af2723a835d90aafe30f0

New post.
---

diff --git a/blog/data/2013-11-10-openwrt-tl-mr3040-mesh.txt b/blog/data/2013-11-10-openwrt-tl-mr3040-mesh.txt
new file mode 100644
index 0000000000..fee1d55138
--- /dev/null
+++ b/blog/data/2013-11-10-openwrt-tl-mr3040-mesh.txt
@@ -0,0 +1,122 @@
+Title: Running TP-Link MR3040 as a batman-adv mesh node using openwrt
+Tags: english, nuug, mesh network
+Date: 2013-11-10 23:00
+
+<p>Continuing my research into mesh networking, I was recommended to
+use TP-Link 3040 and 3600 access points as mesh nodes, and the pair I
+bought arrived on Friday.  Here are my notes on how to set up the
+MR3040 as a mesh node using
+<a href="http://www.openwrt.org/">OpenWrt</a>.</p>
+
+<p>I started by following the instructions on the OpenWRT wiki for
+<a href="http://wiki.openwrt.org/toh/tp-link/tl-mr3040">TL-MR3040</a>,
+and downloaded
+<a href="http://downloads.openwrt.org/snapshots/trunk/ar71xx/openwrt-ar71xx-generic-tl-mr3040-v2-squashfs-factory.bin">the
+recommended firmware image</a>
+(openwrt-ar71xx-generic-tl-mr3040-v2-squashfs-factory.bin) and
+uploaded it into the original web interface.  The flashing went fine,
+and the machine was available via telnet on the ethernet port.  After
+logging in and setting the root password, ssh was available and I
+could start to set it up as a batman-adv mesh node.</p>
+
+<p>I started off by reading the instructions from
+<a href="http://wirelessafrica.meraka.org.za/wiki/index.php?title=Antoine's_Research">Wireless
+Africa</a>, which had quite a lot of useful information, but
+eventually I followed the recipe from the Open Mesh wiki for
+<a href="http://www.open-mesh.org/projects/batman-adv/wiki/Batman-adv-openwrt-config">using
+batman-adv on OpenWrt</a>.  A small snag was the fact that the
+<tt>opkg install kmod-batman-adv</tt> command did not work as it
+should.  The batman-adv kernel module would fail to load because its
+dependency crc16 was not already loaded.  I
+<a href="https://dev.openwrt.org/ticket/14452">reported the bug</a> to
+the openwrt project and hope it will be fixed soon.  But the problem
+only seem to affect initial testing of batman-adv, as configuration
+seem to work when booting from scratch.</p>
+
+<p>The setup is done using files in /etc/config/.  I did not bridge
+the Ethernet and mesh interfaces this time, to be able to hook up the
+box on my local network and log into it for configuration updates.
+The following files were changed and look like this after modifying
+them:</p>
+
+<p><tt>/etc/config/network</tt></p>
+
+<pre>
+
+config interface 'loopback'
+        option ifname 'lo'
+        option proto 'static'
+        option ipaddr '127.0.0.1'
+        option netmask '255.0.0.0'
+
+config globals 'globals'
+        option ula_prefix 'fdbf:4c12:3fed::/48'
+
+config interface 'lan'
+        option ifname 'eth0'
+        option type 'bridge'
+        option proto 'dhcp'
+        option ipaddr '192.168.1.1'
+        option netmask '255.255.255.0'
+        option hostname 'tl-mr3040'
+        option ip6assign '60'
+
+config interface 'mesh'
+        option ifname 'adhoc0'
+        option mtu '1528'
+        option proto 'batadv'
+        option mesh 'bat0'
+</pre>
+
+<p><tt>/etc/config/wireless</tt></p>
+<pre>
+
+config wifi-device 'radio0'
+        option type 'mac80211'
+        option channel '11'
+        option hwmode '11ng'
+        option path 'platform/ar933x_wmac'
+        option htmode 'HT20'
+        list ht_capab 'SHORT-GI-20'
+        list ht_capab 'SHORT-GI-40'
+        list ht_capab 'RX-STBC1'
+        list ht_capab 'DSSS_CCK-40'
+        option disabled '0'
+
+config wifi-iface 'wmesh'
+        option device 'radio0'
+        option ifname 'adhoc0'
+        option network 'mesh'
+        option encryption 'none'
+        option mode 'adhoc'
+        option bssid '02:BA:00:00:00:01'
+        option ssid 'meshfx@hackeriet'
+</pre>
+<p><tt>/etc/config/batman-adv</tt></p>
+<pre>
+
+config 'mesh' 'bat0'
+        option interfaces 'adhoc0'
+        option 'aggregated_ogms'
+        option 'ap_isolation'
+        option 'bonding'
+        option 'fragmentation'
+        option 'gw_bandwidth'
+        option 'gw_mode'
+        option 'gw_sel_class'
+        option 'log_level'
+        option 'orig_interval'
+        option 'vis_mode'
+        option 'bridge_loop_avoidance'
+        option 'distributed_arp_table'
+        option 'network_coding'
+        option 'hop_penalty'
+
+# yet another batX instance
+# config 'mesh' 'bat5'
+#       option 'interfaces' 'second_mesh'
+</pre>
+
+<p>The mesh node is now operational.  I have yet to test its range,
+but I hope it is good.  I have not yet tested the TP-Link 3600 box
+still wrapped up in plastic.</p>