Jeg lot meg fascinere av -en -artikkel i Aftenposten der det fortelles at «over 600 telefoner som -benyttes av stortingsrepresentanter, rådgivere og ansatte på -Stortinget, kan «fjernstyres» ved hjelp av -programvaren -Airwatch, et såkalte MDM-program (Mobile Device Managment)». Det -hele bagatelliseres av Stortingets IT-stab, men det er i hovedsak på -grunn av at journalisten ikke stiller de relevante spørsmålene. For -meg er det relevante spørsmålet hvem som har lovlig tilgang (i henhold -til lokal lovgiving, dvs. i hvert fall i Norge, Sverige, UK og USA) -til informasjon om og på telefonene, og hvor enkelt det er å skaffe -seg tilgang til hvor mobilene befinner seg og informasjon som befinner -seg på telefonene ved hjelp av utro tjenere, trusler, innbrudd og -andre ulovlige metoder.
- -Bruken av AirWatch betyr i realiteten at USAs etteretning og -politimyndigheter har full tilgang til stortingets mobiltelefoner, -inkludert posisjon og innhold, takket være -FISAAA-loven -og -"National -Security Letters" og det enkle faktum at AirWatch er kontrollert -av et selskap i USA. I tillegg er det kjent at kan flere lands -etterretningstjenester kan lytte på trafikken når den passerer -landegrensene.
- -Jeg har bedt om mer informasjon -fra -Stortinget om bruken av AirWatch via Mimes brønn så får vi se hva -de har å fortelle om saken. Fant ingenting om 'airwatch' i -postjournalen til Stortinget, så jeg trenger hjelp før jeg kan be om -innsyn i konkrete dokumenter.
+ +Making packages for Debian requires quite a lot of attention to +details. And one of the details is the content of the +debian/copyright file, which should list all relevant licenses used by +the code in the package in question, preferably in +machine +readable DEP5 format.
+ +For large packages with lots of contributors it is hard to write +and update this file manually, and if you get some detail wrong, the +package is normally rejected by the ftpmasters. So getting it right +the first time around get the package into Debian faster, and save +both you and the ftpmasters some work.. Today, while trying to figure +out what was wrong with +the +zfsonlinux copyright file, I decided to spend some time on +figuring out the options for doing this job automatically, or at least +semi-automatically.
+ +Lucikly, there are at least two tools available for generating the +file based on the code in the source package, +debmake +and cme. I'm +not sure which one of them came first, but both seem to be able to +create a sensible draft file. As far as I can tell, none of them can +be trusted to get the result just right, so the content need to be +polished a bit before the file is OK to upload. I found the debmake +option in +a +blog posts from 2014. + +
To generate using debmake, use the -cc option: + +
+debmake -cc > debian/copyright ++ +
Note there are some problems with python and non-ASCII names, so +this might not be the best option.
+ +The cme option is based on a config parsing library, and I found +this approach in +a +blog post from 2015. To generate using cme, use the 'update +dpkg-copyright' option: + +
+cme update dpkg-copyright -quiet ++ +
This will create or update debian/copyright. The cme tool seem to +handle UTF-8 names better than debmake.
+ +When the copyright file is created, I would also like some help to +check if the file is correct. For this I found two good options, +debmake -k and license-reconcile. The former seem +to focus on license types and file matching, and is able to detect +ineffective blocks in the copyright file. The latter reports missing +copyright holders and years, but was confused by inconsistent license +names (like CDDL vs. CDDL-1.0). I suspect it is good to use both and +fix all issues reported by them before uploading. But I do not know +if the tools and the ftpmasters agree on what is important to fix in a +copyright file, so the package might still be rejected.
+ +The devscripts tool licensecheck deserve mentioning. It +will read through the source and try to find all copyright statements. +It is not comparing the result to the content of debian/copyright, but +can be useful when verifying the content of the copyright file.
+ +Are you aware of better tools in Debian to create and update +debian/copyright file. Please let me know, or blog about it on +planet.debian.org.
+ +As usual, if you use Bitcoin and want to show your support of my +activities, please send Bitcoin donations to my address +15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b.
As I wrap up the Norwegian version of -Free -Culture book by Lawrence Lessig (still waiting for my final proof -reading copy to arrive in the mail), my great -dblatex helper and -developer of the dblatex docbook processor, Benoît Guillon, decided a -to try to create a French version of the book. He started with the -French translation available from the -Wikilivres wiki -pages, and wrote a program to convert it into a PO file, allowing -the translation to be integrated into the po4a based framework I use -to create the Norwegian translation from the English edition. We meet -on the #dblatex IRC -channel to discuss the work. If you want to help create a French -edition, check out -his git -repository and join us on IRC. If the French edition look good, -we might publish it as a paper book on lulu.com. A French version of -the drawings and the cover need to be provided for this to happen.
+ +The appstream system +is taking shape in Debian, and one provided feature is a very +convenient way to tell you which package to install to make a given +firmware file available when the kernel is looking for it. This can +be done using apt-file too, but that is for someone else to blog +about. :)
+ +Here is a small recipe to find the package with a given firmware +file, in this example I am looking for ctfw-3.2.3.0.bin, randomly +picked from the set of firmware announced using appstream in Debian +unstable. In general you would be looking for the firmware requested +by the kernel during kernel module loading. To find the package +providing the example file, do like this:
+ ++ ++% apt install appstream +[...] +% apt update +[...] +% appstreamcli what-provides firmware:runtime ctfw-3.2.3.0.bin | \ + awk '/Package:/ {print $2}' +firmware-qlogic +% +
See the +appstream wiki page to learn how to embed the package metadata in +a way appstream can use.
+ +This same approach can be used to find any package supporting a +given MIME type. This is very useful when you get a file you do not +know how to handle. First find the mime type using file +--mime-type, and next look up the package providing support for +it. Lets say you got an SVG file. Its MIME type is image/svg+xml, +and you can find all packages handling this type like this:
+ ++ ++% apt install appstream +[...] +% apt update +[...] +% appstreamcli what-provides mimetype image/svg+xml | \ + awk '/Package:/ {print $2}' +bkchem +phototonic +inkscape +shutter +tetzle +geeqie +xia +pinta +gthumb +karbon +comix +mirage +viewnior +postr +ristretto +kolourpaint4 +eog +eom +gimagereader +midori +% +
I believe the MIME types are fetched from the desktop file for +packages providing appstream metadata.
When I get a new laptop, the battery life time at the start is OK. -But this do not last. The last few laptops gave me a feeling that -within a year, the life time is just a fraction of what it used to be, -and it slowly become painful to use the laptop without power connected -all the time. Because of this, when I got a new Thinkpad X230 laptop -about two years ago, I decided to monitor its battery state to have -more hard facts when the battery started to fail.
- -
First I tried to find a sensible Debian package to record the -battery status, assuming that this must be a problem already handled -by someone else. I found -battery-stats, -which collects statistics from the battery, but it was completely -broken. I sent a few suggestions to the maintainer, but decided to -write my own collector as a shell script while I waited for feedback -from him. Via -a -blog post about the battery development on a MacBook Air I also -discovered -batlog, not -available in Debian.
- -I started my collector 2013-07-15, and it has been collecting -battery stats ever since. Now my -/var/log/hjemmenett-battery-status.log file contain around 115,000 -measurements, from the time the battery was working great until now, -when it is unable to charge above 7% of original capacity. My -collector shell script is quite simple and look like this:
- --#!/bin/sh -# Inspired by -# http://www.ifweassume.com/2013/08/the-de-evolution-of-my-laptop-battery.html -# See also -# http://blog.sleeplessbeastie.eu/2013/01/02/debian-how-to-monitor-battery-capacity/ -logfile=/var/log/hjemmenett-battery-status.log - -files="manufacturer model_name technology serial_number \ - energy_full energy_full_design energy_now cycle_count status" - -if [ ! -e "$logfile" ] ; then - ( - printf "timestamp," - for f in $files; do - printf "%s," $f - done - echo - ) > "$logfile" -fi - -log_battery() { - # Print complete message in one echo call, to avoid race condition - # when several log processes run in parallel. - msg=$(printf "%s," $(date +%s); \ - for f in $files; do \ - printf "%s," $(cat $f); \ - done) - echo "$msg" -} - -cd /sys/class/power_supply - -for bat in BAT*; do - (cd $bat && log_battery >> "$logfile") -done -- -
The script is called when the power management system detect a -change in the power status (power plug in or out), and when going into -and out of hibernation and suspend. In addition, it collect a value -every 10 minutes. This make it possible for me know when the battery -is discharging, charging and how the maximum charge change over time. -The code for the Debian package -is now -available on github.
- -The collected log file look like this:
- --timestamp,manufacturer,model_name,technology,serial_number,energy_full,energy_full_design,energy_now,cycle_count,status, -1376591133,LGC,45N1025,Li-ion,974,62800000,62160000,39050000,0,Discharging, -[...] -1443090528,LGC,45N1025,Li-ion,974,4900000,62160000,4900000,0,Full, -1443090601,LGC,45N1025,Li-ion,974,4900000,62160000,4900000,0,Full, -- -
I wrote a small script to create a graph of the charge development -over time. This graph depicted above show the slow death of my laptop -battery.
- -But why is this happening? Why are my laptop batteries always -dying in a year or two, while the batteries of space probes and -satellites keep working year after year. If we are to believe -Battery -University, the cause is me charging the battery whenever I have a -chance, and the fix is to not charge the Lithium-ion batteries to 100% -all the time, but to stay below 90% of full charge most of the time. -I've been told that the Tesla electric cars -limit -the charge of their batteries to 80%, with the option to charge to -100% when preparing for a longer trip (not that I would want a car -like Tesla where rights to privacy is abandoned, but that is another -story), which I guess is the option we should have for laptops on -Linux too.
- -Is there a good and generic way with Linux to tell the battery to -stop charging at 80%, unless requested to charge to 100% once in -preparation for a longer trip? I found -one -recipe on askubuntu for Ubuntu to limit charging on Thinkpad to -80%, but could not get it to work (kernel module refused to -load).
- -I wonder why the battery capacity was reported to be more than 100% -at the start. I also wonder why the "full capacity" increases some -times, and if it is possible to repeat the process to get the battery -back to design capacity. And I wonder if the discharge and charge -speed change over time, or if this stay the same. I did not yet try -to write a tool to calculate the derivative values of the battery -level, but suspect some interesting insights might be learned from -those.
- -Update 2015-09-24: I got a tip to install the packages -acpi-call-dkms and tlp (unfortunately missing in Debian stable) -packages instead of the tp-smapi-dkms package I had tried to use -initially, and use 'tlp setcharge 40 80' to change when charging start -and stop. I've done so now, but expect my existing battery is toast -and need to be replaced. The proposal is unfortunately Thinkpad -specific.
+ +Most people seem not to realise that every time they walk around +with the computerised radio beacon known as a mobile phone their +position is tracked by the phone company and often stored for a long +time (like every time a SMS is received or sent). And if their +computerised radio beacon is capable of running programs (often called +mobile apps) downloaded from the Internet, these programs are often +also capable of tracking their location (if the app requested access +during installation). And when these programs send out information to +central collection points, the location is often included, unless +extra care is taken to not send the location. The provided +information is used by several entities, for good and bad (what is +good and bad, depend on your point of view). What is certain, is that +the private sphere and the right to free movement is challenged and +perhaps even eradicated for those announcing their location this way, +when they share their whereabouts with private and public +entities.
+ +The phone company logs provide a register of locations to check out +when one want to figure out what the tracked person was doing. It is +unavailable for most of us, but provided to selected government +officials, company staff, those illegally buying information from +unfaithful servants and crackers stealing the information. But the +public information can be collected and analysed, and a free software +tool to do so is called +Creepy or Cree.py. I +discovered it when I read +an +article about Creepy in the Norwegian newspaper Aftenposten i +November 2014, and decided to check if it was available in Debian. +The python program was in Debian, but +the version in +Debian was completely broken and practically unmaintained. I +uploaded a new version which did not work quite right, but did not +have time to fix it then. This Christmas I decided to finally try to +get Creepy operational in Debian. Now a fixed version is available in +Debian unstable and testing, and almost all Debian specific patches +are now included +upstream.
+ +The Creepy program visualises geolocation information fetched from +Twitter, Instagram, Flickr and Google+, and allow one to get a +complete picture of every social media message posted recently in a +given area, or track the movement of a given individual across all +these services. Earlier it was possible to use the search API of at +least some of these services without identifying oneself, but these +days it is impossible. This mean that to use Creepy, you need to +configure it to log in as yourself on these services, and provide +information to them about your search interests. This should be taken +into account when using Creepy, as it will also share information +about yourself with the services.
+ +The picture above show the twitter messages sent from (or at least +geotagged with a position from) the city centre of Oslo, the capital +of Norway. One useful way to use Creepy is to first look at +information tagged with an area of interest, and next look at all the +information provided by one or more individuals who was in the area. +I tested it by checking out which celebrity provide their location in +twitter messages by checkout out who sent twitter messages near a +Norwegian TV station, and next could track their position over time, +making it possible to locate their home and work place, among other +things. A similar technique have been +used +to locate Russian soldiers in Ukraine, and it is both a powerful +tool to discover lying governments, and a useful tool to help people +understand the value of the private information they provide to the +public.
+ +The package is not trivial to backport to Debian Stable/Jessie, as +it depend on several python modules currently missing in Jessie (at +least python-instagram, python-flickrapi and +python-requests-toolbelt).
+ +(I have uploaded +the image to +screenshots.debian.net and licensed it under the same terms as the +Creepy program in Debian.)
Creating a good looking book cover proved harder than I expected. -I wanted to create a cover looking similar to the original cover of -the -Free -Culture book we are translating to Norwegian, and I wanted it in -vector format for high resolution printing. But my inkscape knowledge -were not nearly good enough to pull that off. - -
But thanks to the great inkscape community, I was able to wrap up -the cover yesterday evening. I asked on the -#inkscape IRC channel -on Freenode for help and clues, and Marc Jeanmougin (Mc-) volunteered -to try to recreate it based on the PDF of the cover from the HTML -version. Not only did he create a -SVG document with -the original and his vector version side by side, he even provided -an instruction -video explaining how he did it. But the instruction video is -not easy to follow for an untrained inkscape user. The video is a -recording on how he did it, and he is obviously very experienced as -the menu selections are very quick and he mentioned on IRC that he did -use some keyboard shortcuts that can't be seen on the video, but it -give a good idea about the inkscape operations to use to create the -stripes with the embossed copyright sign in the center.
- -I took his SVG file, copied the vector image and re-sized it to fit -on the cover I was drawing. I am happy with the end result, and the -current english version look like this:
- -
I am not quite sure about the text on the back, but guess it will -do. I picked three quotes from the official site for the book, and -hope it will work to trigger the interest of potential readers. The -Norwegian cover will look the same, but with the texts and bar code -replaced with the Norwegian version.
- -The book is very close to being ready for publication, and I expect -to upload the final draft to Lulu in the next few days and order a -final proof reading copy to verify that everything look like it should -before allowing everyone to order their own copy of Free Culture, in -English or Norwegian Bokmål. I'm waiting to give the the productive -proof readers a chance to complete their work.
+ +During his DebConf15 keynote, Jacob Appelbaum +observed +that those listening on the Internet lines would have good reason to +believe a computer have a given security hole if it download a +security fix from a Debian mirror. This is a good reason to always +use encrypted connections to the Debian mirror, to make sure those +listening do not know which IP address to attack. In August, Richard +Hartmann observed that encryption was not enough, when it was possible +to interfere download size to security patches or the fact that +download took place shortly after a security fix was released, and +proposed +to always use Tor to download packages from the Debian mirror. He +was not the first to propose this, as the +apt-transport-tor +package by Tim Retout already existed to make it easy to convince apt +to use Tor, but I was not +aware of that package when I read the blog post from Richard.
+ +Richard discussed the idea with Peter Palfrader, one of the Debian +sysadmins, and he set up a Tor hidden service on one of the central +Debian mirrors using the address vwakviie2ienjx6t.onion, thus making +it possible to download packages directly between two tor nodes, +making sure the network traffic always were encrypted.
+ +Here is a short recipe for enabling this on your machine, by +installing apt-transport-tor and replacing http and https +urls with tor+http and tor+https, and using the hidden service instead +of the official Debian mirror site. I recommend installing +etckeeper before you start to have a history of the changes +done in /etc/.
+ ++ ++apt install apt-transport-tor +sed -i 's% http://ftp.debian.org/%tor+http://vwakviie2ienjx6t.onion/%' /etc/apt/sources.list +sed -i 's% http% tor+http%' /etc/apt/sources.list +
If you have more sources listed in /etc/apt/sources.list.d/, run +the sed commands for these too. The sed command is assuming your are +using the ftp.debian.org Debian mirror. Adjust the command (or just +edit the file manually) to match your mirror.
+ +This work in Debian Jessie and later. Note that tools like +apt-file only recently started using the apt transport +system, and do not work with these tor+http URLs. For +apt-file you need the version currently in experimental, +which need a recent apt version currently only in unstable. So if you +need a working apt-file, this is not for you.
+ +Another advantage from this change is that your machine will start +using Tor regularly and at fairly random intervals (every time you +update the package lists or upgrade or install a new package), thus +masking other Tor traffic done from the same machine. Using Tor will +become normal for the machine in question.
+ +On Freedombox, APT +is set up by default to use apt-transport-tor when Tor is +enabled. It would be great if it was the default on any Debian +system.
Today, finally, my first printed draft edition of the Norwegian -translation of Free Culture I have been working on for the last few -years arrived in the mail. I had to fake a cover to get the interior -printed, and the exterior of the book look awful, but that is -irrelevant at this point. I asked for a printed pocket book version -to get an idea about the font sizes and paper format as well as how -good the figures and images look in print, but also to test what the -pocket book version would look like. After receiving the 500 page -pocket book, it became obvious to me that that pocket book size is too -small for this book. I believe the book is too thick, and several -tables and figures do not look good in the size they get with that -small page sizes. I believe I will go with the 5.5x8.5 inch size -instead. A surprise discovery from the paper version was how bad the -URLs look in print. They are very hard to read in the colophon page. -The URLs are red in the PDF, but light gray on paper. I need to -change the color of links somehow to look better. But there is a -printed book in my hand, and it feels great. :)
- -Now I only need to fix the cover, wrap up the postscript with the -store behind the book, and collect the last corrections from the proof -readers before the book is ready for proper printing. Cover artists -willing to work for free and create a Creative Commons licensed vector -file looking similar to the original is most welcome, as my skills as -a graphics designer are mostly missing.
+ +Det kommer stadig nye løsninger for å ta lagre unna innslag fra NRK +for å se på det senere. For en stund tilbake kom jeg over et script +nrkopptak laget av Ingvar Hagelund. Han fjernet riktignok sitt script +etter forespørsel fra Erik Bolstad i NRK, men noen tok heldigvis og +gjorde det tilgjengelig +via github.
+ +Scriptet kan lagre som MPEG4 eller Matroska, og bake inn +undertekster i fila på et vis som blant annet VLC forstår. For å +bruke scriptet, kopier ned git-arkivet og kjør
+ ++nrkopptak/bin/nrk-opptak k+ +https://tv.nrk.no/serie/bmi-turne/MUHH45000115/sesong-1/episode-1 +
URL-eksemplet er dagens toppsak på tv.nrk.no. Argument 'k' ber +scriptet laste ned og lagre som Matroska. Det finnes en rekke andre +muligheter for valg av kvalitet og format.
+ +Jeg foretrekker dette scriptet fremfor youtube-dl, som + +nevnt i 2014 støtter NRK og en rekke andre videokilder, på grunn +av at nrkopptak samler undertekster og video i en enkelt fil, hvilket +gjør håndtering enklere på disk.
Typesetting a book is harder than I hoped. As the translation is -mostly done, and a volunteer proof reader was going to check the text -on paper, it was time this summer to focus on formatting my translated -docbook based version of the -Free Culture book by Lawrence -Lessig. I've been trying to get both docboox-xsl+fop and dblatex to -give me a good looking PDF, but in the end I went with dblatex, because -its Debian maintainer and upstream developer were responsive and very -helpful in solving my formatting challenges.
- -Last night, I finally managed to create a PDF that no longer made -Lulu.com complain after uploading, -and I ordered a text version of the book on paper. It is lacking a -proper book cover and is not tagged with the correct ISBN number, but -should give me an idea what the finished book will look like.
- -Instead of using Lulu, I did consider printing the book using -CreateSpace, but ended up -using Lulu because it had smaller book size options (CreateSpace seem -to lack pocket book with extended distribution). I looked for a -similar service in Norway, but have not seen anything so far. Please -let me know if I am missing out on something here.
- -But I still struggle to decide the book size. Should I go for -pocket book (4.25x6.875 inches / 10.8x17.5 cm) with 556 pages, Digest -(5.5x8.5 inches / 14x21.6 cm) with 323 pages or US Trade (6x8 inches / -15.3x22.9 cm) with 280 pages? Fewer pager give a cheaper book, and a -smaller book is easier to carry around. The test book I ordered was -pocket book sized, to give me an idea how well that fit in my hand, -but I suspect I will end up using a digest sized book in the end to -bring the prize down further.
- -My biggest challenge at the moment is making nice cover art. My -inkscape skills are not yet up to the task of replicating the original -cover in SVG format. I also need to figure out what to write about -the book on the back (will most likely use the same text as the -description on web based book stores). I would love help with this, -if you are willing to license the art source and final version using -the same CC license as the book. My artistic skills are not really up -to the task.
- -I plan to publish the book in both English and Norwegian and on -paper, in PDF form as well as EPUB and MOBI format. The current -status can as usual be found on -github -in the archive/ directory. So far I have spent all time on making the -PDF version look good. Someone should probably do the same with the -dbtoepub generated e-book. Help is definitely needed here, as I -expect to run out of steem before I find time to improve the epub -formatting.
- -Please let me know via github if you find typos in the book or -discover translations that should be improved. The final proof -reading is being done right now, and I expect to publish the finished -result in a few months.
+ +When I was a kid, we used to collect "car numbers", as we used to +call the car license plate numbers in those days. I would write the +numbers down in my little book and compare notes with the other kids +to see how many region codes we had seen and if we had seen some +exotic or special region codes and numbers. It was a fun game to pass +time, as we kids have plenty of it.
+ +A few days I came across +the OpenALPR +project, a free software project to automatically discover and +report license plates in images and video streams, and provide the +"car numbers" in a machine readable format. I've been looking for +such system for a while now, because I believe it is a bad idea that the +automatic +number plate recognition tool only is available in the hands of +the powerful, and want it to be available also for the powerless to +even the score when it comes to surveillance and sousveillance. I +discovered the developer +wanted to get the tool into +Debian, and as I too wanted it to be in Debian, I volunteered to +help him get it into shape to get the package uploaded into the Debian +archive.
+ +Today we finally managed to get the package into shape and uploaded +it into Debian, where it currently +waits +in the NEW queue for review by the Debian ftpmasters.
+ +I guess you are wondering why on earth such tool would be useful +for the common folks, ie those not running a large government +surveillance system? Well, I plan to put it in a computer on my bike +and in my car, tracking the cars nearby and allowing me to be notified +when number plates on my watch list are discovered. Another use case +was suggested by a friend of mine, who wanted to set it up at his home +to open the car port automatically when it discovered the plate on his +car. When I mentioned it perhaps was a bit foolhardy to allow anyone +capable of placing his license plate number of a piece of cardboard to +open his car port, men replied that it was always unlocked anyway. I +guess for such use case it make sense. I am sure there are other use +cases too, for those with imagination and a vision.
+ +If you want to build your own version of the Debian package, check +out the upstream git source and symlink ./distros/debian to ./debian/ +before running "debuild" to build the source. Or wait a bit until the +package show up in unstable.
I'm still working on the Norwegian version of the -Free Culture book by Lawrence -Lessig, and is now working on the final typesetting and layout. -One of the features I want to get the structure similar to the -original book is to typeset the footnotes as endnotes in the notes -chapter. Based on the -feedback from the Debian -maintainer and the dblatex developer, I came up with this recipe I -would like to share with you. The proposal was to create a new LaTeX -class file and add the LaTeX code there, but this is not always -practical, when I want to be able to replace the class using a make -file variable. So my proposal misuses the latex.begindocument XSL -parameter value, to get a small fragment into the correct location in -the generated LaTeX File.
- -First, decide where in the DocBook document to place the endnotes, -and add this text there:
- --<?latex \theendnotes ?> -- -
Next, create a xsl stylesheet file dblatex-endnotes.xsl to add the -code needed to add the endnote instructions in the preamble of the -generated LaTeX document, with content like this:
- --<?xml version='1.0'?> -<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version='1.0'> - <xsl:param name="latex.begindocument"> - <xsl:text> -\usepackage{endnotes} -\let\footnote=\endnote -\def\enoteheading{\mbox{}\par\vskip-\baselineskip } -\begin{document} - </xsl:text> - </xsl:param> -</xsl:stylesheet> -- -
Finally, load this xsl file when running dblatex, for example like -this:
- --dblatex --xsl-user=dblatex-endnotes.xsl freeculture.nb.xml -- -
The end result can be seen on github, where -my -book project is located.
+ +Around three years ago, I created +the isenkram +system to get a more practical solution in Debian for handing +hardware related packages. A GUI system in the isenkram package will +present a pop-up dialog when some hardware dongle supported by +relevant packages in Debian is inserted into the machine. The same +lookup mechanism to detect packages is available as command line +tools in the isenkram-cli package. In addition to mapping hardware, +it will also map kernel firmware files to packages and make it easy to +install needed firmware packages automatically. The key for this +system to work is a good way to map hardware to packages, in other +words, allow packages to announce what hardware they will work +with.
+ +I started by providing data files in the isenkram source, and +adding code to download the latest version of these data files at run +time, to ensure every user had the most up to date mapping available. +I also added support for storing the mapping in the Packages file in +the apt repositories, but did not push this approach because while I +was trying to figure out how to best store hardware/package mappings, +the +appstream system was announced. I got in touch and suggested to +add the hardware mapping into that data set to be able to use +appstream as a data source, and this was accepted at least for the +Debian version of appstream.
+ +A few days ago using appstream in Debian for this became possible, +and today I uploaded a new version 0.20 of isenkram adding support for +appstream as a data source for mapping hardware to packages. The only +package so far using appstream to announce its hardware support is my +pymissile package. I got help from Matthias Klumpp with figuring out +how do add the required +metadata +in pymissile. I added a file debian/pymissile.metainfo.xml with +this content:
+ ++ ++<?xml version="1.0" encoding="UTF-8"?> +<component> + <id>pymissile</id> + <metadata_license>MIT</metadata_license> + <name>pymissile</name> + <summary>Control original Striker USB Missile Launcher</summary> + <description> + <p> + Pymissile provides a curses interface to control an original + Marks and Spencer / Striker USB Missile Launcher, as well as a + motion control script to allow a webcamera to control the + launcher. + </p> + </description> + <provides> + <modalias>usb:v1130p0202d*</modalias> + </provides> +</component> +
The key for isenkram is the component/provides/modalias value, +which is a glob style match rule for hardware specific strings +(modalias strings) provided by the Linux kernel. In this case, it +will map to all USB devices with vendor code 1130 and product code +0202.
+ +Note, it is important that the license of all the metadata files +are compatible to have permissions to aggregate them into archive wide +appstream files. Matthias suggested to use MIT or BSD licenses for +these files. A challenge is figuring out a good id for the data, as +it is supposed to be globally unique and shared across distributions +(in other words, best to coordinate with upstream what to use). But +it can be changed later or, so we went with the package name as +upstream for this project is dormant.
+ +To get the metadata file installed in the correct location for the +mirror update scripts to pick it up and include its content the +appstream data source, the file must be installed in the binary +package under /usr/share/appdata/. I did this by adding the following +line to debian/pymissile.install:
+ ++ ++debian/pymissile.metainfo.xml usr/share/appdata +
With that in place, the command line tool isenkram-lookup will list +all packages useful on the current computer automatically, and the GUI +pop-up handler will propose to install the package not already +installed if a hardware dongle is inserted into the machine in +question.
+ +Details of the modalias field in appstream is available from the +DEP-11 proposal.
+ +To locate the modalias values of all hardware present in a machine, +try running this command on the command line:
+ ++ ++cat $(find /sys/devices/|grep modalias) +
To learn more about the isenkram system, please check out +my +blog posts tagged isenkram.
I går fikk vi endelig lansert en norsk version av mySocietys -WhatDoTheyKnow. -Tjenesten heter Mimes brønn, og ble -annonsert -av NUUG via blogg, epost og twitter til NUUG-assosierte personer. -Det har tatt noen år, men de siste dagene fikk vi endelig tid til å få -på plass de siste bitene. Vi er to, Gorm og meg selv, som har vært -primus motor for det hele, men vi har fått hjelp med oversettelser og -oppsett fra mange flere. Jeg vil si tusen takk til hver og en av dem, -og er veldig fornøyd med at vi klarte å få tjenesten opp å kjøre før -ferietiden slo inn for fullt.
- -Vi er usikker på hvor mye belastning den virtuelle maskinen der -tjenesten kjører klarer, så vi har lansert litt i det stille og ikke -til for mange folk for å se hvordan maskinen klarer seg over sommeren, -før vi går mer aktivt ut og annonserer til høsten. Ta en titt, og se -om du kanskje har et spørsmål til det offentlige som er egnet å sende -inn via Mimes brønn.
- -Hvis du lurer på hva i alle dager en slik tjenestes kan brukes til, -anbefaler jeg deg å se -TED-foredraget til -Heather Brook om hvordan hun brukte WhatDoTheyKnow til å lære -hvordan offentlige midler ble misbrukt. Det er en inspirerende -historie.
+ +Besøk +lulu.com +eller +Amazon +for å kjøpe boken på papir, eller last ned ebook som +PDF, +ePub +eller +MOBI +fra +github.
+ +Jeg ble gledelig overrasket i dag da jeg oppdaget at boken jeg har +gitt ut +hadde +dukket opp i Amazon. Jeg hadde trodd det skulle ta lenger tid, da +jeg fikk beskjed om at det skulle ta seks til åtte uker. +Amazonoppføringen er et resultat av at jeg for noen uker siden +diskuterte prissetting og håndtering av profitt med forfatteren. Det +måtte avklares da bruksvilkårene til boken har krav om +ikke-kommersiell bruk. Vi ble enige om at overskuddet fra salg av +boken skal sendes til +Creative Commons-stiftelsen. +Med det på plass kunne jeg be +lulu.com +om å gi boken «utvidet» distribusjon. à rsaken til at +bokhandeldistribusjon var litt utfordrende er at bokhandlere krever +mulighet for profitt på bøkene de selger (selvfølgelig), og dermed +måtte de få lov til å selge til høyere pris enn lulu.com. I tillegg +er det krav om samme pris på lulu.com og i bokhandlene, dermed blir +prisen økt også hos lulu.com. Hva skulle jeg gjøre med den profitten +uten å bryte med klausulen om ikkekommersiell? Løsningen var å gi +bort profitten til CC-stiftelsen. Prisen på boken ble nesten +tredoblet, til $19.99 (ca. 160,-) pluss frakt, men synligheten øker +betraktelig når den kan finnes i katalogene til store nettbokhandlere. +Det betyr at hvis du allerede har kjøpt boken har du fått den veldig +billig, og kjøper du den nå, får du den fortsatt billig samt donerer i +tillegg noen tiere til fremme av Creative Commons.
+ +Mens jeg var i gang med å titte etter informasjon om boken +oppdaget jeg at den også var dukket opp på +Google +Books, der en kan lese den på web. PDF-utgaven har ennå ikke +dukket opp hos Nasjonalbiblioteket, +men det regner jeg med kommer på plass i løpet av noen uker. Boken er +heller ikke dukket opp hos +Barnes & Noble ennå, men +jeg antar det bare er et tidsspørsmål før dette er på plass.
+ +Boken er dessverre ikke tilgjengelig fra norske bokhandlere, og +kommer neppe til å bli det med det første. à rsaken er at for å få det +til måtte jeg personlig håndtere bestilling av bøker, hvilket jeg ikke +er interessert i å bruke tid på. Jeg kunne betalt ca 2000,- til +den norske bokbasen, en felles +database over bøker tilgjengelig for norske bokhandlere, for å få en +oppføring der, men da måtte jeg tatt imot bestillinger på epost og +sendt ut bøker selv. Det ville krevd at jeg var klar til å +sende ut bøker på kort varsel, dvs. holdt meg med ekstra bøker, +konvolutter og frimerker. Bokbasen har visst ikke opplegg for å be +bokhandlene bestille direkte via web, så jeg droppet oppføring der. +Jeg har spurt Haugen bok og Tronsmo direkte på epost om de er +interessert i å ta inn boken i sin bestillingskatalog, men ikke fått +svar, så jeg antar de ikke er interessert. Derimot har jeg fått en +hyggelig henvendelse fra Biblioteksentralen som fortalte at de har +lagt den inn i sin database slik at deres bibliotekskunder enkelt kan +bestille den via dem.
+ +Boken er i følge +Bibsys/Oria +og bokdatabasen til +Deichmanske +tilgjengelig fra flere biblioteker allerede, og alle eksemplarer er +visst allerede utlånt med ventetid. Det synes jeg er veldig gledelig +å se. Jeg håper mange kommer til å lese boken. Jeg tror den er +spesielt egnet for foreldre og bekjente av oss nerder for å forklare +hva slags problemer vi ser med dagens opphavsrettsregime.
After asking the Norwegian Broadcasting Company (NRK) -why -they can broadcast and stream H.264 video without an agreement with -the MPEG LA, I was wiser, but still confused. So I asked MPEG LA -if their understanding matched that of NRK. As far as I can tell, it -does not.
- -I started by asking for more information about the various -licensing classes and what exactly is covered by the "Internet -Broadcast AVC Video" class that NRK pointed me at to explain why NRK -did not need a license for streaming H.264 video: - -
- -- -According to -a -MPEG LA press release dated 2010-02-02, there is no charge when -using MPEG AVC/H.264 according to the terms of "Internet Broadcast AVC -Video". I am trying to understand exactly what the terms of "Internet -Broadcast AVC Video" is, and wondered if you could help me. What -exactly is covered by these terms, and what is not?
- -The only source of more information I have been able to find is a -PDF named -AVC -Patent Portfolio License Briefing, which states this about the -fees:
- --
- -- Where End User pays for AVC Video -
- --
- Subscription (not limited by title) â 100,000 or fewer - subscribers/yr = no royalty; > 100,000 to 250,000 subscribers/yr = - $25,000; >250,000 to 500,000 subscribers/yr = $50,000; >500,000 to - 1M subscribers/yr = $75,000; >1M subscribers/yr = $100,000
- -- Title-by-Title - 12 minutes or less = no royalty; >12 minutes in - length = lower of (a) 2% or (b) $0.02 per title
-- Where remuneration is from other sources -
--
- Free Television - (a) one-time $2,500 per transmission encoder or - (b) annual fee starting at $2,500 for > 100,000 HH rising to - maximum $10,000 for >1,000,000 HH
- -- Internet Broadcast AVC Video (not title-by-title, not subscription) - â no royalty for life of the AVC Patent Portfolio License
-Am I correct in assuming that the four categories listed is the -categories used when selecting licensing terms, and that "Internet -Broadcast AVC Video" is the category for things that do not fall into -one of the other three categories? Can you point me to a good source -explaining what is ment by "title-by-title" and "Free Television" in -the license terms for AVC/H.264?
- -Will a web service providing H.264 encoded video content in a -"video on demand" fashing similar to Youtube and Vimeo, where no -subscription is required and no payment is required from end users to -get access to the videos, fall under the terms of the "Internet -Broadcast AVC Video", ie no royalty for life of the AVC Patent -Portfolio license? Does it matter if some users are subscribed to get -access to personalized services?
- -Note, this request and all answers will be published on the -Internet.
-
The answer came quickly from Benjamin J. Myers, Licensing Associate -with the MPEG LA:
- --- -Thank you for your message and for your interest in MPEG LA. We -appreciate hearing from you and I will be happy to assist you.
- -As you are aware, MPEG LA offers our AVC Patent Portfolio License -which provides coverage under patents that are essential for use of -the AVC/H.264 Standard (MPEG-4 Part 10). Specifically, coverage is -provided for end products and video content that make use of AVC/H.264 -technology. Accordingly, the party offering such end products and -video to End Users concludes the AVC License and is responsible for -paying the applicable royalties.
- -Regarding Internet Broadcast AVC Video, the AVC License generally -defines such content to be video that is distributed to End Users over -the Internet free-of-charge. Therefore, if a party offers a service -which allows users to upload AVC/H.264 video to its website, and such -AVC Video is delivered to End Users for free, then such video would -receive coverage under the sublicense for Internet Broadcast AVC -Video, which is not subject to any royalties for the life of the AVC -License. This would also apply in the scenario where a user creates a -free online account in order to receive a customized offering of free -AVC Video content. In other words, as long as the End User is given -access to or views AVC Video content at no cost to the End User, then -no royalties would be payable under our AVC License.
- -On the other hand, if End Users pay for access to AVC Video for a -specific period of time (e.g., one month, one year, etc.), then such -video would constitute Subscription AVC Video. In cases where AVC -Video is delivered to End Users on a pay-per-view basis, then such -content would constitute Title-by-Title AVC Video. If a party offers -Subscription or Title-by-Title AVC Video to End Users, then they would -be responsible for paying the applicable royalties you noted below.
- -Finally, in the case where AVC Video is distributed for free -through an "over-the-air, satellite and/or cable transmission", then -such content would constitute Free Television AVC Video and would be -subject to the applicable royalties.
- -For your reference, I have attached -a -.pdf copy of the AVC License. You will find the relevant -sublicense information regarding AVC Video in Sections 2.2 through -2.5, and the corresponding royalties in Section 3.1.2 through 3.1.4. -You will also find the definitions of Title-by-Title AVC Video, -Subscription AVC Video, Free Television AVC Video, and Internet -Broadcast AVC Video in Section 1 of the License. Please note that the -electronic copy is provided for informational purposes only and cannot -be used for execution.
- -I hope the above information is helpful. If you have additional -questions or need further assistance with the AVC License, please feel -free to contact me directly.
-
Having a fresh copy of the license text was useful, and knowing -that the definition of Title-by-Title required payment per title made -me aware that my earlier understanding of that phrase had been wrong. -But I still had a few questions:
- --- -I have a small followup question. Would it be possible for me to get -a license with MPEG LA even if there are no royalties to be paid? The -reason I ask, is that some video related products have a copyright -clause limiting their use without a license with MPEG LA. The clauses -typically look similar to this: - -
- This product is licensed under the AVC patent portfolio license for - the personal and non-commercial use of a consumer to (a) encode - video in compliance with the AVC standard ("AVC video") and/or (b) - decode AVC video that was encoded by a consumer engaged in a - personal and non-commercial activity and/or AVC video that was - obtained from a video provider licensed to provide AVC video. No - license is granted or shall be implied for any other use. additional - information may be obtained from MPEG LA L.L.C. -- -It is unclear to me if this clause mean that I need to enter into -an agreement with MPEG LA to use the product in question, even if -there are no royalties to be paid to MPEG LA. I suspect it will -differ depending on the jurisdiction, and mine is Norway. What is -MPEG LAs view on this?
-
According to the answer, MPEG LA believe those using such tools for -non-personal or commercial use need a license with them:
- -- -- -With regard to the Notice to Customers, I would like to begin by -clarifying that the Notice from Section 7.1 of the AVC License -reads:
- -THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR -THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT -RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC -STANDARD ("AVC VIDEO") AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED -BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM -A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED -OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE -OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM
- -The Notice to Customers is intended to inform End Users of the -personal usage rights (for example, to watch video content) included -with the product they purchased, and to encourage any party using the -product for commercial purposes to contact MPEG LA in order to become -licensed for such use (for example, when they use an AVC Product to -deliver Title-by-Title, Subscription, Free Television or Internet -Broadcast AVC Video to End Users, or to re-Sell a third party's AVC -Product as their own branded AVC Product).
- -Therefore, if a party is to be licensed for its use of an AVC -Product to Sell AVC Video on a Title-by-Title, Subscription, Free -Television or Internet Broadcast basis, that party would need to -conclude the AVC License, even in the case where no royalties were -payable under the License. On the other hand, if that party (either a -Consumer or business customer) simply uses an AVC Product for their -own internal purposes and not for the commercial purposes referenced -above, then such use would be included in the royalty paid for the AVC -Products by the licensed supplier.
- -Finally, I note that our AVC License provides worldwide coverage in -countries that have AVC Patent Portfolio Patents, including -Norway.
- -I hope this clarification is helpful. If I may be of any further -assistance, just let me know.
-
The mentioning of Norwegian patents made me a bit confused, so I -asked for more information:
- -- -- -But one minor question at the end. If I understand you correctly, -you state in the quote above that there are patents in the AVC Patent -Portfolio that are valid in Norway. This make me believe I read the -list available from <URL: -http://www.mpegla.com/main/programs/AVC/Pages/PatentList.aspx -> incorrectly, as I believed the "NO" prefix in front of patents -were Norwegian patents, and the only one I could find under Mitsubishi -Electric Corporation expired in 2012. Which patents are you referring -to that are relevant for Norway?
- -
Again, the quick answer explained how to read the list of patents -in that list:
- -- -- -Your understanding is correct that the last AVC Patent Portfolio -Patent in Norway expired on 21 October 2012. Therefore, where AVC -Video is both made and Sold in Norway after that date, then no -royalties would be payable for such AVC Video under the AVC License. -With that said, our AVC License provides historic coverage for AVC -Products and AVC Video that may have been manufactured or Sold before -the last Norwegian AVC patent expired. I would also like to clarify -that coverage is provided for the country of manufacture and the -country of Sale that has active AVC Patent Portfolio Patents.
- -Therefore, if a party offers AVC Products or AVC Video for Sale in -a country with active AVC Patent Portfolio Patents (for example, -Sweden, Denmark, Finland, etc.), then that party would still need -coverage under the AVC License even if such products or video are -initially made in a country without active AVC Patent Portfolio -Patents (for example, Norway). Similarly, a party would need to -conclude the AVC License if they make AVC Products or AVC Video in a -country with active AVC Patent Portfolio Patents, but eventually Sell -such AVC Products or AVC Video in a country without active AVC Patent -Portfolio Patents.
-
As far as I understand it, MPEG LA believe anyone using Adobe -Premiere and other video related software with a H.264 distribution -license need a license agreement with MPEG LA to use such tools for -anything non-private or commercial, while it is OK to set up a -Youtube-like service as long as no-one pays to get access to the -content. I still have no clear idea how this applies to Norway, where -none of the patents MPEG LA is licensing are valid. Will the -copyright terms take precedence or can those terms be ignored because -the patents are not valid in Norway?
+ +A blog post from my fellow Debian developer Paul Wise titled +"The +GPL is not magic pixie dust" explain the importance of making sure +the GPL is enforced. +I quote the blog post from Paul in full here with his permission:
+ +
+ + + ++ ++The GPL is not magic pixie dust. It does not work by itself.+ +
+ +The first step is to choose a +copyleft license for your +code.
+ +The next step is, when someone fails to follow that copyleft license, +it must be enforced
+ +and its a simple fact of our modern society that such type of +work
+ +is incredibly expensive to do and incredibly difficult to do. +-- Bradley Kuhn, in +FaiF +episode +0x57
+ +As the Debian Website +used +to +imply, public domain and permissively licensed software can lead to +the production of more proprietary software as people discover useful +software, extend it and or incorporate it into their hardware or +software products. Copyleft licenses such as the GNU GPL were created +to close off this avenue to the production of proprietary software but +such licenses are not enough. With the ongoing adoption of Free +Software by individuals and groups, inevitably the community's +expectations of license compliance are violated, usually out of +ignorance of the way Free Software works, but not always. As Karen +and Bradley explained in FaiF +episode 0x57, +copyleft is nothing if no-one is willing and able to stand up in court +to protect it. The reality of today's world is that legal +representation is expensive, difficult and time consuming. With +gpl-violations.org in hiatus +until +some time in 2016, the Software +Freedom Conservancy (a tax-exempt charity) is the major defender +of the Linux project, Debian and other groups against GPL violations. +In March the SFC supported a +lawsuit +by Christoph Hellwig against VMware for refusing to +comply +with the GPL in relation to their use of parts of the Linux +kernel. Since then two of their sponsors pulled corporate funding and +conferences +blocked +or cancelled their talks. As a result they have decided to rely +less on corporate funding and more on the broad community of +individuals who support Free Software and copyleft. So the SFC has +launched +a campaign to create +a community of folks who stand up for copyleft and the GPL by +supporting their work on promoting and supporting copyleft and Free +Software.
+ +If you support Free Software, +like +what the SFC do, agree with their +compliance +principles, are happy about their +successes in 2015, +work on a project that is an SFC +member and or +just want to stand up for copyleft, please join +Christopher +Allan Webber, +Carol +Smith, +Jono +Bacon, myself and +others in +becoming a +supporter. For the +next week your donation will be +matched +by an anonymous donor. Please also consider asking your employer to +match your donation or become a sponsor of SFC. Don't forget to +spread the word about your support for SFC via email, your blog and or +social media accounts.
+ +
I agree with Paul on this topic and just signed up as a Supporter +of Software Freedom Conservancy myself. Perhaps you should be a +supporter too?
Several people contacted me after my previous blog post about my -need for a new laptop, and provided very useful feedback. I wish to -thank every one of these. Several pointed me to the possibility of -fixing my X230, and I am already in the process of getting Lenovo to -do so thanks to the on site, next day support contract covering the -machine. But the battery is almost useless (I expect to replace it -with a non-official battery) and I do not expect the machine to live -for many more years, so it is time to plan its replacement. If I did -not have a support contract, it was suggested to find replacement parts -using FrancEcrans, but it -might present a language barrier as I do not understand French.
- -One tip I got was to use the -Skinflint web service to -compare laptop models. It seem to have more models available than -prisjakt.no. Another tip I got from someone I know have similar -keyboard preferences was that the HP EliteBook 840 keyboard is not -very good, and this matches my experience with earlier EliteBook -keyboards I tested. Because of this, I will not consider it any further. - -
When I wrote my blog post, I was not aware of Thinkpad X250, the -newest Thinkpad X model. The keyboard reintroduces mouse buttons -(which is missing from the X240), and is working fairly well with -Debian Sid/Unstable according to -Corsac.net. The reports I -got on the keyboard quality are not consistent. Some say the keyboard -is good, others say it is ok, while others say it is not very good. -Those with experience from X41 and and X60 agree that the X250 -keyboard is not as good as those trusty old laptops, and suggest I -keep and fix my X230 instead of upgrading, or get a used X230 to -replace it. I'm also told that the X250 lack leds for caps lock, disk -activity and battery status, which is very convenient on my X230. I'm -also told that the CPU fan is running very often, making it a bit -noisy. In any case, the X250 do not work out of the box with Debian -Stable/Jessie, one of my requirements.
- -I have also gotten a few vendor proposals, one was -Pro-Star, another was -Libreboot. -The latter look very attractive to me.
- -Again, thank you all for the very useful feedback. It help a lot -as I keep looking for a replacement.
- -Update 2015-07-06: I was recommended to check out the -lapstore.de web shop for used laptops. They got several -different -old -thinkpad X models, and provide one year warranty.
+ +I've needed a new OpenPGP key for a while, but have not had time to +set it up properly. I wanted to generate it offline and have it +available on a OpenPGP +smart card for daily use, and learning how to do it and finding +time to sit down with an offline machine almost took forever. But +finally I've been able to complete the process, and have now moved +from my old GPG key to a new GPG key. See +the +full transition statement, signed with both my old and new key for +the details. This is my new key:
+ ++pub 3936R/111D6B29EE4E02F9 2015-11-03 [expires: 2019-11-14] + Key fingerprint = 3AC7 B2E3 ACA5 DF87 78F1 D827 111D 6B29 EE4E 02F9 +uid Petter Reinholdtsen <pere@hungry.com> +uid Petter Reinholdtsen <pere@debian.org> +sub 4096R/87BAFB0E 2015-11-03 [expires: 2019-11-02] +sub 4096R/F91E6DE9 2015-11-03 [expires: 2019-11-02] +sub 4096R/A0439BAB 2015-11-03 [expires: 2019-11-02] ++ +
The key can be downloaded from the OpenPGP key servers, signed by +my old key.
+ +If you signed my old key +(DB4CCC4B2A30D729), +I'd very much appreciate a signature on my new key, details and +instructions in the transition statement. I m happy to reciprocate if +you have a similarly signed transition statement to present.
Archive
-
+
- 2016
+
-
+
+
- January (3) + +
- February (2) + +
+
- 2015
-
@@ -872,7 +853,11 @@ thinkpad X models, and provide one year warranty.
- September (2) -
- October (2) +
- October (9) + +
- November (6) + +
- December (3)
@@ -1074,7 +1059,7 @@ thinkpad X models, and provide one year warranty.
- bankid (4) -
- bitcoin (8) +
- bitcoin (9)
- bootsystem (15) @@ -1082,25 +1067,25 @@ thinkpad X models, and provide one year warranty.
- chrpath (2) -
- debian (112) +
- debian (120) -
- debian edu (153) +
- debian edu (154)
- digistan (10)
- dld (15) -
- docbook (18) +
- docbook (20)
- drivstoffpriser (4) -
- english (289) +
- english (302)
- fiksgatami (23)
- fildeling (12) -
- freeculture (20) +
- freeculture (25)
- freedombox (9) @@ -1110,7 +1095,7 @@ thinkpad X models, and provide one year warranty.
- intervju (42) -
- isenkram (10) +
- isenkram (11)
- kart (19) @@ -1124,19 +1109,21 @@ thinkpad X models, and provide one year warranty.
- mesh network (8) -
- multimedia (36) +
- multimedia (37) + +
- nice free software (7) -
- norsk (265) +
- norsk (273)
- nuug (177) -
- offentlig innsyn (20) +
- offentlig innsyn (22)
- open311 (2) -
- opphavsrett (53) +
- opphavsrett (58) -
- personvern (87) +
- personvern (92)
- raid (1) @@ -1154,7 +1141,7 @@ thinkpad X models, and provide one year warranty.
- scraperwiki (2) -
- sikkerhet (42) +
- sikkerhet (45)
- sitesummary (4) @@ -1166,7 +1153,7 @@ thinkpad X models, and provide one year warranty.
- stortinget (10) -
- surveillance (34) +
- surveillance (36)
- sysadmin (2) @@ -1174,11 +1161,11 @@ thinkpad X models, and provide one year warranty.
- valg (8) -
- video (54) +
- video (55)
- vitenskap (4) -
- web (37) +
- web (38)