X-Git-Url: http://pere.pagekite.me/gitweb/homepage.git/blobdiff_plain/b0e0987d30dc410df79d1033c314e2dbbf4fb26f..eb973c52f2e5a325c7ca6df9b9ff95d4f0dc3100:/blog/index.html diff --git a/blog/index.html b/blog/index.html index 863f4aeab5..caec1056c6 100644 --- a/blog/index.html +++ b/blog/index.html @@ -20,40 +20,19 @@
-
How does it feel to be wiretapped, when you should be doing the wiretapping...
-
8th March 2017
-

So the new president in the United States of America claim to be -surprised to discover that he was wiretapped during the election -before he was elected president. He even claim this must be illegal. -Well, doh, if it is one thing the confirmations from Snowden -documented, it is that the entire population in USA is wiretapped, one -way or another. Of course the president candidates were wiretapped, -alongside the senators, judges and the rest of the people in USA.

- -

Next, the Federal Bureau of Investigation ask the Department of -Justice to go public rejecting the claims that Donald Trump was -wiretapped illegally. I fail to see the relevance, given that I am -sure the surveillance industry in USA according to themselves believe -they have all the legal backing they need to conduct mass surveillance -on the entire world.

- -

There is even the director of the FBI stating that he never saw an -order requesting wiretapping of Donald Trump. That is not very -surprising, given how the FISA court work, with all its activity being -secret. Perhaps he only heard about it?

- -

What I find most sad in this story is how Norwegian journalists -present it. In a news reports the other day in the radio from the -Norwegian National broadcasting Company (NRK), I heard the journalist -claim that 'the FBI denies any wiretapping', while the reality is that -'the FBI denies any illegal wiretapping'. There is a fundamental and -important difference, and it make me sad that the journalists are -unable to grasp it.

+
Software created using taxpayers’ money should be Free Software
+
30th August 2018
+

It might seem obvious that software created using tax money should +be available for everyone to use and improve. Free Software +Foundation Europe recentlystarted a campaign to help get more people +to understand this, and I just signed the petition on +Public Money, Public Code to help +them. I hope you too will do the same.

- Tags: english, surveillance. + Tags: english, opphavsrett.
@@ -61,33 +40,71 @@ unable to grasp it.

-
Norwegian Bokmål translation of The Debian Administrator's Handbook complete, proofreading in progress
-
3rd March 2017
-

For almost a year now, we have been working on making a Norwegian -Bokmål edition of The Debian -Administrator's Handbook. Now, thanks to the tireless effort of -Ole-Erik, Ingrid and Andreas, the initial translation is complete, and -we are working on the proof reading to ensure consistent language and -use of correct computer science terms. The plan is to make the book -available on paper, as well as in electronic form. For that to -happen, the proof reading must be completed and all the figures need -to be translated. If you want to help out, get in touch.

- -

A - -fresh PDF edition in A4 format (the final book will have smaller -pages) of the book created every morning is available for -proofreading. If you find any errors, please -visit -Weblate and correct the error. The -state -of the translation including figures is a useful source for those -provide Norwegian bokmål screen shots and figures.

+
A bit more on privacy respecting health monitor / fitness tracker
+
13th August 2018
+

A few days ago, I wondered if there are any privacy respecting +health monitors and/or fitness trackers available for sale these days. +I would like to buy one, but do not want to share my personal data +with strangers, nor be forced to have a mobile phone to get data out +of the unit. I've received some ideas, and would like to share them +with you. + +One interesting data point was a pointer to a Free Software app for +Android named +Gadgetbridge. +It provide cloudless collection and storing of data from a variety of +trackers. Its +list +of supported devices is a good indicator for units where the +protocol is fairly open, as it is obviously being handled by Free +Software. Other units are reportedly encrypting the collected +information with their own public key, making sure only the vendor +cloud service is able to extract data from the unit. The people +contacting me about Gadgetbirde said they were using +Amazfit +Bip and +Xiaomi +Band 3.

+ +

I also got a suggestion to look at some of the units from Garmin. +I was told their GPS watches can be connected via USB and show up as a +USB storage device with +Garmin +FIT files containing the collected measurements. While +proprietary, FIT files apparently can be read at least by +GPSBabel and the +GpxPod Nextcloud +app. It is unclear to me if they can read step count and heart rate +data. The person I talked to was using a +Garmin Forerunner +935, which is a fairly expensive unit. I doubt it is worth it for +a unit where the vendor clearly is trying its best to move from open +to closed systems. I still remember when Garmin dropped NMEA support +in its GPSes.

+ +

A final idea was to build ones own unit, perhaps by basing it on a +wearable hardware platforms like +the Flora Geo +Watch. Sound like fun, but I had more money than time to spend on +the topic, so I suspect it will have to wait for another time.

+ +

While I was working on tracking down links, I came across an +inspiring TED talk by Dave Debronkart about +being a +e-patient, and discovered the web site +Participatory +Medicine. If you too want to track your own health and fitness +without having information about your private life floating around on +computers owned by others, I recommend checking it out.

+ +

As usual, if you use Bitcoin and want to show your support of my +activities, please send Bitcoin donations to my address +15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b.

- Tags: debian, debian-handbook, english. + Tags: english.
@@ -95,77 +112,36 @@ provide Norwegian bokmål screen shots and figures.

-
Unlimited randomness with the ChaosKey?
-
1st March 2017
-

A few days ago I ordered a small batch of -the ChaosKey, a small -USB dongle for generating entropy created by Bdale Garbee and Keith -Packard. Yesterday it arrived, and I am very happy to report that it -work great! According to its designers, to get it to work out of the -box, you need the Linux kernel version 4.1 or later. I tested on a -Debian Stretch machine (kernel version 4.9), and there it worked just -fine, increasing the available entropy very quickly. I wrote a small -test oneliner to test. It first print the current entropy level, -drain /dev/random, and then print the entropy level for five seconds. -Here is the situation without the ChaosKey inserted:

- -
-% cat /proc/sys/kernel/random/entropy_avail; \
-  dd bs=1M if=/dev/random of=/dev/null count=1; \
-  for n in $(seq 1 5); do \
-     cat /proc/sys/kernel/random/entropy_avail; \
-     sleep 1; \
-  done
-300
-0+1 oppføringer inn
-0+1 oppføringer ut
-28 byte kopiert, 0,000264565 s, 106 kB/s
-4
-8
-12
-17
-21
-%
-
+
Privacy respecting health monitor / fitness tracker?
+
7th August 2018
+

Dear lazyweb,

+ +

I wonder, is there a fitness tracker / health monitor available for +sale today that respect the users privacy? With this I mean a +watch/bracelet capable of measuring pulse rate and other +fitness/health related values (and by all means, also the correct time +and location if possible), which is only provided for +me to extract/read from the unit with computer without a radio beacon +and Internet connection. In other words, it do not depend on a cell +phone app, and do make the measurements available via other peoples +computer (aka "the cloud"). The collected data should be available +using only free software. I'm not interested in depending on some +non-free software that will leave me high and dry some time in the +future. I've been unable to find any such unit. I would like to buy +it. The ones I have seen for sale here in Norway are proud to report +that they share my health data with strangers (aka "cloud enabled"). +Is there an alternative? I'm not interested in giving money to people +requiring me to accept "privacy terms" to allow myself to measure my +own health.

-

The entropy level increases by 3-4 every second. In such case any -application requiring random bits (like a HTTPS enabled web server) -will halt and wait for more entrpy. And here is the situation with -the ChaosKey inserted:

- -
-% cat /proc/sys/kernel/random/entropy_avail; \
-  dd bs=1M if=/dev/random of=/dev/null count=1; \
-  for n in $(seq 1 5); do \
-     cat /proc/sys/kernel/random/entropy_avail; \
-     sleep 1; \
-  done
-1079
-0+1 oppføringer inn
-0+1 oppføringer ut
-104 byte kopiert, 0,000487647 s, 213 kB/s
-433
-1028
-1031
-1035
-1038
-%
-
- -

Quite the difference. :) I bought a few more than I need, in case -someone want to buy one here in Norway. :)

- -

Update: The dongle was presented at Debconf last year. You might -find the talk -recording illuminating. It explains exactly what the source of -randomness is, if you are unable to spot it from the schema drawing -available from the ChaosKey web site linked at the start of this blog -post.

+

As usual, if you use Bitcoin and want to show your support of my +activities, please send Bitcoin donations to my address +15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b.

- Tags: debian, english. + Tags: english.
@@ -173,34 +149,75 @@ post.

-
Detect OOXML files with undefined behaviour?
-
21st February 2017
-

I just noticed -the -new Norwegian proposal for archiving rules in the goverment list -ECMA-376 -/ ISO/IEC 29500 (aka OOXML) as valid formats to put in long term -storage. Luckily such files will only be accepted based on -pre-approval from the National Archive. Allowing OOXML files to be -used for long term storage might seem like a good idea as long as we -forget that there are plenty of ways for a "valid" OOXML document to -have content with no defined interpretation in the standard, which -lead to a question and an idea.

- -

Is there any tool to detect if a OOXML document depend on such -undefined behaviour? It would be useful for the National Archive (and -anyone else interested in verifying that a document is well defined) -to have such tool available when considering to approve the use of -OOXML. I'm aware of the -officeotron OOXML -validator, but do not know how complete it is nor if it will -report use of undefined behaviour. Are there other similar tools -available? Please send me an email if you know of any such tool.

+
Sharing images with friends and family using RSS and EXIF/XMP metadata
+
31st July 2018
+

For a while now, I have looked for a sensible way to share images +with my family using a self hosted solution, as it is unacceptable to +place images from my personal life under the control of strangers +working for data hoarders like Google or Dropbox. The last few days I +have drafted an approach that might work out, and I would like to +share it with you. I would like to publish images on a server under +my control, and point some Internet connected display units using some +free and open standard to the images I published. As my primary +language is not limited to ASCII, I need to store metadata using +UTF-8. Many years ago, I hoped to find a digital photo frame capable +of reading a RSS feed with image references (aka using the +<enclosure> RSS tag), but was unable to find a current supplier +of such frames. In the end I gave up that approach.

+ +

Some months ago, I discovered that +XScreensaver is able to +read images from a RSS feed, and used it to set up a screen saver on +my home info screen, showing images from the Daily images feed from +NASA. This proved to work well. More recently I discovered that +Kodi (both using +OpenELEC and +LibreELEC) provide the +Feedreader +screen saver capable of reading a RSS feed with images and news. For +fun, I used it this summer to test Kodi on my parents TV by hooking up +a Raspberry PI unit with LibreELEC, and wanted to provide them with a +screen saver showing selected pictures from my selection.

+ +

Armed with motivation and a test photo frame, I set out to generate +a RSS feed for the Kodi instance. I adjusted my Freedombox instance, created +/var/www/html/privatepictures/, wrote a small Perl script to extract +title and description metadata from the photo files and generate the +RSS file. I ended up using Perl instead of python, as the +libimage-exiftool-perl Debian package seemed to handle the EXIF/XMP +tags I ended up using, while python3-exif did not. The relevant EXIF +tags only support ASCII, so I had to find better alternatives. XMP +seem to have the support I need.

+ +

I am a bit unsure which EXIF/XMP tags to use, as I would like to +use tags that can be easily added/updated using normal free software +photo managing software. I ended up using the tags set using this +exiftool command, as these tags can also be set using digiKam:

+ +
+exiftool -headline='The RSS image title' \
+  -description='The RSS image description.' \
+  -subject+=for-family photo.jpeg
+
+ +

I initially tried the "-title" and "keyword" tags, but they were +invisible in digiKam, so I changed to "-headline" and "-subject". I +use the keyword/subject 'for-family' to flag that the photo should be +shared with my family. Images with this keyword set are located and +copied into my Freedombox for the RSS generating script to find.

+ +

Are there better ways to do this? Get in touch if you have better +suggestions.

+ +

As usual, if you use Bitcoin and want to show your support of my +activities, please send Bitcoin donations to my address +15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b.

- Tags: english, nuug, standard. + Tags: debian, english.
@@ -208,33 +225,105 @@ available? Please send me an email if you know of any such tool.

-
Ruling ignored our objections to the seizure of popcorn-time.no (#domstolkontroll)
-
13th February 2017
-

A few days ago, we received the ruling from -my -day in court. The case in question is a challenge of the seizure -of the DNS domain popcorn-time.no. The ruling simply did not mention -most of our arguments, and seemed to take everything ØKOKRIM said at -face value, ignoring our demonstration and explanations. But it is -hard to tell for sure, as we still have not seen most of the documents -in the case and thus were unprepared and unable to contradict several -of the claims made in court by the opposition. We are considering an -appeal, but it is partly a question of funding, as it is costing us -quite a bit to pay for our lawyer. If you want to help, please -donate to the -NUUG defense fund.

- -

The details of the case, as far as we know it, is available in -Norwegian from -the NUUG -blog. This also include -the -ruling itself.

+
Simple streaming the Linux desktop to Kodi using GStreamer and RTP
+
12th July 2018
+

Last night, I wrote +a +recipe to stream a Linux desktop using VLC to a instance of Kodi. +During the day I received valuable feedback, and thanks to the +suggestions I have been able to rewrite the recipe into a much simpler +approach requiring no setup at all. It is a single script that take +care of it all.

+ +

This new script uses GStreamer instead of VLC to capture the +desktop and stream it to Kodi. This fixed the video quality issue I +saw initially. It further removes the need to add a m3u file on the +Kodi machine, as it instead connects to +the JSON-RPC API in +Kodi and simply ask Kodi to play from the stream created using +GStreamer. Streaming the desktop to Kodi now become trivial. Copy +the script below, run it with the DNS name or IP address of the kodi +server to stream to as the only argument, and watch your screen show +up on the Kodi screen. Note, it depend on multicast on the local +network, so if you need to stream outside the local network, the +script must be modified. Also note, I have no idea if audio work, as +I only care about the picture part.

+ +
+#!/bin/sh
+#
+# Stream the Linux desktop view to Kodi.  See
+# http://people.skolelinux.org/pere/blog/Streaming_the_Linux_desktop_to_Kodi_using_VLC_and_RTSP.html
+# for backgorund information.
+
+# Make sure the stream is stopped in Kodi and the gstreamer process is
+# killed if something go wrong (for example if curl is unable to find the
+# kodi server).  Do the same when interrupting this script.
+kodicmd() {
+    host="$1"
+    cmd="$2"
+    params="$3"
+    curl --silent --header 'Content-Type: application/json' \
+	 --data-binary "{ \"id\": 1, \"jsonrpc\": \"2.0\", \"method\": \"$cmd\", \"params\": $params }" \
+	 "http://$host/jsonrpc"
+}
+cleanup() {
+    if [ -n "$kodihost" ] ; then
+	# Stop the playing when we end
+	playerid=$(kodicmd "$kodihost" Player.GetActivePlayers "{}" |
+			    jq .result[].playerid)
+	kodicmd "$kodihost" Player.Stop "{ \"playerid\" : $playerid }" > /dev/null
+    fi
+    if [ "$gstpid" ] && kill -0 "$gstpid" >/dev/null 2>&1; then
+	kill "$gstpid"
+    fi
+}
+trap cleanup EXIT INT
+
+if [ -n "$1" ]; then
+    kodihost=$1
+    shift
+else
+    kodihost=kodi.local
+fi
+
+mcast=239.255.0.1
+mcastport=1234
+mcastttl=1
+
+pasrc=$(pactl list | grep -A2 'Source #' | grep 'Name: .*\.monitor$' | \
+  cut -d" " -f2|head -1)
+gst-launch-1.0 ximagesrc use-damage=0 ! video/x-raw,framerate=30/1 ! \
+  videoconvert ! queue2 ! \
+  x264enc bitrate=8000 speed-preset=superfast tune=zerolatency qp-min=30 \
+  key-int-max=15 bframes=2 ! video/x-h264,profile=high ! queue2 ! \
+  mpegtsmux alignment=7 name=mux ! rndbuffersize max=1316 min=1316 ! \
+  udpsink host=$mcast port=$mcastport ttl-mc=$mcastttl auto-multicast=1 sync=0 \
+  pulsesrc device=$pasrc ! audioconvert ! queue2 ! avenc_aac ! queue2 ! mux. \
+  > /dev/null 2>&1 &
+gstpid=$!
+
+# Give stream a second to get going
+sleep 1
+
+# Ask kodi to start streaming using its JSON-RPC API
+kodicmd "$kodihost" Player.Open \
+	"{\"item\": { \"file\": \"udp://@$mcast:$mcastport\" } }" > /dev/null
+
+# wait for gst to end
+wait "$gstpid"
+
+ +

I hope you find the approach useful. I know I do.

+ +

As usual, if you use Bitcoin and want to show your support of my +activities, please send Bitcoin donations to my address +15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b.

- Tags: english, nuug, offentlig innsyn, opphavsrett. + Tags: debian, english, video.
@@ -242,86 +331,152 @@ ruling itself.

-
A day in court challenging seizure of popcorn-time.no for #domstolkontroll
-
3rd February 2017
-

- -

On Wednesday, I spent the entire day in court in Follo Tingrett -representing the member association -NUUG, alongside the member -association EFN and the DNS registrar -IMC, challenging the seizure of the DNS name popcorn-time.no. It -was interesting to sit in a court of law for the first time in my -life. Our team can be seen in the picture above: attorney Ola -Tellesbø, EFN board member Tom Fredrik Blenning, IMC CEO Morten Emil -Eriksen and NUUG board member Petter Reinholdtsen.

- -

The -case at hand is that the Norwegian National Authority for -Investigation and Prosecution of Economic and Environmental Crime (aka -Økokrim) decided on their own, to seize a DNS domain early last -year, without following -the -official policy of the Norwegian DNS authority which require a -court decision. The web site in question was a site covering Popcorn -Time. And Popcorn Time is the name of a technology with both legal -and illegal applications. Popcorn Time is a client combining -searching a Bittorrent directory available on the Internet with -downloading/distribute content via Bittorrent and playing the -downloaded content on screen. It can be used illegally if it is used -to distribute content against the will of the right holder, but it can -also be used legally to play a lot of content, for example the -millions of movies -available from the -Internet Archive or the collection -available from Vodo. We created -a -video demonstrating legally use of Popcorn Time and played it in -Court. It can of course be downloaded using Bittorrent.

- -

I did not quite know what to expect from a day in court. The -government held on to their version of the story and we held on to -ours, and I hope the judge is able to make sense of it all. We will -know in two weeks time. Unfortunately I do not have high hopes, as -the Government have the upper hand here with more knowledge about the -case, better training in handling criminal law and in general higher -standing in the courts than fairly unknown DNS registrar and member -associations. It is expensive to be right also in Norway. So far the -case have cost more than NOK 70 000,-. To help fund the case, NUUG -and EFN have asked for donations, and managed to collect around NOK 25 -000,- so far. Given the presentation from the Government, I expect -the government to appeal if the case go our way. And if the case do -not go our way, I hope we have enough funding to appeal.

- -

From the other side came two people from Økokrim. On the benches, -appearing to be part of the group from the government were two people -from the Simonsen Vogt Wiik lawyer office, and three others I am not -quite sure who was. Økokrim had proposed to present two witnesses -from The Motion Picture Association, but this was rejected because -they did not speak Norwegian and it was a bit late to bring in a -translator, but perhaps the two from MPA were present anyway. All -seven appeared to know each other. Good to see the case is take -seriously.

- -

If you, like me, believe the courts should be involved before a DNS -domain is hijacked by the government, or you believe the Popcorn Time -technology have a lot of useful and legal applications, I suggest you -too donate to -the NUUG defense fund. Both Bitcoin and bank transfer are -available. If NUUG get more than we need for the legal action (very -unlikely), the rest will be spend promoting free software, open -standards and unix-like operating systems in Norway, so no matter what -happens the money will be put to good use.

- -

If you want to lean more about the case, I recommend you check out -the blog -posts from NUUG covering the case. They cover the legal arguments -on both sides.

+
Streaming the Linux desktop to Kodi using VLC and RTSP
+
12th July 2018
+

PS: See +the +followup post for a even better approach.

+ +

A while back, I was asked by a friend how to stream the desktop to +my projector connected to Kodi. I sadly had to admit that I had no +idea, as it was a task I never had tried. Since then, I have been +looking for a way to do so, preferable without much extra software to +install on either side. Today I found a way that seem to kind of +work. Not great, but it is a start.

+ +

I had a look at several approaches, for example +using uPnP +DLNA as described in 2011, but it required a uPnP server, fuse and +local storage enough to store the stream locally. This is not going +to work well for me, lacking enough free space, and it would +impossible for my friend to get working.

+ +

Next, it occurred to me that perhaps I could use VLC to create a +video stream that Kodi could play. Preferably using +broadcast/multicast, to avoid having to change any setup on the Kodi +side when starting such stream. Unfortunately, the only recipe I +could find using multicast used the rtp protocol, and this protocol +seem to not be supported by Kodi.

+ +

On the other hand, the rtsp protocol is working! Unfortunately I +have to specify the IP address of the streaming machine in both the +sending command and the file on the Kodi server. But it is showing my +desktop, and thus allow us to have a shared look on the big screen at +the programs I work on.

+ +

I did not spend much time investigating codeces. I combined the +rtp and rtsp recipes from +the +VLC Streaming HowTo/Command Line Examples, and was able to get +this working on the desktop/streaming end.

+ +
+vlc screen:// --sout \
+  '#transcode{vcodec=mp4v,acodec=mpga,vb=800,ab=128}:rtp{dst=projector.local,port=1234,sdp=rtsp://192.168.11.4:8080/test.sdp}'
+
+ +

I ssh-ed into my Kodi box and created a file like this with the +same IP address:

+ +
+echo rtsp://192.168.11.4:8080/test.sdp \
+  > /storage/videos/screenstream.m3u
+
+ +

Note the 192.168.11.4 IP address is my desktops IP address. As far +as I can tell the IP must be hardcoded for this to work. In other +words, if someone elses machine is going to do the steaming, you have +to update screenstream.m3u on the Kodi machine and adjust the vlc +recipe. To get started, locate the file in Kodi and select the m3u +file while the VLC stream is running. The desktop then show up in my +big screen. :)

+ +

When using the same technique to stream a video file with audio, +the audio quality is really bad. No idea if the problem is package +loss or bad parameters for the transcode. I do not know VLC nor Kodi +enough to tell.

+ +

Update 2018-07-12: Johannes Schauer send me a few +succestions and reminded me about an important step. The "screen:" +input source is only available once the vlc-plugin-access-extra +package is installed on Debian. Without it, you will see this error +message: "VLC is unable to open the MRL 'screen://'. Check the log +for details." He further found that it is possible to drop some parts +of the VLC command line to reduce the amount of hardcoded information. +It is also useful to consider using cvlc to avoid having the VLC +window in the desktop view. In sum, this give us this command line on +the source end + +

+cvlc screen:// --sout \
+  '#transcode{vcodec=mp4v,acodec=mpga,vb=800,ab=128}:rtp{sdp=rtsp://:8080/}'
+
+ +

and this on the Kodi end

+ +

+echo rtsp://192.168.11.4:8080/ \
+  > /storage/videos/screenstream.m3u
+
+ +

Still bad image quality, though. But I did discover that streaming +a DVD using dvdsimple:///dev/dvd as the source had excellent video and +audio quality, so I guess the issue is in the input or transcoding +parts, not the rtsp part. I've tried to change the vb and ab +parameters to use more bandwidth, but it did not make a +difference.

+ +

I further received a suggestion from Einar Haraldseid to try using +gstreamer instead of VLC, and this proved to work great! He also +provided me with the trick to get Kodi to use a multicast stream as +its source. By using this monstrous oneliner, I can stream my desktop +with good video quality in reasonable framerate to the 239.255.0.1 +multicast address on port 1234: + +

+gst-launch-1.0 ximagesrc use-damage=0 ! video/x-raw,framerate=30/1 ! \
+  videoconvert ! queue2 ! \
+  x264enc bitrate=8000 speed-preset=superfast tune=zerolatency qp-min=30 \
+  key-int-max=15 bframes=2 ! video/x-h264,profile=high ! queue2 ! \
+  mpegtsmux alignment=7 name=mux ! rndbuffersize max=1316 min=1316 ! \
+  udpsink host=239.255.0.1 port=1234 ttl-mc=1 auto-multicast=1 sync=0 \
+  pulsesrc device=$(pactl list | grep -A2 'Source #' | \
+    grep 'Name: .*\.monitor$' |  cut -d" " -f2|head -1) ! \
+  audioconvert ! queue2 ! avenc_aac ! queue2 ! mux.
+
+ +

and this on the Kodi end

+ +

+echo udp://@239.255.0.1:1234 \
+  > /storage/videos/screenstream.m3u
+
+ +

Note the trick to pick a valid pulseaudio source. It might not +pick the one you need. This approach will of course lead to trouble +if more than one source uses the same multicast port and address. +Note the ttl-mc=1 setting, which limit the multicast packages to the +local network. If the value is increased, your screen will be +broadcasted further, one network "hop" for each increase (read up on +multicast to learn more. :)!

+ +

Having cracked how to get Kodi to receive multicast streams, I +could use this VLC command to stream to the same multicast address. +The image quality is way better than the rtsp approach, but gstreamer +seem to be doing a better job.

+ +
+cvlc screen:// --sout '#transcode{vcodec=mp4v,acodec=mpga,vb=800,ab=128}:rtp{mux=ts,dst=239.255.0.1,port=1234,sdp=sap}'
+
+ +

As usual, if you use Bitcoin and want to show your support of my +activities, please send Bitcoin donations to my address +15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b.

- Tags: english, nuug, offentlig innsyn, opphavsrett. + Tags: debian, english, video.
@@ -329,41 +484,121 @@ on both sides.

-
Nasjonalbiblioteket avslutter sin ulovlige bruk av Google Skjemaer
-
12th January 2017
-

I dag fikk jeg en skikkelig gladmelding. Bakgrunnen er at før jul -arrangerte Nasjonalbiblioteket -et -seminar om sitt knakende gode tiltak «verksregister». Eneste -måten å melde seg på dette seminaret var å sende personopplysninger -til Google via Google Skjemaer. Dette syntes jeg var tvilsom praksis, -da det bør være mulig å delta på seminarer arrangert av det offentlige -uten å måtte dele sine interesser, posisjon og andre -personopplysninger med Google. Jeg ba derfor om innsyn via -Mimes brønn i -avtaler -og vurderinger Nasjonalbiblioteket hadde rundt dette. -Personopplysningsloven legger klare rammer for hva som må være på -plass før en kan be tredjeparter, spesielt i utlandet, behandle -personopplysninger på sine vegne, så det burde eksistere grundig -dokumentasjon før noe slikt kan bli lovlig. To jurister hos -Nasjonalbiblioteket mente først dette var helt i orden, og at Googles -standardavtale kunne brukes som databehandlingsavtale. Det syntes jeg -var merkelig, men har ikke hatt kapasitet til å følge opp saken før -for to dager siden.

- -

Gladnyheten i dag, som kom etter at jeg tipset Nasjonalbiblioteket -om at Datatilsynet underkjente Googles standardavtaler som -databehandleravtaler i 2011, er at Nasjonalbiblioteket har bestemt seg -for å avslutte bruken av Googles Skjemaer/Apps og gå i dialog med DIFI -for å finne bedre måter å håndtere påmeldinger i tråd med -personopplysningsloven. Det er fantastisk å se at av og til hjelper -det å spørre hva i alle dager det offentlige holder på med.

+
What is the most supported MIME type in Debian in 2018?
+
9th July 2018
+

Five years ago, +I +measured what the most supported MIME type in Debian was, by +analysing the desktop files in all packages in the archive. Since +then, the DEP-11 AppStream system has been put into production, making +the task a lot easier. This made me want to repeat the measurement, +to see how much things changed. Here are the new numbers, for +unstable only this time: + +

Debian Unstable:

+ +
+  count MIME type
+  ----- -----------------------
+     56 image/jpeg
+     55 image/png
+     49 image/tiff
+     48 image/gif
+     39 image/bmp
+     38 text/plain
+     37 audio/mpeg
+     34 application/ogg
+     33 audio/x-flac
+     32 audio/x-mp3
+     30 audio/x-wav
+     30 audio/x-vorbis+ogg
+     29 image/x-portable-pixmap
+     27 inode/directory
+     27 image/x-portable-bitmap
+     27 audio/x-mpeg
+     26 application/x-ogg
+     25 audio/x-mpegurl
+     25 audio/ogg
+     24 text/html
+
+ +

The list was created like this using a sid chroot: "cat +/var/lib/apt/lists/*sid*_dep11_Components-amd64.yml.gz| zcat | awk '/^ +- \S+\/\S+$/ {print $2 }' | sort | uniq -c | sort -nr | head -20"

+ +

It is interesting to see how image formats have passed text/plain +as the most announced supported MIME type. These days, thanks to the +AppStream system, if you run into a file format you do not know, and +want to figure out which packages support the format, you can find the +MIME type of the file using "file --mime <filename>", and then +look up all packages announcing support for this format in their +AppStream metadata (XML or .desktop file) using "appstreamcli +what-provides mimetype <mime-type>. For example if you, like +me, want to know which packages support inode/directory, you can get a +list like this:

+ +

+% appstreamcli what-provides mimetype inode/directory | grep Package: | sort
+Package: anjuta
+Package: audacious
+Package: baobab
+Package: cervisia
+Package: chirp
+Package: dolphin
+Package: doublecmd-common
+Package: easytag
+Package: enlightenment
+Package: ephoto
+Package: filelight
+Package: gwenview
+Package: k4dirstat
+Package: kaffeine
+Package: kdesvn
+Package: kid3
+Package: kid3-qt
+Package: nautilus
+Package: nemo
+Package: pcmanfm
+Package: pcmanfm-qt
+Package: qweborf
+Package: ranger
+Package: sirikali
+Package: spacefm
+Package: spacefm
+Package: vifm
+%
+

+ +

Using the same method, I can quickly discover that the Sketchup file +format is not yet supported by any package in Debian:

+ +

+% appstreamcli what-provides mimetype  application/vnd.sketchup.skp
+Could not find component providing 'mimetype::application/vnd.sketchup.skp'.
+%
+

+ +

Yesterday I used it to figure out which packages support the STL 3D +format:

+ +

+% appstreamcli what-provides mimetype  application/sla|grep Package
+Package: cura
+Package: meshlab
+Package: printrun
+%
+

+ +

PS: A new version of Cura was uploaded to Debian yesterday.

+ +

As usual, if you use Bitcoin and want to show your support of my +activities, please send Bitcoin donations to my address +15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b.

- Tags: norsk, personvern, surveillance, web. + Tags: debian, english, isenkram.
@@ -371,86 +606,83 @@ det å spørre hva i alle dager det offentlige holder på med.

-
Bryter NAV sin egen personvernerklæring?
-
11th January 2017
-

Jeg leste med interesse en nyhetssak hos -digi.no -og -NRK -om at det ikke bare er meg, men at også NAV bedriver geolokalisering -av IP-adresser, og at det gjøres analyse av IP-adressene til de som -sendes inn meldekort for å se om meldekortet sendes inn fra -utenlandske IP-adresser. Politiadvokat i Drammen, Hans Lyder Haare, -er sitert i NRK på at «De to er jo blant annet avslørt av -IP-adresser. At man ser at meldekortet kommer fra utlandet.»

- -

Jeg synes det er fint at det blir bedre kjent at IP-adresser -knyttes til enkeltpersoner og at innsamlet informasjon brukes til å -stedsbestemme personer også av aktører her i Norge. Jeg ser det som -nok et argument for å bruke -Tor så mye som mulig for å -gjøre gjøre IP-lokalisering vanskeligere, slik at en kan beskytte sin -privatsfære og unngå å dele sin fysiske plassering med -uvedkommede.

- -

Men det er en ting som bekymrer meg rundt denne nyheten. Jeg ble -tipset (takk #nuug) om -NAVs -personvernerklæring, som under punktet «Personvern og statistikk» -lyder:

- -

- -

«Når du besøker nav.no, etterlater du deg elektroniske spor. Sporene -dannes fordi din nettleser automatisk sender en rekke opplysninger til -NAVs tjener (server-maskin) hver gang du ber om å få vist en side. Det -er eksempelvis opplysninger om hvilken nettleser og -versjon du -bruker, og din internettadresse (ip-adresse). For hver side som vises, -lagres følgende opplysninger:

- -
    -
  • hvilken side du ser pÃ¥
    • -
  • dato og tid
    • -
  • hvilken nettleser du bruker
    • -
  • din ip-adresse
    • -
+
Debian APT upgrade without enough free space on the disk...
+
8th July 2018
+

Quite regularly, I let my Debian Sid/Unstable chroot stay untouch +for a while, and when I need to update it there is not enough free +space on the disk for apt to do a normal 'apt upgrade'. I normally +would resolve the issue by doing 'apt install <somepackages>' to +upgrade only some of the packages in one batch, until the amount of +packages to download fall below the amount of free space available. +Today, I had about 500 packages to upgrade, and after a while I got +tired of trying to install chunks of packages manually. I concluded +that I did not have the spare hours required to complete the task, and +decided to see if I could automate it. I came up with this small +script which I call 'apt-in-chunks':

+ +

+#!/bin/sh
+#
+# Upgrade packages when the disk is too full to upgrade every
+# upgradable package in one lump.  Fetching packages to upgrade using
+# apt, and then installing using dpkg, to avoid changing the package
+# flag for manual/automatic.
+
+set -e
+
+ignore() {
+    if [ "$1" ]; then
+	grep -v "$1"
+    else
+	cat
+    fi
+}
+
+for p in $(apt list --upgradable | ignore "$@" |cut -d/ -f1 | grep -v '^Listing...'); do
+    echo "Upgrading $p"
+    apt clean
+    apt install --download-only -y $p
+    for f in /var/cache/apt/archives/*.deb; do
+	if [ -e "$f" ]; then
+	    dpkg -i /var/cache/apt/archives/*.deb
+	    break
+	fi
+    done
+done
+

+ +

The script will extract the list of packages to upgrade, try to +download the packages needed to upgrade one package, install the +downloaded packages using dpkg. The idea is to upgrade packages +without changing the APT mark for the package (ie the one recording of +the package was manually requested or pulled in as a dependency). To +use it, simply run it as root from the command line. If it fail, try +'apt install -f' to clean up the mess and run the script again. This +might happen if the new packages conflict with one of the old +packages. dpkg is unable to remove, while apt can do this.

+ +

It take one option, a package to ignore in the list of packages to +upgrade. The option to ignore a package is there to be able to skip +the packages that are simply too large to unpack. Today this was +'ghc', but I have run into other large packages causing similar +problems earlier (like TeX).

+ +

Update 2018-07-08: Thanks to Paul Wise, I am aware of two +alternative ways to handle this. The "unattended-upgrades +--minimal-upgrade-steps" option will try to calculate upgrade sets for +each package to upgrade, and then upgrade them in order, smallest set +first. It might be a better option than my above mentioned script. +Also, "aptutude upgrade" can upgrade single packages, thus avoiding +the need for using "dpkg -i" in the script above.

-

Ingen av opplysningene vil bli brukt til å identifisere -enkeltpersoner. NAV bruker disse opplysningene til å generere en -samlet statistikk som blant annet viser hvilke sider som er mest -populære. Statistikken er et redskap til å forbedre våre -tjenester.»

- -

- -

Jeg klarer ikke helt å se hvordan analyse av de besøkendes -IP-adresser for å se hvem som sender inn meldekort via web fra en -IP-adresse i utlandet kan gjøres uten å komme i strid med påstanden om -at «ingen av opplysningene vil bli brukt til å identifisere -enkeltpersoner». Det virker dermed for meg som at NAV bryter sine -egen personvernerklæring, hvilket -Datatilsynet -fortalte meg i starten av desember antagelig er brudd på -personopplysningsloven. - -

I tillegg er personvernerklæringen ganske misvisende i og med at -NAVs nettsider ikke bare forsyner NAV med personopplysninger, men i -tillegg ber brukernes nettleser kontakte fem andre nettjenere -(script.hotjar.com, static.hotjar.com, vars.hotjar.com, -www.google-analytics.com og www.googletagmanager.com), slik at -personopplysninger blir gjort tilgjengelig for selskapene Hotjar og -Google , og alle som kan lytte på trafikken på veien (som FRA, GCHQ og -NSA). Jeg klarer heller ikke se hvordan slikt spredning av -personopplysninger kan være i tråd med kravene i -personopplysningloven, eller i tråd med NAVs personvernerklæring.

- -

Kanskje NAV bør ta en nøye titt på sin personvernerklæring? Eller -kanskje Datatilsynet bør gjøre det?

+

As usual, if you use Bitcoin and want to show your support of my +activities, please send Bitcoin donations to my address +15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b.

- Tags: norsk, nuug, personvern, surveillance. + Tags: debian, english.
@@ -458,164 +690,32 @@ kanskje Datatilsynet bør gjøre det?

-
Where did that package go? — geolocated IP traceroute
-
9th January 2017
-

Did you ever wonder where the web trafic really flow to reach the -web servers, and who own the network equipment it is flowing through? -It is possible to get a glimpse of this from using traceroute, but it -is hard to find all the details. Many years ago, I wrote a system to -map the Norwegian Internet (trying to figure out if our plans for a -network game service would get low enough latency, and who we needed -to talk to about setting up game servers close to the users. Back -then I used traceroute output from many locations (I asked my friends -to run a script and send me their traceroute output) to create the -graph and the map. The output from traceroute typically look like -this: - -

-traceroute to www.stortinget.no (85.88.67.10), 30 hops max, 60 byte packets
- 1  uio-gw10.uio.no (129.240.202.1)  0.447 ms  0.486 ms  0.621 ms
- 2  uio-gw8.uio.no (129.240.24.229)  0.467 ms  0.578 ms  0.675 ms
- 3  oslo-gw1.uninett.no (128.39.65.17)  0.385 ms  0.373 ms  0.358 ms
- 4  te3-1-2.br1.fn3.as2116.net (193.156.90.3)  1.174 ms  1.172 ms  1.153 ms
- 5  he16-1-1.cr1.san110.as2116.net (195.0.244.234)  2.627 ms he16-1-1.cr2.oslosda310.as2116.net (195.0.244.48)  3.172 ms he16-1-1.cr1.san110.as2116.net (195.0.244.234)  2.857 ms
- 6  ae1.ar8.oslosda310.as2116.net (195.0.242.39)  0.662 ms  0.637 ms ae0.ar8.oslosda310.as2116.net (195.0.242.23)  0.622 ms
- 7  89.191.10.146 (89.191.10.146)  0.931 ms  0.917 ms  0.955 ms
- 8  * * *
- 9  * * *
-[...]
-

- -

This show the DNS names and IP addresses of (at least some of the) -network equipment involved in getting the data traffic from me to the -www.stortinget.no server, and how long it took in milliseconds for a -package to reach the equipment and return to me. Three packages are -sent, and some times the packages do not follow the same path. This -is shown for hop 5, where three different IP addresses replied to the -traceroute request.

- -

There are many ways to measure trace routes. Other good traceroute -implementations I use are traceroute (using ICMP packages) mtr (can do -both ICMP, UDP and TCP) and scapy (python library with ICMP, UDP, TCP -traceroute and a lot of other capabilities). All of them are easily -available in Debian.

- -

This time around, I wanted to know the geographic location of -different route points, to visualize how visiting a web page spread -information about the visit to a lot of servers around the globe. The -background is that a web site today often will ask the browser to get -from many servers the parts (for example HTML, JSON, fonts, -JavaScript, CSS, video) required to display the content. This will -leak information about the visit to those controlling these servers -and anyone able to peek at the data traffic passing by (like your ISP, -the ISPs backbone provider, FRA, GCHQ, NSA and others).

- -

Lets pick an example, the Norwegian parliament web site -www.stortinget.no. It is read daily by all members of parliament and -their staff, as well as political journalists, activits and many other -citizens of Norway. A visit to the www.stortinget.no web site will -ask your browser to contact 8 other servers: ajax.googleapis.com, -insights.hotjar.com, script.hotjar.com, static.hotjar.com, -stats.g.doubleclick.net, www.google-analytics.com, -www.googletagmanager.com and www.netigate.se. I extracted this by -asking PhantomJS to visit the -Stortinget web page and tell me all the URLs PhantomJS downloaded to -render the page (in HAR format using -their -netsniff example. I am very grateful to Gorm for showing me how -to do this). My goal is to visualize network traces to all IP -addresses behind these DNS names, do show where visitors personal -information is spread when visiting the page.

- -

map of combined traces for URLs used by www.stortinget.no using GeoIP

- -

When I had a look around for options, I could not find any good -free software tools to do this, and decided I needed my own traceroute -wrapper outputting KML based on locations looked up using GeoIP. KML -is easy to work with and easy to generate, and understood by several -of the GIS tools I have available. I got good help from by NUUG -colleague Anders Einar with this, and the result can be seen in -my -kmltraceroute git repository. Unfortunately, the quality of the -free GeoIP databases I could find (and the for-pay databases my -friends had access to) is not up to the task. The IP addresses of -central Internet infrastructure would typically be placed near the -controlling companies main office, and not where the router is really -located, as you can see from the -KML file I created using the GeoLite City dataset from MaxMind. - -

scapy traceroute graph for URLs used by www.stortinget.no

- -

I also had a look at the visual traceroute graph created by -the scrapy project, -showing IP network ownership (aka AS owner) for the IP address in -question. -The -graph display a lot of useful information about the traceroute in SVG -format, and give a good indication on who control the network -equipment involved, but it do not include geolocation. This graph -make it possible to see the information is made available at least for -UNINETT, Catchcom, Stortinget, Nordunet, Google, Amazon, Telia, Level -3 Communications and NetDNA.

- -

example geotraceroute view for www.stortinget.no

- -

In the process, I came across the -web service GeoTraceroute by -Salim Gasmi. Its methology of combining guesses based on DNS names, -various location databases and finally use latecy times to rule out -candidate locations seemed to do a very good job of guessing correct -geolocation. But it could only do one trace at the time, did not have -a sensor in Norway and did not make the geolocations easily available -for postprocessing. So I contacted the developer and asked if he -would be willing to share the code (he refused until he had time to -clean it up), but he was interested in providing the geolocations in a -machine readable format, and willing to set up a sensor in Norway. So -since yesterday, it is possible to run traces from Norway in this -service thanks to a sensor node set up by -the NUUG assosiation, and get the -trace in KML format for further processing.

- -

map of combined traces for URLs used by www.stortinget.no using geotraceroute

- -

Here we can see a lot of trafic passes Sweden on its way to -Denmark, Germany, Holland and Ireland. Plenty of places where the -Snowden confirmations verified the traffic is read by various actors -without your best interest as their top priority.

- -

Combining KML files is trivial using a text editor, so I could loop -over all the hosts behind the urls imported by www.stortinget.no and -ask for the KML file from GeoTraceroute, and create a combined KML -file with all the traces (unfortunately only one of the IP addresses -behind the DNS name is traced this time. To get them all, one would -have to request traces using IP number instead of DNS names from -GeoTraceroute). That might be the next step in this project.

- -

Armed with these tools, I find it a lot easier to figure out where -the IP traffic moves and who control the boxes involved in moving it. -And every time the link crosses for example the Swedish border, we can -be sure Swedish Signal Intelligence (FRA) is listening, as GCHQ do in -Britain and NSA in USA and cables around the globe. (Hm, what should -we tell them? :) Keep that in mind if you ever send anything -unencrypted over the Internet.

- -

PS: KML files are drawn using -the KML viewer from Ivan -Rublev, as it was less cluttered than the local Linux application -Marble. There are heaps of other options too.

+
The worlds only stone power plant?
+
30th June 2018
+

So far, at least hydro-electric power, coal power, wind power, +solar power, and wood power are well known. Until a few days ago, I +had never heard of stone power. Then I learn about a quarry in a +mountain in +Bremanger i +Norway, where +the +Bremanger Quarry company is extracting stone and dumping the stone +into a shaft leading to its shipping harbour. This downward movement +in this shaft is used to produce electricity. In short, it is using +falling rocks instead of falling water to produce electricity, and +according to its own statements it is producing more power than it is +using, and selling the surplus electricity to the Norwegian power +grid. I find the concept truly amazing. Is this the worlds only +stone power plant?

As usual, if you use Bitcoin and want to show your support of my activities, please send Bitcoin donations to my address -15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b.

+15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b.

- Tags: debian, english, kart, nuug, personvern, stortinget, surveillance, web. + Tags: english.
@@ -623,77 +723,66 @@ activities, please send Bitcoin donations to my address
-
Introducing ical-archiver to split out old iCalendar entries
-
4th January 2017
-

Do you have a large iCalendar -file with lots of old entries, and would like to archive them to save -space and resources? At least those of us using KOrganizer know that -turning on and off an event set become slower and slower the more -entries are in the set. While working on migrating our calendars to a -Radicale CalDAV server on our -Freedombox server, my -loved one wondered if I could find a way to split up the calendar file -she had in KOrganizer, and I set out to write a tool. I spent a few -days writing and polishing the system, and it is now ready for general -consumption. The -code for -ical-archiver is publicly available from a git repository on -github. The system is written in Python and depend on -the vobject Python -module.

- -

To use it, locate the iCalendar file you want to operate on and -give it as an argument to the ical-archiver script. This will -generate a set of new files, one file per component type per year for -all components expiring more than two years in the past. The vevent, -vtodo and vjournal entries are handled by the script. The remaining -entries are stored in a 'remaining' file.

- -

This is what a test run can look like: - -

-% ical-archiver t/2004-2016.ics 
-Found 3612 vevents
-Found 6 vtodos
-Found 2 vjournals
-Writing t/2004-2016.ics-subset-vevent-2004.ics
-Writing t/2004-2016.ics-subset-vevent-2005.ics
-Writing t/2004-2016.ics-subset-vevent-2006.ics
-Writing t/2004-2016.ics-subset-vevent-2007.ics
-Writing t/2004-2016.ics-subset-vevent-2008.ics
-Writing t/2004-2016.ics-subset-vevent-2009.ics
-Writing t/2004-2016.ics-subset-vevent-2010.ics
-Writing t/2004-2016.ics-subset-vevent-2011.ics
-Writing t/2004-2016.ics-subset-vevent-2012.ics
-Writing t/2004-2016.ics-subset-vevent-2013.ics
-Writing t/2004-2016.ics-subset-vevent-2014.ics
-Writing t/2004-2016.ics-subset-vjournal-2007.ics
-Writing t/2004-2016.ics-subset-vjournal-2011.ics
-Writing t/2004-2016.ics-subset-vtodo-2012.ics
-Writing t/2004-2016.ics-remaining.ics
-%
-

- -

As you can see, the original file is untouched and new files are -written with names derived from the original file. If you are happy -with their content, the *-remaining.ics file can replace the original -the the others can be archived or imported as historical calendar -collections.

- -

The script should probably be improved a bit. The error handling -when discovering broken entries is not good, and I am not sure yet if -it make sense to split different entry types into separate files or -not. The program is thus likely to change. If you find it -interesting, please get in touch. :)

+
Add-on to control the projector from within Kodi
+
26th June 2018
+

My movie playing setup involve Kodi, +OpenELEC (probably soon to be +replaced with LibreELEC) and an +Infocus IN76 video projector. My projector can be controlled via both +a infrared remote controller, and a RS-232 serial line. The vendor of +my projector, InFocus, had been +sensible enough to document the serial protocol in its user manual, so +it is easily available, and I used it some years ago to write +a +small script to control the projector. For a while now, I longed +for a setup where the projector was controlled by Kodi, for example in +such a way that when the screen saver went on, the projector was +turned off, and when the screen saver exited, the projector was turned +on again.

+ +

A few days ago, with very good help from parts of my family, I +managed to find a Kodi Add-on for controlling a Epson projector, and +got in touch with its author to see if we could join forces and make a +Add-on with support for several projectors. To my pleasure, he was +positive to the idea, and we set out to add InFocus support to his +add-on, and make the add-on suitable for the official Kodi add-on +repository.

+ +

The Add-on is now working (for me, at least), with a few minor +adjustments. The most important change I do relative to the master +branch in the github repository is embedding the +pyserial module in +the add-on. The long term solution is to make a "script" type +pyserial module for Kodi, that can be pulled in as a dependency in +Kodi. But until that in place, I embed it.

+ +

The add-on can be configured to turn on the projector when Kodi +starts, off when Kodi stops as well as turn the projector off when the +screensaver start and on when the screesaver stops. It can also be +told to set the projector source when turning on the projector. + +

If this sound interesting to you, check out +the +project github repository. Perhaps you can send patches to +support your projector too? As soon as we find time to wrap up the +latest changes, it should be available for easy installation using any +Kodi instance.

+ +

For future improvements, I would like to add projector model +detection and the ability to adjust the brightness level of the +projector from within Kodi. We also need to figure out how to handle +the cooling period of the projector. My projector refuses to turn on +for 60 seconds after it was turned off. This is not handled well by +the add-on at the moment.

As usual, if you use Bitcoin and want to show your support of my activities, please send Bitcoin donations to my address -15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b.

+15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b.

- Tags: english, standard. + Tags: english, multimedia, video.
@@ -708,6 +797,25 @@ activities, please send Bitcoin donations to my address

Archive