X-Git-Url: http://pere.pagekite.me/gitweb/homepage.git/blobdiff_plain/35bcc4f0426043d390b78cd27c2f0959ad39c3ca..eb973c52f2e5a325c7ca6df9b9ff95d4f0dc3100:/blog/index.html diff --git a/blog/index.html b/blog/index.html index 6f4b0e816a..caec1056c6 100644 --- a/blog/index.html +++ b/blog/index.html @@ -20,34 +20,19 @@
-
Self-appointed leaders of the Free World
-
22nd March 2018
-

The leaders of the worlds have started to congratulate the -re-elected Russian head of state, and this causes some criticism. I -am though a little fascinated by a comment from USA senator John McCain, -sited -by The Hill and others: - -

-

"An American president does not lead the Free World by -congratulating dictators on winning sham elections."

-

- -

While I totally agree with the senator here, the way the quote is -phrased make me suspect that he is unaware of the simple fact that USA -have not lead the Free World since at least before its government -kidnapped a -completely innocent Canadian citizen in transit on his way home to -Canada via John F. Kennedy International Airport in September 2002 and -sent him to be tortured in Syria for a year.

- -

USA might be running ahead, but the path they are taking is not the -one taken by any Free World.

+
Software created using taxpayers’ money should be Free Software
+
30th August 2018
+

It might seem obvious that software created using tax money should +be available for everyone to use and improve. Free Software +Foundation Europe recentlystarted a campaign to help get more people +to understand this, and I just signed the petition on +Public Money, Public Code to help +them. I hope you too will do the same.

- Tags: english. + Tags: english, opphavsrett.
@@ -55,63 +40,71 @@ one taken by any Free World.

-
Facebooks ability to sell your personal information is the real Cambridge Analytica scandal
-
21st March 2018
-

So, Cambridge Analytica is getting some well deserved criticism for -(mis)using information it got from Facebook about 50 million people, -mostly in the USA. What I find a bit surprising, is how little -criticism Facebook is getting for handing the information over to -Cambridge Analytica and others in the first place. And what about the -people handing their private and personal information to Facebook? -And last, but not least, what about the government offices who are -handing information about the visitors of their web pages to Facebook? -No-one who looked at the terms of use of Facebook should be surprised -that information about peoples interests, political views, personal -lifes and whereabouts would be sold by Facebook.

- -

What I find to be the real scandal is the fact that Facebook is -selling your personal information, not that one of the buyers used it -in a way Facebook did not approve when exposed. It is well known that -Facebook is selling out their users privacy, but a scandal -nevertheless. Of course the information provided to them by Facebook -would be misused by one of the parties given access to personal -information about the millions of Facebook users. Collected -information will be misused sooner or later. The only way to avoid -such misuse, is to not collect the information in the first place. If -you do not want Facebook to hand out information about yourself for -the use and misuse of its customers, do not give Facebook the -information.

- -

Personally, I would recommend to completely remove your Facebook -account, and take back some control of your personal information. -According -to The Guardian, it is a bit hard to find out how to request -account removal (and not just 'disabling'). You need to -visit -a specific Facebook page and click on 'let us know' on that page -to get to the -real account deletion screen. Perhaps something to consider? I -would not trust the information to really be deleted (who knows, -perhaps NSA, GCHQ and FRA already got a copy), but it might reduce the -exposure a bit.

- -

If you want to learn more about the capabilities of Cambridge -Analytica, I recommend to see the video recording of the one hour talk -Paul-Olivier Dehaye gave to NUUG last april about - -Data collection, psychometric profiling and their impact on -politics.

- -

And if you want to communicate with your friends and loved ones, -use some end-to-end encrypted method like -Signal or -Ring, and stop sharing your private -messages with strangers like Facebook and Google.

+
A bit more on privacy respecting health monitor / fitness tracker
+
13th August 2018
+

A few days ago, I wondered if there are any privacy respecting +health monitors and/or fitness trackers available for sale these days. +I would like to buy one, but do not want to share my personal data +with strangers, nor be forced to have a mobile phone to get data out +of the unit. I've received some ideas, and would like to share them +with you. + +One interesting data point was a pointer to a Free Software app for +Android named +Gadgetbridge. +It provide cloudless collection and storing of data from a variety of +trackers. Its +list +of supported devices is a good indicator for units where the +protocol is fairly open, as it is obviously being handled by Free +Software. Other units are reportedly encrypting the collected +information with their own public key, making sure only the vendor +cloud service is able to extract data from the unit. The people +contacting me about Gadgetbirde said they were using +Amazfit +Bip and +Xiaomi +Band 3.

+ +

I also got a suggestion to look at some of the units from Garmin. +I was told their GPS watches can be connected via USB and show up as a +USB storage device with +Garmin +FIT files containing the collected measurements. While +proprietary, FIT files apparently can be read at least by +GPSBabel and the +GpxPod Nextcloud +app. It is unclear to me if they can read step count and heart rate +data. The person I talked to was using a +Garmin Forerunner +935, which is a fairly expensive unit. I doubt it is worth it for +a unit where the vendor clearly is trying its best to move from open +to closed systems. I still remember when Garmin dropped NMEA support +in its GPSes.

+ +

A final idea was to build ones own unit, perhaps by basing it on a +wearable hardware platforms like +the Flora Geo +Watch. Sound like fun, but I had more money than time to spend on +the topic, so I suspect it will have to wait for another time.

+ +

While I was working on tracking down links, I came across an +inspiring TED talk by Dave Debronkart about +being a +e-patient, and discovered the web site +Participatory +Medicine. If you too want to track your own health and fitness +without having information about your private life floating around on +computers owned by others, I recommend checking it out.

+ +

As usual, if you use Bitcoin and want to show your support of my +activities, please send Bitcoin donations to my address +15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b.

- Tags: english, personvern. + Tags: english.
@@ -119,67 +112,36 @@ messages with strangers like Facebook and Google.

-
H, Ap, Frp og Venstre går for DNA-innsamling av hele befolkningen
-
14th March 2018
-

I går kom det nok et argument for å holde seg unna det norske -helsevesenet. Da annonserte et stortingsflertall, bestående av Høyre, -Arbeiderpartiet, Fremskrittspartiet og Venstre, at de går inn for å -samle inn og lagre DNA-prøver fra hele befolkningen i Norge til evig -tid. Endringen gjelder innsamlede blodprøver fra nyfødte i Norge. -Det vil dermed ta litt tid før en har hele befolkningen, men det er -dit vi havner gitt nok tid. I dag er det nesten hundre prosent -oppslutning om undersøkelsen som gjøres like etter fødselen, på -bakgrunn av blodprøven det er snakk om å lagre, for å oppdage endel -medfødte sykdommer. Blodprøven lagres i dag i inntil seks år. -Stortingets -flertallsinnstilling er at tidsbegrensingen skal fjernes, og mener -at tidsubegrenset lagring ikke vil påvirke oppslutningen om -undersøkelsen.

- -

Datatilsynet har ikke akkurat applaudert forslaget:

- -

- -

«Datatilsynet mener forslaget ikke i tilstrekkelig grad - synliggjør hvilke etiske og personvernmessige utfordringer som må - diskuteres før en etablerer en nasjonal biobank med blodprøver fra - hele befolkningen.»

- -

- -

Det er flere historier om hvordan innsamlet biologisk materiale har -blitt brukt til andre formål enn de ble innsamlet til, og historien om -folkehelseinstituttets -lagring på vegne av politiet (Kripos) av innsamlet biologisk materiale -og DNA-informasjon i strid med loven viser at en ikke kan være -trygg på at lover og intensjoner beskytter de som blir berørt mot -misbruk av slik privat og personlig informasjon.

- -

Det er verdt å merke seg at det kan forskes på de innsamlede -blodprøvene uten samtykke fra den det gjelder (eller foreldre når det -gjelder barn), etter en lovendring for en stund tilbake, med mindre -det er sendt inn skjema der en reserverer seg mot forskning uten -samtykke. Skjemaet er tilgjengelig fra -folkehelseinstituttets -websider, og jeg anbefaler, uavhengig av denne saken, varmt alle å -sende inn skjemaet for å dokumentere hvor mange som ikke synes det er -greit å fjerne krav om samtykke.

- -

I tillegg bør en kreve destruering av alt biologisk materiale som -er samlet inn om en selv, for å redusere eventuelle negative -konsekvenser i fremtiden når materialet kommer på avveie eller blir -brukt uten samtykke, men det er så vidt jeg vet ikke noe system for -dette i dag.

- -

Som vanlig, hvis du bruker Bitcoin og ønsker å vise din støtte til -det jeg driver med, setter jeg pris på om du sender Bitcoin-donasjoner -til min adresse +

Privacy respecting health monitor / fitness tracker?
+
7th August 2018
+

Dear lazyweb,

+ +

I wonder, is there a fitness tracker / health monitor available for +sale today that respect the users privacy? With this I mean a +watch/bracelet capable of measuring pulse rate and other +fitness/health related values (and by all means, also the correct time +and location if possible), which is only provided for +me to extract/read from the unit with computer without a radio beacon +and Internet connection. In other words, it do not depend on a cell +phone app, and do make the measurements available via other peoples +computer (aka "the cloud"). The collected data should be available +using only free software. I'm not interested in depending on some +non-free software that will leave me high and dry some time in the +future. I've been unable to find any such unit. I would like to buy +it. The ones I have seen for sale here in Norway are proud to report +that they share my health data with strangers (aka "cloud enabled"). +Is there an alternative? I'm not interested in giving money to people +requiring me to accept "privacy terms" to allow myself to measure my +own health.

+ +

As usual, if you use Bitcoin and want to show your support of my +activities, please send Bitcoin donations to my address 15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b.

- Tags: norsk, personvern, surveillance. + Tags: english.
@@ -187,53 +149,66 @@ til min adresse
-
First rough draft Norwegian and Spanish edition of the book Made with Creative Commons
-
13th March 2018
-

I am working on publishing yet another book related to Creative -Commons. This time it is a book filled with interviews and histories -from those around the globe making a living using Creative -Commons.

- -

Yesterday, after many months of hard work by several volunteer -translators, the first draft of a Norwegian Bokmål edition of the book -Made with Creative Commons from 2017 -was complete. The Spanish translation is also complete, while the -Dutch, Polish, German and Ukraine edition need a lot of work. Get in -touch if you want to help make those happen, or would like to -translate into your mother tongue.

- -

The whole book project started when -Gunnar Wolf announced that he -was going to make a Spanish edition of the book. I noticed, and -offered some input on how to make a book, based on my experience with -translating the -Free -Culture and -The Debian -Administrator's Handbook books to Norwegian Bokmål. To make a -long story short, we ended up working on a Bokmål edition, and now the -first rough translation is complete, thanks to the hard work of -Ole-Erik Yrvin, Ingrid Yrvin, Allan Nordhøy and myself. The first -proof reading is almost done, and only the second and third proof -reading remains. We will also need to translate the 14 figures and -create a book cover. Once it is done we will publish the book on -paper, as well as in PDF, ePub and possibly Mobi formats.

- -

The book itself originates as a manuscript on Google Docs, is -downloaded as ODT from there and converted to Markdown using pandoc. -The Markdown is modified by a script before is converted to DocBook -using pandoc. The DocBook is modified again using a script before it -is used to create a Gettext POT file for translators. The translated -PO file is then combined with the earlier mentioned DocBook file to -create a translated DocBook file, which finally is given to dblatex to -create the final PDF. The end result is a set of editions of the -manuscript, one English and one for each of the translations.

- -

The translation is conducted using -the -Weblate web based translation system. Please have a look there -and get in touch if you would like to help out with proof -reading. :)

+
Sharing images with friends and family using RSS and EXIF/XMP metadata
+
31st July 2018
+

For a while now, I have looked for a sensible way to share images +with my family using a self hosted solution, as it is unacceptable to +place images from my personal life under the control of strangers +working for data hoarders like Google or Dropbox. The last few days I +have drafted an approach that might work out, and I would like to +share it with you. I would like to publish images on a server under +my control, and point some Internet connected display units using some +free and open standard to the images I published. As my primary +language is not limited to ASCII, I need to store metadata using +UTF-8. Many years ago, I hoped to find a digital photo frame capable +of reading a RSS feed with image references (aka using the +<enclosure> RSS tag), but was unable to find a current supplier +of such frames. In the end I gave up that approach.

+ +

Some months ago, I discovered that +XScreensaver is able to +read images from a RSS feed, and used it to set up a screen saver on +my home info screen, showing images from the Daily images feed from +NASA. This proved to work well. More recently I discovered that +Kodi (both using +OpenELEC and +LibreELEC) provide the +Feedreader +screen saver capable of reading a RSS feed with images and news. For +fun, I used it this summer to test Kodi on my parents TV by hooking up +a Raspberry PI unit with LibreELEC, and wanted to provide them with a +screen saver showing selected pictures from my selection.

+ +

Armed with motivation and a test photo frame, I set out to generate +a RSS feed for the Kodi instance. I adjusted my Freedombox instance, created +/var/www/html/privatepictures/, wrote a small Perl script to extract +title and description metadata from the photo files and generate the +RSS file. I ended up using Perl instead of python, as the +libimage-exiftool-perl Debian package seemed to handle the EXIF/XMP +tags I ended up using, while python3-exif did not. The relevant EXIF +tags only support ASCII, so I had to find better alternatives. XMP +seem to have the support I need.

+ +

I am a bit unsure which EXIF/XMP tags to use, as I would like to +use tags that can be easily added/updated using normal free software +photo managing software. I ended up using the tags set using this +exiftool command, as these tags can also be set using digiKam:

+ +
+exiftool -headline='The RSS image title' \
+  -description='The RSS image description.' \
+  -subject+=for-family photo.jpeg
+
+ +

I initially tried the "-title" and "keyword" tags, but they were +invisible in digiKam, so I changed to "-headline" and "-subject". I +use the keyword/subject 'for-family' to flag that the photo should be +shared with my family. Images with this keyword set are located and +copied into my Freedombox for the RSS generating script to find.

+ +

Are there better ways to do this? Get in touch if you have better +suggestions.

As usual, if you use Bitcoin and want to show your support of my activities, please send Bitcoin donations to my address @@ -242,7 +217,7 @@ activities, please send Bitcoin donations to my address

- Tags: docbook, english. + Tags: debian, english.
@@ -250,45 +225,96 @@ activities, please send Bitcoin donations to my address
-
Debian used in the subway info screens in Oslo, Norway
-
2nd March 2018
-

Today I was pleasantly surprised to discover my operating system of -choice, Debian, was used in the info screens on the subway stations. -While passing Nydalen subway station in Oslo, Norway, I discovered the -info screen booting with some text scrolling. I was not quick enough -with my camera to be able to record a video of the scrolling boot -screen, but I did get a photo from when the boot got stuck with a -corrupt file system: - -

[photo of subway info screen]

- -

While I am happy to see Debian used more places, some details of the -content on the screen worries me.

- -

The image show the version booting is 'Debian GNU/Linux lenny/sid', -indicating that this is based on code taken from Debian Unstable/Sid -after Debian Etch (version 4) was released 2007-04-08 and before -Debian Lenny (version 5) was released 2009-02-14. Since Lenny Debian -has released version 6 (Squeeze) 2011-02-06, 7 (Wheezy) 2013-05-04, 8 -(Jessie) 2015-04-25 and 9 (Stretch) 2017-06-15, according to -a Debian -version history on Wikpedia. This mean the system is running -around 10 year old code, with no security fixes from the vendor for -many years.

- -

This is not the first time I discover the Oslo subway company, -Ruter, running outdated software. In 2012, -I -discovered the ticket vending machines were running Windows 2000, -and this was -still -the case in 2016. Given the response from the responsible people -in 2016, I would assume the machines are still running unpatched -Windows 2000. Thus, an unpatched Debian setup come as no surprise.

- -

The photo is made available under the license terms -Creative Commons -4.0 Attribution International (CC BY 4.0).

+
Simple streaming the Linux desktop to Kodi using GStreamer and RTP
+
12th July 2018
+

Last night, I wrote +a +recipe to stream a Linux desktop using VLC to a instance of Kodi. +During the day I received valuable feedback, and thanks to the +suggestions I have been able to rewrite the recipe into a much simpler +approach requiring no setup at all. It is a single script that take +care of it all.

+ +

This new script uses GStreamer instead of VLC to capture the +desktop and stream it to Kodi. This fixed the video quality issue I +saw initially. It further removes the need to add a m3u file on the +Kodi machine, as it instead connects to +the JSON-RPC API in +Kodi and simply ask Kodi to play from the stream created using +GStreamer. Streaming the desktop to Kodi now become trivial. Copy +the script below, run it with the DNS name or IP address of the kodi +server to stream to as the only argument, and watch your screen show +up on the Kodi screen. Note, it depend on multicast on the local +network, so if you need to stream outside the local network, the +script must be modified. Also note, I have no idea if audio work, as +I only care about the picture part.

+ +
+#!/bin/sh
+#
+# Stream the Linux desktop view to Kodi.  See
+# http://people.skolelinux.org/pere/blog/Streaming_the_Linux_desktop_to_Kodi_using_VLC_and_RTSP.html
+# for backgorund information.
+
+# Make sure the stream is stopped in Kodi and the gstreamer process is
+# killed if something go wrong (for example if curl is unable to find the
+# kodi server).  Do the same when interrupting this script.
+kodicmd() {
+    host="$1"
+    cmd="$2"
+    params="$3"
+    curl --silent --header 'Content-Type: application/json' \
+	 --data-binary "{ \"id\": 1, \"jsonrpc\": \"2.0\", \"method\": \"$cmd\", \"params\": $params }" \
+	 "http://$host/jsonrpc"
+}
+cleanup() {
+    if [ -n "$kodihost" ] ; then
+	# Stop the playing when we end
+	playerid=$(kodicmd "$kodihost" Player.GetActivePlayers "{}" |
+			    jq .result[].playerid)
+	kodicmd "$kodihost" Player.Stop "{ \"playerid\" : $playerid }" > /dev/null
+    fi
+    if [ "$gstpid" ] && kill -0 "$gstpid" >/dev/null 2>&1; then
+	kill "$gstpid"
+    fi
+}
+trap cleanup EXIT INT
+
+if [ -n "$1" ]; then
+    kodihost=$1
+    shift
+else
+    kodihost=kodi.local
+fi
+
+mcast=239.255.0.1
+mcastport=1234
+mcastttl=1
+
+pasrc=$(pactl list | grep -A2 'Source #' | grep 'Name: .*\.monitor$' | \
+  cut -d" " -f2|head -1)
+gst-launch-1.0 ximagesrc use-damage=0 ! video/x-raw,framerate=30/1 ! \
+  videoconvert ! queue2 ! \
+  x264enc bitrate=8000 speed-preset=superfast tune=zerolatency qp-min=30 \
+  key-int-max=15 bframes=2 ! video/x-h264,profile=high ! queue2 ! \
+  mpegtsmux alignment=7 name=mux ! rndbuffersize max=1316 min=1316 ! \
+  udpsink host=$mcast port=$mcastport ttl-mc=$mcastttl auto-multicast=1 sync=0 \
+  pulsesrc device=$pasrc ! audioconvert ! queue2 ! avenc_aac ! queue2 ! mux. \
+  > /dev/null 2>&1 &
+gstpid=$!
+
+# Give stream a second to get going
+sleep 1
+
+# Ask kodi to start streaming using its JSON-RPC API
+kodicmd "$kodihost" Player.Open \
+	"{\"item\": { \"file\": \"udp://@$mcast:$mcastport\" } }" > /dev/null
+
+# wait for gst to end
+wait "$gstpid"
+
+ +

I hope you find the approach useful. I know I do.

As usual, if you use Bitcoin and want to show your support of my activities, please send Bitcoin donations to my address @@ -297,7 +323,7 @@ activities, please send Bitcoin donations to my address

- Tags: english, ruter. + Tags: debian, english, video.
@@ -305,30 +331,143 @@ activities, please send Bitcoin donations to my address
-
The SysVinit upstream project just migrated to git
-
18th February 2018
-

Surprising as it might sound, there are still computers using the -traditional Sys V init system, and there probably will be until -systemd start working on Hurd and FreeBSD. -The upstream -project still exist, though, and up until today, the upstream -source was available from Savannah via subversion. I am happy to -report that this just changed.

- -

The upstream source is now in Git, and consist of three -repositories:

- - - -

I do not really spend much time on the project these days, and I -has mostly retired, but found it best to migrate the source to a good -version control system to help those willing to move it forward.

+
Streaming the Linux desktop to Kodi using VLC and RTSP
+
12th July 2018
+

PS: See +the +followup post for a even better approach.

+ +

A while back, I was asked by a friend how to stream the desktop to +my projector connected to Kodi. I sadly had to admit that I had no +idea, as it was a task I never had tried. Since then, I have been +looking for a way to do so, preferable without much extra software to +install on either side. Today I found a way that seem to kind of +work. Not great, but it is a start.

+ +

I had a look at several approaches, for example +using uPnP +DLNA as described in 2011, but it required a uPnP server, fuse and +local storage enough to store the stream locally. This is not going +to work well for me, lacking enough free space, and it would +impossible for my friend to get working.

+ +

Next, it occurred to me that perhaps I could use VLC to create a +video stream that Kodi could play. Preferably using +broadcast/multicast, to avoid having to change any setup on the Kodi +side when starting such stream. Unfortunately, the only recipe I +could find using multicast used the rtp protocol, and this protocol +seem to not be supported by Kodi.

+ +

On the other hand, the rtsp protocol is working! Unfortunately I +have to specify the IP address of the streaming machine in both the +sending command and the file on the Kodi server. But it is showing my +desktop, and thus allow us to have a shared look on the big screen at +the programs I work on.

+ +

I did not spend much time investigating codeces. I combined the +rtp and rtsp recipes from +the +VLC Streaming HowTo/Command Line Examples, and was able to get +this working on the desktop/streaming end.

+ +
+vlc screen:// --sout \
+  '#transcode{vcodec=mp4v,acodec=mpga,vb=800,ab=128}:rtp{dst=projector.local,port=1234,sdp=rtsp://192.168.11.4:8080/test.sdp}'
+
+ +

I ssh-ed into my Kodi box and created a file like this with the +same IP address:

+ +
+echo rtsp://192.168.11.4:8080/test.sdp \
+  > /storage/videos/screenstream.m3u
+
+ +

Note the 192.168.11.4 IP address is my desktops IP address. As far +as I can tell the IP must be hardcoded for this to work. In other +words, if someone elses machine is going to do the steaming, you have +to update screenstream.m3u on the Kodi machine and adjust the vlc +recipe. To get started, locate the file in Kodi and select the m3u +file while the VLC stream is running. The desktop then show up in my +big screen. :)

+ +

When using the same technique to stream a video file with audio, +the audio quality is really bad. No idea if the problem is package +loss or bad parameters for the transcode. I do not know VLC nor Kodi +enough to tell.

+ +

Update 2018-07-12: Johannes Schauer send me a few +succestions and reminded me about an important step. The "screen:" +input source is only available once the vlc-plugin-access-extra +package is installed on Debian. Without it, you will see this error +message: "VLC is unable to open the MRL 'screen://'. Check the log +for details." He further found that it is possible to drop some parts +of the VLC command line to reduce the amount of hardcoded information. +It is also useful to consider using cvlc to avoid having the VLC +window in the desktop view. In sum, this give us this command line on +the source end + +

+cvlc screen:// --sout \
+  '#transcode{vcodec=mp4v,acodec=mpga,vb=800,ab=128}:rtp{sdp=rtsp://:8080/}'
+
+ +

and this on the Kodi end

+ +

+echo rtsp://192.168.11.4:8080/ \
+  > /storage/videos/screenstream.m3u
+
+ +

Still bad image quality, though. But I did discover that streaming +a DVD using dvdsimple:///dev/dvd as the source had excellent video and +audio quality, so I guess the issue is in the input or transcoding +parts, not the rtsp part. I've tried to change the vb and ab +parameters to use more bandwidth, but it did not make a +difference.

+ +

I further received a suggestion from Einar Haraldseid to try using +gstreamer instead of VLC, and this proved to work great! He also +provided me with the trick to get Kodi to use a multicast stream as +its source. By using this monstrous oneliner, I can stream my desktop +with good video quality in reasonable framerate to the 239.255.0.1 +multicast address on port 1234: + +

+gst-launch-1.0 ximagesrc use-damage=0 ! video/x-raw,framerate=30/1 ! \
+  videoconvert ! queue2 ! \
+  x264enc bitrate=8000 speed-preset=superfast tune=zerolatency qp-min=30 \
+  key-int-max=15 bframes=2 ! video/x-h264,profile=high ! queue2 ! \
+  mpegtsmux alignment=7 name=mux ! rndbuffersize max=1316 min=1316 ! \
+  udpsink host=239.255.0.1 port=1234 ttl-mc=1 auto-multicast=1 sync=0 \
+  pulsesrc device=$(pactl list | grep -A2 'Source #' | \
+    grep 'Name: .*\.monitor$' |  cut -d" " -f2|head -1) ! \
+  audioconvert ! queue2 ! avenc_aac ! queue2 ! mux.
+
+ +

and this on the Kodi end

+ +

+echo udp://@239.255.0.1:1234 \
+  > /storage/videos/screenstream.m3u
+
+ +

Note the trick to pick a valid pulseaudio source. It might not +pick the one you need. This approach will of course lead to trouble +if more than one source uses the same multicast port and address. +Note the ttl-mc=1 setting, which limit the multicast packages to the +local network. If the value is increased, your screen will be +broadcasted further, one network "hop" for each increase (read up on +multicast to learn more. :)!

+ +

Having cracked how to get Kodi to receive multicast streams, I +could use this VLC command to stream to the same multicast address. +The image quality is way better than the rtsp approach, but gstreamer +seem to be doing a better job.

+ +
+cvlc screen:// --sout '#transcode{vcodec=mp4v,acodec=mpga,vb=800,ab=128}:rtp{mux=ts,dst=239.255.0.1,port=1234,sdp=sap}'
+

As usual, if you use Bitcoin and want to show your support of my activities, please send Bitcoin donations to my address @@ -337,7 +476,7 @@ activities, please send Bitcoin donations to my address

- Tags: bootsystem, english. + Tags: debian, english, video.
@@ -345,70 +484,112 @@ activities, please send Bitcoin donations to my address
-
Using VLC to stream bittorrent sources
-
14th February 2018
-

A few days ago, a new major version of -VLC was announced, and I -decided to check out if it now supported streaming over -bittorrent and -webtorrent. Bittorrent is one of -the most efficient ways to distribute large files on the Internet, and -Webtorrent is a variant of Bittorrent using -WebRTC as its transport channel, -allowing web pages to stream and share files using the same technique. -The network protocols are similar but not identical, so a client -supporting one of them can not talk to a client supporting the other. -I was a bit surprised with what I discovered when I started to look. -Looking at -the release -notes did not help answering this question, so I started searching -the web. I found several news articles from 2013, most of them -tracing the news from Torrentfreak -("Open -Source Giant VLC Mulls BitTorrent Streaming Support"), about a -initiative to pay someone to create a VLC patch for bittorrent -support. To figure out what happend with this initiative, I headed -over to the #videolan IRC channel and asked if there were some bug or -feature request tickets tracking such feature. I got an answer from -lead developer Jean-Babtiste Kempf, telling me that there was a patch -but neither he nor anyone else knew where it was. So I searched a bit -more, and came across an independent -VLC plugin to add -bittorrent support, created by Johan Gunnarsson in 2016/2017. -Again according to Jean-Babtiste, this is not the patch he was talking -about.

- -

Anyway, to test the plugin, I made a working Debian package from -the git repository, with some modifications. After installing this -package, I could stream videos from -The Internet Archive using VLC -commands like this:

+
What is the most supported MIME type in Debian in 2018?
+
9th July 2018
+

Five years ago, +I +measured what the most supported MIME type in Debian was, by +analysing the desktop files in all packages in the archive. Since +then, the DEP-11 AppStream system has been put into production, making +the task a lot easier. This made me want to repeat the measurement, +to see how much things changed. Here are the new numbers, for +unstable only this time: + +

Debian Unstable:

+ +
+  count MIME type
+  ----- -----------------------
+     56 image/jpeg
+     55 image/png
+     49 image/tiff
+     48 image/gif
+     39 image/bmp
+     38 text/plain
+     37 audio/mpeg
+     34 application/ogg
+     33 audio/x-flac
+     32 audio/x-mp3
+     30 audio/x-wav
+     30 audio/x-vorbis+ogg
+     29 image/x-portable-pixmap
+     27 inode/directory
+     27 image/x-portable-bitmap
+     27 audio/x-mpeg
+     26 application/x-ogg
+     25 audio/x-mpegurl
+     25 audio/ogg
+     24 text/html
+
+ +

The list was created like this using a sid chroot: "cat +/var/lib/apt/lists/*sid*_dep11_Components-amd64.yml.gz| zcat | awk '/^ +- \S+\/\S+$/ {print $2 }' | sort | uniq -c | sort -nr | head -20"

+ +

It is interesting to see how image formats have passed text/plain +as the most announced supported MIME type. These days, thanks to the +AppStream system, if you run into a file format you do not know, and +want to figure out which packages support the format, you can find the +MIME type of the file using "file --mime <filename>", and then +look up all packages announcing support for this format in their +AppStream metadata (XML or .desktop file) using "appstreamcli +what-provides mimetype <mime-type>. For example if you, like +me, want to know which packages support inode/directory, you can get a +list like this:

+ +

+% appstreamcli what-provides mimetype inode/directory | grep Package: | sort
+Package: anjuta
+Package: audacious
+Package: baobab
+Package: cervisia
+Package: chirp
+Package: dolphin
+Package: doublecmd-common
+Package: easytag
+Package: enlightenment
+Package: ephoto
+Package: filelight
+Package: gwenview
+Package: k4dirstat
+Package: kaffeine
+Package: kdesvn
+Package: kid3
+Package: kid3-qt
+Package: nautilus
+Package: nemo
+Package: pcmanfm
+Package: pcmanfm-qt
+Package: qweborf
+Package: ranger
+Package: sirikali
+Package: spacefm
+Package: spacefm
+Package: vifm
+%
+

+ +

Using the same method, I can quickly discover that the Sketchup file +format is not yet supported by any package in Debian:

-vlc https://archive.org/download/LoveNest/LoveNest_archive.torrent
+% appstreamcli what-provides mimetype  application/vnd.sketchup.skp
+Could not find component providing 'mimetype::application/vnd.sketchup.skp'.
+%

-

The plugin is supposed to handle magnet links too, but since The -Internet Archive do not have magnet links and I did not want to spend -time tracking down another source, I have not tested it. It can take -quite a while before the video start playing without any indication of -what is going on from VLC. It took 10-20 seconds when I measured it. -Some times the plugin seem unable to find the correct video file to -play, and show the metadata XML file name in the VLC status line. I -have no idea why.

- -

I have created a request for -a new package in Debian (RFP) and -asked if -the upstream author is willing to help make this happen. Now we -wait to see what come out of this. I do not want to maintain a -package that is not maintained upstream, nor do I really have time to -maintain more packages myself, so I might leave it at this. But I -really hope someone step up to do the packaging, and hope upstream is -still maintaining the source. If you want to help, please update the -RFP request or the upstream issue.

- -

I have not found any traces of webtorrent support for VLC.

+

Yesterday I used it to figure out which packages support the STL 3D +format:

+ +

+% appstreamcli what-provides mimetype  application/sla|grep Package
+Package: cura
+Package: meshlab
+Package: printrun
+%
+

+ +

PS: A new version of Cura was uploaded to Debian yesterday.

As usual, if you use Bitcoin and want to show your support of my activities, please send Bitcoin donations to my address @@ -417,7 +598,7 @@ activities, please send Bitcoin donations to my address

- Tags: english, verkidetfri, video. + Tags: debian, english, isenkram.
@@ -425,23 +606,74 @@ activities, please send Bitcoin donations to my address
-
Version 3.1 of Cura, the 3D print slicer, is now in Debian
-
13th February 2018
-

A new version of the -3D printer slicer -software Cura, version 3.1.0, is now available in Debian Testing -(aka Buster) and Debian Unstable (aka Sid). I hope you find it -useful. It was uploaded the last few days, and the last update will -enter testing tomorrow. See the -release -notes for the list of bug fixes and new features. Version 3.2 -was announced 6 days ago. We will try to get it into Debian as -well.

- -

More information related to 3D printing is available on the -3D printing and -3D printer wiki pages -in Debian.

+
Debian APT upgrade without enough free space on the disk...
+
8th July 2018
+

Quite regularly, I let my Debian Sid/Unstable chroot stay untouch +for a while, and when I need to update it there is not enough free +space on the disk for apt to do a normal 'apt upgrade'. I normally +would resolve the issue by doing 'apt install <somepackages>' to +upgrade only some of the packages in one batch, until the amount of +packages to download fall below the amount of free space available. +Today, I had about 500 packages to upgrade, and after a while I got +tired of trying to install chunks of packages manually. I concluded +that I did not have the spare hours required to complete the task, and +decided to see if I could automate it. I came up with this small +script which I call 'apt-in-chunks':

+ +

+#!/bin/sh
+#
+# Upgrade packages when the disk is too full to upgrade every
+# upgradable package in one lump.  Fetching packages to upgrade using
+# apt, and then installing using dpkg, to avoid changing the package
+# flag for manual/automatic.
+
+set -e
+
+ignore() {
+    if [ "$1" ]; then
+	grep -v "$1"
+    else
+	cat
+    fi
+}
+
+for p in $(apt list --upgradable | ignore "$@" |cut -d/ -f1 | grep -v '^Listing...'); do
+    echo "Upgrading $p"
+    apt clean
+    apt install --download-only -y $p
+    for f in /var/cache/apt/archives/*.deb; do
+	if [ -e "$f" ]; then
+	    dpkg -i /var/cache/apt/archives/*.deb
+	    break
+	fi
+    done
+done
+

+ +

The script will extract the list of packages to upgrade, try to +download the packages needed to upgrade one package, install the +downloaded packages using dpkg. The idea is to upgrade packages +without changing the APT mark for the package (ie the one recording of +the package was manually requested or pulled in as a dependency). To +use it, simply run it as root from the command line. If it fail, try +'apt install -f' to clean up the mess and run the script again. This +might happen if the new packages conflict with one of the old +packages. dpkg is unable to remove, while apt can do this.

+ +

It take one option, a package to ignore in the list of packages to +upgrade. The option to ignore a package is there to be able to skip +the packages that are simply too large to unpack. Today this was +'ghc', but I have run into other large packages causing similar +problems earlier (like TeX).

+ +

Update 2018-07-08: Thanks to Paul Wise, I am aware of two +alternative ways to handle this. The "unattended-upgrades +--minimal-upgrade-steps" option will try to calculate upgrade sets for +each package to upgrade, and then upgrade them in order, smallest set +first. It might be a better option than my above mentioned script. +Also, "aptutude upgrade" can upgrade single packages, thus avoiding +the need for using "dpkg -i" in the script above.

As usual, if you use Bitcoin and want to show your support of my activities, please send Bitcoin donations to my address @@ -450,7 +682,7 @@ activities, please send Bitcoin donations to my address

- Tags: 3d-printer, debian, english. + Tags: debian, english.
@@ -458,116 +690,32 @@ activities, please send Bitcoin donations to my address
-
Overvåkning i Kina vs. Norge
-
12th February 2018
-

Jeg lar meg fascinere av en artikkel -i -Dagbladet om Kinas håndtering av Xinjiang, spesielt følgende -utsnitt:

- -

- -

«I den sørvestlige byen Kashgar nærmere grensa til -Sentral-Asia meldes det nå at 120.000 uigurer er internert i såkalte -omskoleringsleirer. Samtidig er det innført et omfattende -helsesjekk-program med innsamling og lagring av DNA-prøver fra -absolutt alle innbyggerne. De mest avanserte overvåkingsmetodene -testes ut her. Programmer for å gjenkjenne ansikter og stemmer er på -plass i regionen. Der har de lokale myndighetene begynt å installere -GPS-systemer i alle kjøretøy og egne sporingsapper i -mobiltelefoner.

- -

Politimetodene griper så dypt inn i folks dagligliv at motstanden -mot Beijing-regimet øker.»

- -

- -

Beskrivelsen avviker jo desverre ikke så veldig mye fra tilstanden -her i Norge.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
DataregistreringKinaNorge
Innsamling og lagring av DNA-prøver fra befolkningenJaDelvis, planlagt for alle nyfødte.
AnsiktsgjenkjenningJaJa
StemmegjenkjenningJaNei
Posisjons-sporing av mobiltelefonerJaJa
Posisjons-sporing av bilerJaJa
- -

I Norge har jo situasjonen rundt Folkehelseinstituttets lagring av -DNA-informasjon på vegne av politiet, der de nektet å slette -informasjon politiet ikke hadde lov til å ta vare på, gjort det klart -at DNA tar vare på ganske lenge. I tillegg finnes det utallige -biobanker som lagres til evig tid, og det er planer om å innføre -evig -lagring av DNA-materiale fra alle spebarn som fødes (med mulighet -for å be om sletting).

- -

I Norge er det system på plass for ansiktsgjenkjenning, som -en -NRK-artikkel fra 2015 forteller er aktiv på Gardermoen, samt -brukes -til å analysere bilder innsamlet av myndighetene. Brukes det også -flere plasser? Det er tett med overvåkningskamera kontrollert av -politi og andre myndigheter i for eksempel Oslo sentrum.

- -

Jeg er ikke kjent med at Norge har noe system for identifisering av -personer ved hjelp av stemmegjenkjenning.

- -

Posisjons-sporing av mobiltelefoner er ruinemessig tilgjengelig for -blant annet politi, NAV og Finanstilsynet, i tråd med krav i -telefonselskapenes konsesjon. I tillegg rapporterer smarttelefoner -sin posisjon til utviklerne av utallige mobil-apper, der myndigheter -og andre kan hente ut informasjon ved behov. Det er intet behov for -noen egen app for dette.

- -

Posisjons-sporing av biler er rutinemessig tilgjengelig via et tett -nett av målepunkter på veiene (automatiske bomstasjoner, -køfribrikke-registrering, automatiske fartsmålere og andre veikamera). -Det er i tillegg vedtatt at alle nye biler skal selges med utstyr for -GPS-sporing (eCall).

- -

Det er jammen godt vi lever i et liberalt demokrati, og ikke en -overvåkningsstat, eller?

- -

Som vanlig, hvis du bruker Bitcoin og ønsker å vise din støtte til -det jeg driver med, setter jeg pris på om du sender Bitcoin-donasjoner -til min adresse +

The worlds only stone power plant?
+
30th June 2018
+

So far, at least hydro-electric power, coal power, wind power, +solar power, and wood power are well known. Until a few days ago, I +had never heard of stone power. Then I learn about a quarry in a +mountain in +Bremanger i +Norway, where +the +Bremanger Quarry company is extracting stone and dumping the stone +into a shaft leading to its shipping harbour. This downward movement +in this shaft is used to produce electricity. In short, it is using +falling rocks instead of falling water to produce electricity, and +according to its own statements it is producing more power than it is +using, and selling the surplus electricity to the Norwegian power +grid. I find the concept truly amazing. Is this the worlds only +stone power plant?

+ +

As usual, if you use Bitcoin and want to show your support of my +activities, please send Bitcoin donations to my address 15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b.

- Tags: norsk, surveillance. + Tags: english.
@@ -575,22 +723,57 @@ til min adresse
-
How hard can æ, ø and å be?
-
11th February 2018
-
- -

We write 2018, and it is 30 years since Unicode was introduced. -Most of us in Norway have come to expect the use of our alphabet to -just work with any computer system. But it is apparently beyond reach -of the computers printing recites at a restaurant. Recently I visited -a Peppes pizza resturant, and noticed a few details on the recite. -Notice how 'ø' and 'å' are replaced with strange symbols in -'Servitør', 'Å BETALE', 'Beløp pr. gjest', 'Takk for besøket.' and 'Vi -gleder oss til å se deg igjen'.

- -

I would say that this state is passed sad and over in embarrassing.

- -

I removed personal and private information to be nice.

+
Add-on to control the projector from within Kodi
+
26th June 2018
+

My movie playing setup involve Kodi, +OpenELEC (probably soon to be +replaced with LibreELEC) and an +Infocus IN76 video projector. My projector can be controlled via both +a infrared remote controller, and a RS-232 serial line. The vendor of +my projector, InFocus, had been +sensible enough to document the serial protocol in its user manual, so +it is easily available, and I used it some years ago to write +a +small script to control the projector. For a while now, I longed +for a setup where the projector was controlled by Kodi, for example in +such a way that when the screen saver went on, the projector was +turned off, and when the screen saver exited, the projector was turned +on again.

+ +

A few days ago, with very good help from parts of my family, I +managed to find a Kodi Add-on for controlling a Epson projector, and +got in touch with its author to see if we could join forces and make a +Add-on with support for several projectors. To my pleasure, he was +positive to the idea, and we set out to add InFocus support to his +add-on, and make the add-on suitable for the official Kodi add-on +repository.

+ +

The Add-on is now working (for me, at least), with a few minor +adjustments. The most important change I do relative to the master +branch in the github repository is embedding the +pyserial module in +the add-on. The long term solution is to make a "script" type +pyserial module for Kodi, that can be pulled in as a dependency in +Kodi. But until that in place, I embed it.

+ +

The add-on can be configured to turn on the projector when Kodi +starts, off when Kodi stops as well as turn the projector off when the +screensaver start and on when the screesaver stops. It can also be +told to set the projector source when turning on the projector. + +

If this sound interesting to you, check out +the +project github repository. Perhaps you can send patches to +support your projector too? As soon as we find time to wrap up the +latest changes, it should be available for easy installation using any +Kodi instance.

+ +

For future improvements, I would like to add projector model +detection and the ability to adjust the brightness level of the +projector from within Kodi. We also need to figure out how to handle +the cooling period of the projector. My projector refuses to turn on +for 60 seconds after it was turned off. This is not handled well by +the add-on at the moment.

As usual, if you use Bitcoin and want to show your support of my activities, please send Bitcoin donations to my address @@ -599,7 +782,7 @@ activities, please send Bitcoin donations to my address

- Tags: english. + Tags: english, multimedia, video.
@@ -623,6 +806,14 @@ activities, please send Bitcoin donations to my address
  • March (5)
    • +
  • April (3)
    • + +
  • June (2)
    • + +
  • July (5)
    • + +
  • August (3)
    • +
  • 2017 @@ -916,7 +1107,7 @@ activities, please send Bitcoin donations to my address
  • chrpath (2)
    • -
  • debian (156)
    • +
  • debian (161)
  • debian edu (158)
    • @@ -930,7 +1121,7 @@ activities, please send Bitcoin donations to my address
  • drivstoffpriser (4)
    • -
  • english (372)
    • +
  • english (382)
  • fiksgatami (23)
    • @@ -946,7 +1137,7 @@ activities, please send Bitcoin donations to my address
  • intervju (42)
    • -
  • isenkram (15)
    • +
  • isenkram (16)
  • kart (20)
    • @@ -962,11 +1153,11 @@ activities, please send Bitcoin donations to my address
  • mesh network (8)
    • -
  • multimedia (39)
    • +
  • multimedia (41)
    • -
  • nice free software (9)
    • +
  • nice free software (10)
    • -
  • norsk (296)
    • +
  • norsk (299)
  • nuug (190)
    • @@ -974,9 +1165,9 @@ activities, please send Bitcoin donations to my address
  • open311 (2)
    • -
  • opphavsrett (71)
    • +
  • opphavsrett (72)
    • -
  • personvern (106)
    • +
  • personvern (107)
  • raid (2)
    • @@ -994,7 +1185,7 @@ activities, please send Bitcoin donations to my address
  • scraperwiki (2)
    • -
  • sikkerhet (53)
    • +
  • sikkerhet (54)
  • sitesummary (4)
    • @@ -1006,7 +1197,7 @@ activities, please send Bitcoin donations to my address
  • stortinget (12)
    • -
  • surveillance (54)
    • +
  • surveillance (55)
  • sysadmin (4)
    • @@ -1016,11 +1207,11 @@ activities, please send Bitcoin donations to my address
  • verkidetfri (11)
    • -
  • video (62)
    • +
  • video (66)
  • vitenskap (4)
    • -
  • web (40)
    • +
  • web (41)