<atom:link href="http://people.skolelinux.org/pere/blog/index.rss" rel="self" type="application/rss+xml" />
<item>
- <title>All drones should be radio marked with what they do and who they belong to</title>
- <link>http://people.skolelinux.org/pere/blog/All_drones_should_be_radio_marked_with_what_they_do_and_who_they_belong_to.html</link>
- <guid isPermaLink="true">http://people.skolelinux.org/pere/blog/All_drones_should_be_radio_marked_with_what_they_do_and_who_they_belong_to.html</guid>
- <pubDate>Thu, 21 Nov 2013 15:40:00 +0100</pubDate>
- <description>Drones, flying robots, are getting more and more popular. The most
-know ones are the killer drones used by some government to murder
-people they do not like without giving them the chance of a fair
-trial, but the technology have many good uses too, from mapping and
-forest maintenance to photography and search and rescue. I am sure it
-is just a question of time before "bad drones" are in the hands of
-private enterprises and not only state criminals but petty criminals
-too. The drone technology is very useful and very dangerous. To have
-some control over the use of drones, I agree with Daniel Suarez in his
-TED talk
-"<a href="http://www.ted.com/talks/daniel_suarez_the_kill_decision_shouldn_t_belong_to_a_robot.html">The
-kill decision shouldn't belong to a robot</a>", where he suggested this
-little gem to keep the good while limiting the bad use of drones:</p>
-
-<blockquote>
-
-<p>Each robot and drone should have a cryptographically signed
-I.D. burned in at the factory that can be used to track its movement
-through public spaces. We have license plates on cars, tail numbers on
-aircraft. This is no different. And every citizen should be able to
-download an app that shows the population of drones and autonomous
-vehicles moving through public spaces around them, both right now and
-historically. And civic leaders should deploy sensors and civic drones
-to detect rogue drones, and instead of sending killer drones of their
-own up to shoot them down, they should notify humans to their
-presence. And in certain very high-security areas, perhaps civic
-drones would snare them and drag them off to a bomb disposal facility.</p>
-
-<p>But notice, this is more an immune system than a weapons system. It
-would allow us to avail ourselves of the use of autonomous vehicles
-and drones while still preserving our open, civil society.</p>
-
-</blockquote>
-
-<p>The key is that <em>every citizen</em> should be able to read the
-radio beacons sent from the drones in the area, to be able to check
-both the government and others use of drones. For such control to be
-effective, everyone must be able to do it. What should such beacon
-contain? At least formal owner, purpose, contact information and GPS
-location. Probably also the origin and target position of the current
-flight. And perhaps some registration number to be able to look up
-the drone in a central database tracking their movement. Robots
-should not have privacy. It is people who need privacy.</p>
-</description>
- </item>
-
- <item>
- <title>Lets make a wireless community network in Oslo!</title>
- <link>http://people.skolelinux.org/pere/blog/Lets_make_a_wireless_community_network_in_Oslo_.html</link>
- <guid isPermaLink="true">http://people.skolelinux.org/pere/blog/Lets_make_a_wireless_community_network_in_Oslo_.html</guid>
- <pubDate>Wed, 13 Nov 2013 21:00:00 +0100</pubDate>
- <description><p>Today NUUG and Hackeriet announced
-<a href="http://www.nuug.no/news/Bli_med___bygge_dugnadsnett_for_alle_i_Oslo.shtml">our
-plans to join forces and create a wireless community network in
-Oslo</a>. The workshop to help people get started will take place
-Thursday 2013-11-28, but we already are collecting the geolocation of
-people joining forces to make this happen. We have
-<a href="https://github.com/petterreinholdtsen/meshfx-node/blob/master/oslo-nodes.geojson">9
-locations plotted on the map</a>, but we will need more before we have
-a connected mesh spread across Oslo. If this sound interesting to
-you, please join us at the workshop. If you are too impatient to wait
-15 days, please join us on the IRC channel
-<a href="irc://irc.freenode.net/%23nuug">#nuug on irc.freenode.net</a>
-right away. :)</p>
-</description>
- </item>
-
- <item>
- <title>Running TP-Link MR3040 as a batman-adv mesh node using openwrt</title>
- <link>http://people.skolelinux.org/pere/blog/Running_TP_Link_MR3040_as_a_batman_adv_mesh_node_using_openwrt.html</link>
- <guid isPermaLink="true">http://people.skolelinux.org/pere/blog/Running_TP_Link_MR3040_as_a_batman_adv_mesh_node_using_openwrt.html</guid>
- <pubDate>Sun, 10 Nov 2013 23:00:00 +0100</pubDate>
- <description><p>Continuing my research into mesh networking, I was recommended to
-use TP-Link 3040 and 3600 access points as mesh nodes, and the pair I
-bought arrived on Friday. Here are my notes on how to set up the
-MR3040 as a mesh node using
-<a href="http://www.openwrt.org/">OpenWrt</a>.</p>
-
-<p>I started by following the instructions on the OpenWRT wiki for
-<a href="http://wiki.openwrt.org/toh/tp-link/tl-mr3040">TL-MR3040</a>,
-and downloaded
-<a href="http://downloads.openwrt.org/snapshots/trunk/ar71xx/openwrt-ar71xx-generic-tl-mr3040-v2-squashfs-factory.bin">the
-recommended firmware image</a>
-(openwrt-ar71xx-generic-tl-mr3040-v2-squashfs-factory.bin) and
-uploaded it into the original web interface. The flashing went fine,
-and the machine was available via telnet on the ethernet port. After
-logging in and setting the root password, ssh was available and I
-could start to set it up as a batman-adv mesh node.</p>
-
-<p>I started off by reading the instructions from
-<a href="http://wirelessafrica.meraka.org.za/wiki/index.php?title=Antoine's_Research">Wireless
-Africa</a>, which had quite a lot of useful information, but
-eventually I followed the recipe from the Open Mesh wiki for
-<a href="http://www.open-mesh.org/projects/batman-adv/wiki/Batman-adv-openwrt-config">using
-batman-adv on OpenWrt</a>. A small snag was the fact that the
-<tt>opkg install kmod-batman-adv</tt> command did not work as it
-should. The batman-adv kernel module would fail to load because its
-dependency crc16 was not already loaded. I
-<a href="https://dev.openwrt.org/ticket/14452">reported the bug</a> to
-the openwrt project and hope it will be fixed soon. But the problem
-only seem to affect initial testing of batman-adv, as configuration
-seem to work when booting from scratch.</p>
-
-<p>The setup is done using files in /etc/config/. I did not bridge
-the Ethernet and mesh interfaces this time, to be able to hook up the
-box on my local network and log into it for configuration updates.
-The following files were changed and look like this after modifying
-them:</p>
-
-<p><tt>/etc/config/network</tt></p>
+ <title>Språkkoder for POSIX locale i Norge</title>
+ <link>http://people.skolelinux.org/pere/blog/Spr_kkoder_for_POSIX_locale_i_Norge.html</link>
+ <guid isPermaLink="true">http://people.skolelinux.org/pere/blog/Spr_kkoder_for_POSIX_locale_i_Norge.html</guid>
+ <pubDate>Fri, 11 Apr 2014 21:30:00 +0200</pubDate>
+ <description><p>For 12 år siden, skrev jeg et lite notat om
+<a href="http://i18n.skolelinux.no/localekoder.txt">bruk av språkkoder
+i Norge</a>. Jeg ble nettopp minnet på dette da jeg fikk spørsmål om
+notatet fortsatt var aktuelt, og tenkte det var greit å repetere hva
+som fortsatt gjelder. Det jeg skrev da er fortsatt like aktuelt.</p>
+
+<p>Når en velger språk i programmer på unix, så velger en blant mange
+språkkoder. For språk i Norge anbefales følgende språkkoder (anbefalt
+locale i parantes):</p>
+
+<p><dl>
+<dt>nb (nb_NO)</dt><dd>Bokmål i Norge</dd>
+<dt>nn (nn_NO)</dt><dd>Nynorsk i Norge</dd>
+<dt>se (se_NO)</dt><dd>Nordsamisk i Norge</dd>
+</dl></p>
+
+<p>Alle programmer som bruker andre koder bør endres.</p>
+
+<p>Språkkoden bør brukes når .po-filer navngis og installeres. Dette
+er ikke det samme som locale-koden. For Norsk Bokmål, så bør filene
+være navngitt nb.po, mens locale (LANG) bør være nb_NO.</p>
+
+<p>Hvis vi ikke får standardisert de kodene i alle programmene med
+norske oversettelser, så er det umulig å gi LANG-variablen ett innhold
+som fungerer for alle programmer.</p>
+
+<p>Språkkodene er de offisielle kodene fra ISO 639, og bruken av dem i
+forbindelse med POSIX localer er standardisert i RFC 3066 og ISO
+15897. Denne anbefalingen er i tråd med de angitte standardene.</p>
+
+<p>Følgende koder er eller har vært i bruk som locale-verdier for
+"norske" språk. Disse bør unngås, og erstattes når de oppdages:</p>
-<pre>
+<p><table>
+<tr><td>norwegian</td><td>-> nb_NO</td></tr>
+<tr><td>bokmål </td><td>-> nb_NO</td></tr>
+<tr><td>bokmal </td><td>-> nb_NO</td></tr>
+<tr><td>nynorsk </td><td>-> nn_NO</td></tr>
+<tr><td>no </td><td>-> nb_NO</td></tr>
+<tr><td>no_NO </td><td>-> nb_NO</td></tr>
+<tr><td>no_NY </td><td>-> nn_NO</td></tr>
+<tr><td>sme_NO </td><td>-> se_NO</td></tr>
+</table></p>
-config interface 'loopback'
- option ifname 'lo'
- option proto 'static'
- option ipaddr '127.0.0.1'
- option netmask '255.0.0.0'
-
-config globals 'globals'
- option ula_prefix 'fdbf:4c12:3fed::/48'
-
-config interface 'lan'
- option ifname 'eth0'
- option type 'bridge'
- option proto 'dhcp'
- option ipaddr '192.168.1.1'
- option netmask '255.255.255.0'
- option hostname 'tl-mr3040'
- option ip6assign '60'
-
-config interface 'mesh'
- option ifname 'adhoc0'
- option mtu '1528'
- option proto 'batadv'
- option mesh 'bat0'
-</pre>
+<p>Merk at når det gjelder de samiske språkene, at se_NO i praksis
+henviser til nordsamisk i Norge, mens f.eks. smj_NO henviser til
+lulesamisk. Dette notatet er dog ikke ment å gi råd rundt samiske
+språkkoder, der gjør
+<a href="http://www.divvun.no/">Divvun-prosjektet</a> en bedre
+jobb.</p>
-<p><tt>/etc/config/wireless</tt></p>
-<pre>
+<p><strong>Referanser:</strong></p>
-config wifi-device 'radio0'
- option type 'mac80211'
- option channel '11'
- option hwmode '11ng'
- option path 'platform/ar933x_wmac'
- option htmode 'HT20'
- list ht_capab 'SHORT-GI-20'
- list ht_capab 'SHORT-GI-40'
- list ht_capab 'RX-STBC1'
- list ht_capab 'DSSS_CCK-40'
- option disabled '0'
-
-config wifi-iface 'wmesh'
- option device 'radio0'
- option ifname 'adhoc0'
- option network 'mesh'
- option encryption 'none'
- option mode 'adhoc'
- option bssid '02:BA:00:00:00:01'
- option ssid 'meshfx@hackeriet'
-</pre>
-<p><tt>/etc/config/batman-adv</tt></p>
-<pre>
+<ul>
-config 'mesh' 'bat0'
- option interfaces 'adhoc0'
- option 'aggregated_ogms'
- option 'ap_isolation'
- option 'bonding'
- option 'fragmentation'
- option 'gw_bandwidth'
- option 'gw_mode'
- option 'gw_sel_class'
- option 'log_level'
- option 'orig_interval'
- option 'vis_mode'
- option 'bridge_loop_avoidance'
- option 'distributed_arp_table'
- option 'network_coding'
- option 'hop_penalty'
-
-# yet another batX instance
-# config 'mesh' 'bat5'
-# option 'interfaces' 'second_mesh'
-</pre>
+ <li><a href="http://www.rfc-base.org/rfc-3066.html">RFC 3066 - Tags
+ for the Identification of Languages</a> (Erstatter RFC 1766)</li>
+
+ <li><a href="http://www.loc.gov/standards/iso639-2/langcodes.html">ISO
+ 639</a> - Codes for the Representation of Names of Languages</li>
+
+ <li><a href="http://std.dkuug.dk/jtc1/sc22/wg20/docs/n897-14652w25.pdf">ISO
+ DTR 14652</a> - locale-standard Specification method for cultural
+ conventions</li>
+
+ <li><a href="http://std.dkuug.dk/jtc1/sc22/wg20/docs/n610.pdf">ISO
+ 15897: Registration procedures for cultural elements (cultural
+ registry)</a>,
+ <a href="http://std.dkuug.dk/jtc1/sc22/wg20/docs/n849-15897wd6.pdf">(nytt
+ draft)</a></li>
-<p>The mesh node is now operational. I have yet to test its range,
-but I hope it is good. I have not yet tested the TP-Link 3600 box
-still wrapped up in plastic.</p>
+ <li><a href="http://std.dkuug.dk/jtc1/sc22/wg20/">ISO/IEC
+ JTC1/SC22/WG20</a> - Gruppen for i18n-standardisering i ISO</li>
+
+<ul>
</description>
</item>
<item>
- <title>Debian init.d boot script example for rsyslog</title>
- <link>http://people.skolelinux.org/pere/blog/Debian_init_d_boot_script_example_for_rsyslog.html</link>
- <guid isPermaLink="true">http://people.skolelinux.org/pere/blog/Debian_init_d_boot_script_example_for_rsyslog.html</guid>
- <pubDate>Sat, 2 Nov 2013 22:40:00 +0100</pubDate>
- <description><p>If one of the points of switching to a new init system in Debian is
-<a href="http://thomas.goirand.fr/blog/?p=147">to get rid of huge
-init.d scripts</a>, I doubt we need to switch away from sysvinit and
-init.d scripts at all. Here is an example init.d script, ie a rewrite
-of /etc/init.d/rsyslog:</p>
-
-<p><pre>
-#!/lib/init/init-d-script
-### BEGIN INIT INFO
-# Provides: rsyslog
-# Required-Start: $remote_fs $time
-# Required-Stop: umountnfs $time
-# X-Stop-After: sendsigs
-# Default-Start: 2 3 4 5
-# Default-Stop: 0 1 6
-# Short-Description: enhanced syslogd
-# Description: Rsyslog is an enhanced multi-threaded syslogd.
-# It is quite compatible to stock sysklogd and can be
-# used as a drop-in replacement.
-### END INIT INFO
-DESC="enhanced syslogd"
-DAEMON=/usr/sbin/rsyslogd
-</pre></p>
-
-<p>Pretty minimalistic to me... For the record, the original sysv-rc
-script was 137 lines, and the above is just 15 lines, most of it meta
-info/comments.</p>
-
-<p>How to do this, you ask? Well, one create a new script
-/lib/init/init-d-script looking something like this:
-
-<p><pre>
-#!/bin/sh
-
-# Define LSB log_* functions.
-# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
-# and status_of_proc is working.
-. /lib/lsb/init-functions
-
+ <title>S3QL, a locally mounted cloud file system - nice free software</title>
+ <link>http://people.skolelinux.org/pere/blog/S3QL__a_locally_mounted_cloud_file_system___nice_free_software.html</link>
+ <guid isPermaLink="true">http://people.skolelinux.org/pere/blog/S3QL__a_locally_mounted_cloud_file_system___nice_free_software.html</guid>
+ <pubDate>Wed, 9 Apr 2014 11:30:00 +0200</pubDate>
+ <description><p>For a while now, I have been looking for a sensible offsite backup
+solution for use at home. My requirements are simple, it must be
+cheap and locally encrypted (in other words, I keep the encryption
+keys, the storage provider do not have access to my private files).
+One idea me and my friends had many years ago, before the cloud
+storage providers showed up, was to use Google mail as storage,
+writing a Linux block device storing blocks as emails in the mail
+service provided by Google, and thus get heaps of free space. On top
+of this one can add encryption, RAID and volume management to have
+lots of (fairly slow, I admit that) cheap and encrypted storage. But
+I never found time to implement such system. But the last few weeks I
+have looked at a system called
+<a href="https://bitbucket.org/nikratio/s3ql/">S3QL</a>, a locally
+mounted network backed file system with the features I need.</p>
+
+<p>S3QL is a fuse file system with a local cache and cloud storage,
+handling several different storage providers, any with Amazon S3,
+Google Drive or OpenStack API. There are heaps of such storage
+providers. S3QL can also use a local directory as storage, which
+combined with sshfs allow for file storage on any ssh server. S3QL
+include support for encryption, compression, de-duplication, snapshots
+and immutable file systems, allowing me to mount the remote storage as
+a local mount point, look at and use the files as if they were local,
+while the content is stored in the cloud as well. This allow me to
+have a backup that should survive fire. The file system can not be
+shared between several machines at the same time, as only one can
+mount it at the time, but any machine with the encryption key and
+access to the storage service can mount it if it is unmounted.</p>
+
+<p>It is simple to use. I'm using it on Debian Wheezy, where the
+package is included already. So to get started, run <tt>apt-get
+install s3ql</tt>. Next, pick a storage provider. I ended up picking
+Greenqloud, after reading their nice recipe on
+<a href="https://greenqloud.zendesk.com/entries/44611757-How-To-Use-S3QL-to-mount-a-StorageQloud-bucket-on-Debian-Wheezy">how
+to use S3QL with their Amazon S3 service</a>, because I trust the laws
+in Iceland more than those in USA when it come to keeping my personal
+data safe and private, and thus would rather spend money on a company
+in Iceland. Another nice recipe is available from the article
+<a href="http://www.admin-magazine.com/HPC/Articles/HPC-Cloud-Storage">S3QL
+Filesystem for HPC Storage</a> by Jeff Layton in the HPC section of
+Admin magazine. When the provider is picked, figure out how to get
+the API key needed to connect to the storage API. With Greencloud,
+the key did not show up until I had added payment details to my
+account.</p>
+
+<p>Armed with the API access details, it is time to create the file
+system. First, create a new bucket in the cloud. This bucket is the
+file system storage area. I picked a bucket name reflecting the
+machine that was going to store data there, but any name will do.
+I'll refer to it as <tt>bucket-name</tt> below. In addition, one need
+the API login and password, and a locally created password. Store it
+all in ~root/.s3ql/authinfo2 like this:
+
+<p><blockquote><pre>
+[s3c]
+storage-url: s3c://s.greenqloud.com:443/bucket-name
+backend-login: API-login
+backend-password: API-password
+fs-passphrase: local-password
+</pre></blockquote></p>
+
+<p>I create my local passphrase using <tt>pwget 50</tt> or similar,
+but any sensible way to create a fairly random password should do it.
+Armed with these details, it is now time to run mkfs, entering the API
+details and password to create it:</p>
+
+<p><blockquote><pre>
+# mkdir -m 700 /var/lib/s3ql-cache
+# mkfs.s3ql --cachedir /var/lib/s3ql-cache --authfile /root/.s3ql/authinfo2 \
+ --ssl s3c://s.greenqloud.com:443/bucket-name
+Enter backend login:
+Enter backend password:
+Before using S3QL, make sure to read the user's guide, especially
+the 'Important Rules to Avoid Loosing Data' section.
+Enter encryption password:
+Confirm encryption password:
+Generating random encryption key...
+Creating metadata tables...
+Dumping metadata...
+..objects..
+..blocks..
+..inodes..
+..inode_blocks..
+..symlink_targets..
+..names..
+..contents..
+..ext_attributes..
+Compressing and uploading metadata...
+Wrote 0.00 MB of compressed metadata.
+# </pre></blockquote></p>
+
+<p>The next step is mounting the file system to make the storage available.
+
+<p><blockquote><pre>
+# mount.s3ql --cachedir /var/lib/s3ql-cache --authfile /root/.s3ql/authinfo2 \
+ --ssl --allow-root s3c://s.greenqloud.com:443/bucket-name /s3ql
+Using 4 upload threads.
+Downloading and decompressing metadata...
+Reading metadata...
+..objects..
+..blocks..
+..inodes..
+..inode_blocks..
+..symlink_targets..
+..names..
+..contents..
+..ext_attributes..
+Mounting filesystem...
+# df -h /s3ql
+Filesystem Size Used Avail Use% Mounted on
+s3c://s.greenqloud.com:443/bucket-name 1.0T 0 1.0T 0% /s3ql
#
-# Function that starts the daemon/service
-
-#
-do_start()
-{
- # Return
- # 0 if daemon has been started
- # 1 if daemon was already running
- # 2 if daemon could not be started
- start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
- || return 1
- start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
- $DAEMON_ARGS \
- || return 2
- # Add code here, if necessary, that waits for the process to be ready
- # to handle requests from services started subsequently which depend
- # on this one. As a last resort, sleep for some time.
-}
-
+</pre></blockquote></p>
+
+<p>The file system is now ready for use. I use rsync to store my
+backups in it, and as the metadata used by rsync is downloaded at
+mount time, no network traffic (and storage cost) is triggered by
+running rsync. To unmount, one should not use the normal umount
+command, as this will not flush the cache to the cloud storage, but
+instead running the umount.s3ql command like this:
+
+<p><blockquote><pre>
+# umount.s3ql /s3ql
+#
+</pre></blockquote></p>
+
+<p>There is a fsck command available to check the file system and
+correct any problems detected. This can be used if the local server
+crashes while the file system is mounted, to reset the "already
+mounted" flag. This is what it look like when processing a working
+file system:</p>
+
+<p><blockquote><pre>
+# fsck.s3ql --force --ssl s3c://s.greenqloud.com:443/bucket-name
+Using cached metadata.
+File system seems clean, checking anyway.
+Checking DB integrity...
+Creating temporary extra indices...
+Checking lost+found...
+Checking cached objects...
+Checking names (refcounts)...
+Checking contents (names)...
+Checking contents (inodes)...
+Checking contents (parent inodes)...
+Checking objects (reference counts)...
+Checking objects (backend)...
+..processed 5000 objects so far..
+..processed 10000 objects so far..
+..processed 15000 objects so far..
+Checking objects (sizes)...
+Checking blocks (referenced objects)...
+Checking blocks (refcounts)...
+Checking inode-block mapping (blocks)...
+Checking inode-block mapping (inodes)...
+Checking inodes (refcounts)...
+Checking inodes (sizes)...
+Checking extended attributes (names)...
+Checking extended attributes (inodes)...
+Checking symlinks (inodes)...
+Checking directory reachability...
+Checking unix conventions...
+Checking referential integrity...
+Dropping temporary indices...
+Backing up old metadata...
+Dumping metadata...
+..objects..
+..blocks..
+..inodes..
+..inode_blocks..
+..symlink_targets..
+..names..
+..contents..
+..ext_attributes..
+Compressing and uploading metadata...
+Wrote 0.89 MB of compressed metadata.
+#
+</pre></blockquote></p>
+
+<p>Thanks to the cache, working on files that fit in the cache is very
+quick, about the same speed as local file access. Uploading large
+amount of data is to me limited by the bandwidth out of and into my
+house. Uploading 685 MiB with a 100 MiB cache gave me 305 kiB/s,
+which is very close to my upload speed, and downloading the same
+Debian installation ISO gave me 610 kiB/s, close to my download speed.
+Both were measured using <tt>dd</tt>. So for me, the bottleneck is my
+network, not the file system code. I do not know what a good cache
+size would be, but suspect that the cache should e larger than your
+working set.</p>
+
+<p>I mentioned that only one machine can mount the file system at the
+time. If another machine try, it is told that the file system is
+busy:</p>
+
+<p><blockquote><pre>
+# mount.s3ql --cachedir /var/lib/s3ql-cache --authfile /root/.s3ql/authinfo2 \
+ --ssl --allow-root s3c://s.greenqloud.com:443/bucket-name /s3ql
+Using 8 upload threads.
+Backend reports that fs is still mounted elsewhere, aborting.
#
-# Function that stops the daemon/service
+</pre></blockquote></p>
+
+<p>The file content is uploaded when the cache is full, while the
+metadata is uploaded once every 24 hour by default. To ensure the
+file system content is flushed to the cloud, one can either umount the
+file system, or ask S3QL to flush the cache and metadata using
+s3qlctrl:
+
+<p><blockquote><pre>
+# s3qlctrl upload-meta /s3ql
+# s3qlctrl flushcache /s3ql
+#
+</pre></blockquote></p>
+
+<p>If you are curious about how much space your data uses in the
+cloud, and how much compression and deduplication cut down on the
+storage usage, you can use s3qlstat on the mounted file system to get
+a report:</p>
+
+<p><blockquote><pre>
+# s3qlstat /s3ql
+Directory entries: 9141
+Inodes: 9143
+Data blocks: 8851
+Total data size: 22049.38 MB
+After de-duplication: 21955.46 MB (99.57% of total)
+After compression: 21877.28 MB (99.22% of total, 99.64% of de-duplicated)
+Database size: 2.39 MB (uncompressed)
+(some values do not take into account not-yet-uploaded dirty blocks in cache)
#
-do_stop()
-{
- # Return
- # 0 if daemon has been stopped
- # 1 if daemon was already stopped
- # 2 if daemon could not be stopped
- # other if a failure occurred
- start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
- RETVAL="$?"
- [ "$RETVAL" = 2 ] && return 2
- # Wait for children to finish too if this is a daemon that forks
- # and if the daemon is only ever run from this initscript.
- # If the above conditions are not satisfied then add some other code
- # that waits for the process to drop all resources that could be
- # needed by services started subsequently. A last resort is to
- # sleep for some time.
- start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
- [ "$?" = 2 ] && return 2
- # Many daemons don't delete their pidfiles when they exit.
- rm -f $PIDFILE
- return "$RETVAL"
-}
-
-#
-# Function that sends a SIGHUP to the daemon/service
-#
-do_reload() {
- #
- # If the daemon can reload its configuration without
- # restarting (for example, when it is sent a SIGHUP),
- # then implement that here.
- #
- start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
- return 0
-}
-
-SCRIPTNAME=$1
-scriptbasename="$(basename $1)"
-echo "SN: $scriptbasename"
-if [ "$scriptbasename" != "init-d-library" ] ; then
- script="$1"
- shift
- . $script
-else
- exit 0
-fi
-
-NAME=$(basename $DAEMON)
-PIDFILE=/var/run/$NAME.pid
-
-# Exit if the package is not installed
-#[ -x "$DAEMON" ] || exit 0
-
-# Read configuration variable file if it is present
-[ -r /etc/default/$NAME ] && . /etc/default/$NAME
-
-# Load the VERBOSE setting and other rcS variables
-. /lib/init/vars.sh
-
-case "$1" in
- start)
- [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
- do_start
- case "$?" in
- 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
- 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
- esac
- ;;
- stop)
- [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
- do_stop
- case "$?" in
- 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
- 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
- esac
- ;;
- status)
- status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
- ;;
- #reload|force-reload)
- #
- # If do_reload() is not implemented then leave this commented out
- # and leave 'force-reload' as an alias for 'restart'.
- #
- #log_daemon_msg "Reloading $DESC" "$NAME"
- #do_reload
- #log_end_msg $?
- #;;
- restart|force-reload)
- #
- # If the "reload" option is implemented then remove the
- # 'force-reload' alias
- #
- log_daemon_msg "Restarting $DESC" "$NAME"
- do_stop
- case "$?" in
- 0|1)
- do_start
- case "$?" in
- 0) log_end_msg 0 ;;
- 1) log_end_msg 1 ;; # Old process is still running
- *) log_end_msg 1 ;; # Failed to start
- esac
- ;;
- *)
- # Failed to stop
- log_end_msg 1
- ;;
- esac
- ;;
- *)
- echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
- exit 3
- ;;
-esac
-
-:
-</pre></p>
-
-<p>It is based on /etc/init.d/skeleton, and could be improved quite a
-lot. I did not really polish the approach, so it might not always
-work out of the box, but you get the idea. I did not try very hard to
-optimize it nor make it more robust either.</p>
-
-<p>A better argument for switching init system in Debian than reducing
-the size of init scripts (which is a good thing to do anyway), is to
-get boot system that is able to handle the kernel events sensibly and
-robustly, and do not depend on the boot to run sequentially. The boot
-and the kernel have not behaved sequentially in years.</p>
+</pre></blockquote></p>
+
+<p>I mentioned earlier that there are several possible suppliers of
+storage. I did not try to locate them all, but am aware of at least
+<a href="https://www.greenqloud.com/">Greenqloud</a>,
+<a href="http://drive.google.com/">Google Drive</a>,
+<a href="http://aws.amazon.com/s3/">Amazon S3 web serivces</a>,
+<a href="http://www.rackspace.com/">Rackspace</a> and
+<a href="http://crowncloud.net/">Crowncloud</A>. The latter even
+accept payment in Bitcoin. Pick one that suit your need. Some of
+them provide several GiB of free storage, but the prize models are
+quite different and you will have to figure out what suits you
+best.</p>
+
+<p>While researching this blog post, I had a look at research papers
+and posters discussing the S3QL file system. There are several, which
+told me that the file system is getting a critical check by the
+science community and increased my confidence in using it. One nice
+poster is titled
+"<a href="http://www.lanl.gov/orgs/adtsc/publications/science_highlights_2013/docs/pg68_69.pdf">An
+Innovative Parallel Cloud Storage System using OpenStack’s SwiftObject
+Store and Transformative Parallel I/O Approach</a>" by Hsing-Bung
+Chen, Benjamin McClelland, David Sherrill, Alfred Torrez, Parks Fields
+and Pamela Smith. Please have a look.</p>
+
+<p>Given my problems with different file systems earlier, I decided to
+check out the mounted S3QL file system to see if it would be usable as
+a home directory (in other word, that it provided POSIX semantics when
+it come to locking and umask handling etc). Running
+<a href="http://people.skolelinux.org/pere/blog/Testing_if_a_file_system_can_be_used_for_home_directories___.html">my
+test code to check file system semantics</a>, I was happy to discover that
+no error was found. So the file system can be used for home
+directories, if one chooses to do so.</p>
+
+<p>If you do not want a locally file system, and want something that
+work without the Linux fuse file system, I would like to mention the
+<a href="http://www.tarsnap.com/">Tarsnap service</a>, which also
+provide locally encrypted backup using a command line client. It have
+a nicer access control system, where one can split out read and write
+access, allowing some systems to write to the backup and others to
+only read from it.</p>
+
+<p>As usual, if you use Bitcoin and want to show your support of my
+activities, please send Bitcoin donations to my address
+<b><a href="bitcoin:15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b&label=PetterReinholdtsenBlog">15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b</a></b>.</p>
</description>
</item>
<item>
- <title>Browser plugin for SPICE (spice-xpi) uploaded to Debian</title>
- <link>http://people.skolelinux.org/pere/blog/Browser_plugin_for_SPICE__spice_xpi__uploaded_to_Debian.html</link>
- <guid isPermaLink="true">http://people.skolelinux.org/pere/blog/Browser_plugin_for_SPICE__spice_xpi__uploaded_to_Debian.html</guid>
- <pubDate>Fri, 1 Nov 2013 11:00:00 +0100</pubDate>
- <description><p><a href="http://www.spice-space.org/">The SPICE protocol</a> for
-remote display access is the preferred solution with oVirt and RedHat
-Enterprise Virtualization, and I was sad to discover the other day
-that the browser plugin needed to use these systems seamlessly was
-missing in Debian. The <a href="http://bugs.debian.org/668284">request
-for a package</a> was from 2012-04-10 with no progress since
-2013-04-01, so I decided to wrap up a package based on the great work
-from Cajus Pollmeier and put it in a collab-maint maintained git
-repository to get a package I could use. I would very much like
-others to help me maintain the package (or just take over, I do not
-mind), but as no-one had volunteered so far, I just uploaded it to
-NEW. I hope it will be available in Debian in a few days.</p>
-
-<p>The source is now available from
-<a href="http://anonscm.debian.org/gitweb/?p=collab-maint/spice-xpi.git;a=summary">http://anonscm.debian.org/gitweb/?p=collab-maint/spice-xpi.git;a=summary</a>.</p>
+ <title>EU-domstolen bekreftet i dag at datalagringsdirektivet er ulovlig</title>
+ <link>http://people.skolelinux.org/pere/blog/EU_domstolen_bekreftet_i_dag_at_datalagringsdirektivet_er_ulovlig.html</link>
+ <guid isPermaLink="true">http://people.skolelinux.org/pere/blog/EU_domstolen_bekreftet_i_dag_at_datalagringsdirektivet_er_ulovlig.html</guid>
+ <pubDate>Tue, 8 Apr 2014 11:30:00 +0200</pubDate>
+ <description><p>I dag kom endelig avgjørelsen fra EU-domstolen om
+datalagringsdirektivet, som ikke overraskende ble dømt ulovlig og i
+strid med borgernes grunnleggende rettigheter. Hvis du lurer på hva
+datalagringsdirektivet er for noe, så er det
+<a href="http://tv.nrk.no/program/koid75005313/tema-dine-digitale-spor-datalagringsdirektivet">en
+flott dokumentar tilgjengelig hos NRK</a> som jeg tidligere
+<a href="http://people.skolelinux.org/pere/blog/Dokumentaren_om_Datalagringsdirektivet_sendes_endelig_p__NRK.html">har
+anbefalt</a> alle å se.</p>
+
+<p>Her er et liten knippe nyhetsoppslag om saken, og jeg regner med at
+det kommer flere ut over dagen. Flere kan finnes
+<a href="http://www.mylder.no/?drill=datalagringsdirektivet&intern=1">via
+mylder</a>.</p>
+
+<p><ul>
+
+<li><a href="http://e24.no/digital/eu-domstolen-datalagringsdirektivet-er-ugyldig/22879592">EU-domstolen:
+Datalagringsdirektivet er ugyldig</a> - e24.no 2014-04-08
+
+<li><a href="http://www.aftenposten.no/nyheter/iriks/EU-domstolen-Datalagringsdirektivet-er-ulovlig-7529032.html">EU-domstolen:
+Datalagringsdirektivet er ulovlig</a> - aftenposten.no 2014-04-08
+
+<li><a href="http://www.aftenposten.no/nyheter/iriks/politikk/Krever-DLD-stopp-i-Norge-7530086.html">Krever
+DLD-stopp i Norge</a> - aftenposten.no 2014-04-08
+
+<li><a href="http://www.p4.no/story.aspx?id=566431">Apenes: - En
+gledens dag</a> - p4.no 2014-04-08
+
+<li><a href="http://www.nrk.no/norge/_-datalagringsdirektivet-er-ugyldig-1.11655929">EU-domstolen:
+– Datalagringsdirektivet er ugyldig</a> - nrk.no 2014-04-08</li>
+
+<li><a href="http://www.vg.no/nyheter/utenriks/data-og-nett/eu-domstolen-datalagringsdirektivet-er-ugyldig/a/10130280/">EU-domstolen:
+Datalagringsdirektivet er ugyldig</a> - vg.no 2014-04-08</li>
+
+<li><a href="http://www.dagbladet.no/2014/04/08/nyheter/innenriks/datalagringsdirektivet/personvern/32711646/">-
+Vi bør skrote hele datalagringsdirektivet</a> - dagbladet.no
+2014-04-08</li>
+
+<li><a href="http://www.digi.no/928137/eu-domstolen-dld-er-ugyldig">EU-domstolen:
+DLD er ugyldig</a> - digi.no 2014-04-08</li>
+
+<li><a href="http://www.irishtimes.com/business/sectors/technology/european-court-declares-data-retention-directive-invalid-1.1754150">European
+court declares data retention directive invalid</a> - irishtimes.com
+2014-04-08</li>
+
+<li><a href="http://www.reuters.com/article/2014/04/08/us-eu-data-ruling-idUSBREA370F020140408?feedType=RSS">EU
+court rules against requirement to keep data of telecom users</a> -
+reuters.com 2014-04-08</li>
+
+</ul>
+</p>
+
+<p>Jeg synes det er veldig fint at nok en stemme slår fast at
+totalitær overvåkning av befolkningen er uakseptabelt, men det er
+fortsatt like viktig å beskytte privatsfæren som før, da de
+teknologiske mulighetene fortsatt finnes og utnyttes, og jeg tror
+innsats i prosjekter som
+<a href="https://wiki.debian.org/FreedomBox">Freedombox</a> og
+<a href="http://www.dugnadsnett.no/">Dugnadsnett</a> er viktigere enn
+noen gang.</p>
+
+<p><strong>Update 2014-04-08 12:10</strong>: Kronerullingen for å
+stoppe datalagringsdirektivet i Norge gjøres hos foreningen
+<a href="http://www.digitaltpersonvern.no/">Digitalt Personvern</a>,
+som har samlet inn 843 215,- så langt men trenger nok mye mer hvis
+
+ikke Høyre og Arbeiderpartiet bytter mening i saken. Det var
+<a href="http://www.holderdeord.no/parliament-issues/48650">kun
+partinene Høyre og Arbeiderpartiet</a> som stemte for
+Datalagringsdirektivet, og en av dem må bytte mening for at det skal
+bli flertall mot i Stortinget. Se mer om saken
+<a href="http://www.holderdeord.no/issues/69-innfore-datalagringsdirektivet">Holder
+de ord</a>.</p>
</description>
</item>
<item>
- <title>Teaching vmdebootstrap to create Raspberry Pi SD card images</title>
- <link>http://people.skolelinux.org/pere/blog/Teaching_vmdebootstrap_to_create_Raspberry_Pi_SD_card_images.html</link>
- <guid isPermaLink="true">http://people.skolelinux.org/pere/blog/Teaching_vmdebootstrap_to_create_Raspberry_Pi_SD_card_images.html</guid>
- <pubDate>Sun, 27 Oct 2013 17:00:00 +0100</pubDate>
- <description><p>The
-<a href="http://packages.qa.debian.org/v/vmdebootstrap.html">vmdebootstrap</a>
-program is a a very nice system to create virtual machine images. It
-create a image file, add a partition table, mount it and run
-debootstrap in the mounted directory to create a Debian system on a
-stick. Yesterday, I decided to try to teach it how to make images for
-<a href="https://wiki.debian.org/RaspberryPi">Raspberry Pi</a>, as part
-of a plan to simplify the build system for
-<a href="https://wiki.debian.org/FreedomBox">the FreedomBox
-project</a>. The FreedomBox project already uses vmdebootstrap for
-the virtualbox images, but its current build system made multistrap
-based system for Dreamplug images, and it is lacking support for
-Raspberry Pi.</p>
-
-<p>Armed with the knowledge on how to build "foreign" (aka non-native
-architecture) chroots for Raspberry Pi, I dived into the vmdebootstrap
-code and adjusted it to be able to build armel images on my amd64
-Debian laptop. I ended up giving vmdebootstrap five new options,
-allowing me to replicate the image creation process I use to make
-<a href="http://people.skolelinux.org/pere/blog/A_Raspberry_Pi_based_batman_adv_Mesh_network_node.html">Debian
-Jessie based mesh node images for the Raspberry Pi</a>. First, the
-<tt>--foreign /path/to/binfm_handler</tt> option tell vmdebootstrap to
-call debootstrap with --foreign and to copy the handler into the
-generated chroot before running the second stage. This allow
-vmdebootstrap to create armel images on an amd64 host. Next I added
-two new options <tt>--bootsize size</tt> and <tt>--boottype
-fstype</tt> to teach it to create a separate /boot/ partition with the
-given file system type, allowing me to create an image with a vfat
-partition for the /boot/ stuff. I also added a <tt>--variant
-variant</tt> option to allow me to create smaller images without the
-Debian base system packages installed. Finally, I added an option
-<tt>--no-extlinux</tt> to tell vmdebootstrap to not install extlinux
-as a boot loader. It is not needed on the Raspberry Pi and probably
-most other non-x86 architectures. The changes were accepted by the
-upstream author of vmdebootstrap yesterday and today, and is now
-available from
-<a href="http://git.liw.fi/cgi-bin/cgit/cgit.cgi/vmdebootstrap/">the
-upstream project page</a>.</p>
-
-<p>To use it to build a Raspberry Pi image using Debian Jessie, first
-create a small script (the customize script) to add the non-free
-binary blob needed to boot the Raspberry Pi and the APT source
-list:</p>
-
-<p><pre>
-#!/bin/sh
-set -e # Exit on first error
-rootdir="$1"
-cd "$rootdir"
-cat &lt;&lt;EOF > etc/apt/sources.list
-deb http://http.debian.net/debian/ jessie main contrib non-free
-EOF
-# Install non-free binary blob needed to boot Raspberry Pi. This
-# install a kernel somewhere too.
-wget https://raw.github.com/Hexxeh/rpi-update/master/rpi-update \
- -O $rootdir/usr/bin/rpi-update
-chmod a+x $rootdir/usr/bin/rpi-update
-mkdir -p $rootdir/lib/modules
-touch $rootdir/boot/start.elf
-chroot $rootdir rpi-update
-</pre></p>
-
-<p>Next, fetch the latest vmdebootstrap script and call it like this
-to build the image:</p>
-
-<pre>
-sudo ./vmdebootstrap \
- --variant minbase \
- --arch armel \
- --distribution jessie \
- --mirror http://http.debian.net/debian \
- --image test.img \
- --size 600M \
- --bootsize 64M \
- --boottype vfat \
- --log-level debug \
- --verbose \
- --no-kernel \
- --no-extlinux \
- --root-password raspberry \
- --hostname raspberrypi \
- --foreign /usr/bin/qemu-arm-static \
- --customize `pwd`/customize \
- --package netbase \
- --package git-core \
- --package binutils \
- --package ca-certificates \
- --package wget \
- --package kmod
-</pre></p>
-
-<p>The list of packages being installed are the ones needed by
-rpi-update to make the image bootable on the Raspberry Pi, with the
-exception of netbase, which is needed by debootstrap to find
-/etc/hosts with the minbase variant. I really wish there was a way to
-set up an Raspberry Pi using only packages in the Debian archive, but
-that is not possible as far as I know, because it boots from the GPU
-using a non-free binary blob.</p>
-
-<p>The build host need debootstrap, kpartx and qemu-user-static and
-probably a few others installed. I have not checked the complete
-build dependency list.</p>
-
-<p>The resulting image will not use the hardware floating point unit
-on the Raspberry PI, because the armel architecture in Debian is not
-optimized for that use. So the images created will be a bit slower
-than <a href="http://www.raspbian.org/">Raspbian</a> based images.</p>
+ <title>ReactOS Windows clone - nice free software</title>
+ <link>http://people.skolelinux.org/pere/blog/ReactOS_Windows_clone___nice_free_software.html</link>
+ <guid isPermaLink="true">http://people.skolelinux.org/pere/blog/ReactOS_Windows_clone___nice_free_software.html</guid>
+ <pubDate>Tue, 1 Apr 2014 12:10:00 +0200</pubDate>
+ <description><p>Microsoft have announced that Windows XP reaches its end of life
+2014-04-08, in 7 days. But there are heaps of machines still running
+Windows XP, and depending on Windows XP to run their applications, and
+upgrading will be expensive, both when it comes to money and when it
+comes to the amount of effort needed to migrate from Windows XP to a
+new operating system. Some obvious options (buy new a Windows
+machine, buy a MacOSX machine, install Linux on the existing machine)
+are already well known and covered elsewhere. Most of them involve
+leaving the user applications installed on Windows XP behind and
+trying out replacements or updated versions. In this blog post I want
+to mention one strange bird that allow people to keep the hardware and
+the existing Windows XP applications and run them on a free software
+operating system that is Windows XP compatible.</p>
+
+<p><a href="http://www.reactos.org/">ReactOS</a> is a free software
+operating system (GNU GPL licensed) working on providing a operating
+system that is binary compatible with Windows, able to run windows
+programs directly and to use Windows drivers for hardware directly.
+The project goal is for Windows user to keep their existing machines,
+drivers and software, and gain the advantages from user a operating
+system without usage limitations caused by non-free licensing. It is
+a Windows clone running directly on the hardware, so quite different
+from the approach taken by <a href="http://www.winehq.org/">the Wine
+project</a>, which make it possible to run Windows binaries on
+Linux.</p>
+
+<p>The ReactOS project share code with the Wine project, so most
+shared libraries available on Windows are already implemented already.
+There is also a software manager like the one we are used to on Linux,
+allowing the user to install free software applications with a simple
+click directly from the Internet. Check out the
+<a href="http://www.reactos.org/screenshots">screen shots on the
+project web site</a> for an idea what it look like (it looks just like
+Windows before metro).</p>
+
+<p>I do not use ReactOS myself, preferring Linux and Unix like
+operating systems. I've tested it, and it work fine in a virt-manager
+virtual machine. The browser, minesweeper, notepad etc is working
+fine as far as I can tell. Unfortunately, my main test application
+is the software included on a CD with the Lego Mindstorms NXT, which
+seem to install just fine from CD but fail to leave any binaries on
+the disk after the installation. So no luck with that test software.
+No idea why, but hope someone else figure out and fix the problem.
+I've tried the ReactOS Live ISO on a physical machine, and it seemed
+to work just fine. If you like Windows and want to keep running your
+old Windows binaries, check it out by
+<a href="http://www.reactos.org/download">downloading</a> the
+installation CD, the live CD or the preinstalled virtual machine
+image.</p>
</description>
</item>
<item>
- <title>Det er jo makta som er mest sårbar ved massiv overvåkning av Internett</title>
- <link>http://people.skolelinux.org/pere/blog/Det_er_jo_makta_som_er_mest_s_rbar_ved_massiv_overv_kning_av_Internett.html</link>
- <guid isPermaLink="true">http://people.skolelinux.org/pere/blog/Det_er_jo_makta_som_er_mest_s_rbar_ved_massiv_overv_kning_av_Internett.html</guid>
- <pubDate>Sat, 26 Oct 2013 20:30:00 +0200</pubDate>
- <description><p>De siste måneders eksponering av
-<a href="http://www.aftenposten.no/nyheter/uriks/Her-er-Edvard-Snowdens-mest-omtalte-avsloringer-7351734.html">den
-totale overvåkningen som foregår i den vestlige verden dokumenterer
-hvor sårbare vi er</a>. Men det slår meg at de som er mest sårbare
-for dette, myndighetspersoner på alle nivåer, neppe har innsett at de
-selv er de mest interessante personene å lage profiler på, for å kunne
-påvirke dem.</p>
-
-<p>For å ta et lite eksempel: Stortingets nettsted,
-<a href="http://www.stortinget.no/">www.stortinget.no</a> (og
-forsåvidt også
-<a href="http://data.stortinget.no/">data.stortinget.no</a>),
-inneholder informasjon om det som foregår på Stortinget, og jeg antar
-de største brukerne av informasjonen der er representanter og
-rådgivere på Stortinget. Intet overraskende med det. Det som derimot
-er mer skjult er at Stortingets nettsted bruker
-<a href="http://en.wikipedia.org/wiki/Google_Analytics">Google
-Analytics</a>, hvilket gjør at enhver som besøker nettsidene der også
-rapporterer om besøket via Internett-linjer som passerer Sverige,
-England og videre til USA. Det betyr at informasjon om ethvert besøk
-på stortingets nettsider kan snappes opp av svensk, britisk og USAs
-etterretningsvesen. De kan dermed holde et øye med hvilke
-Stortingssaker stortingsrepresentantene synes er interessante å sjekke
-ut, og hvilke sider rådgivere og andre på stortinget synes er
-interessant å besøke, når de gjør det og hvilke andre representanter
-som sjekker de samme sidene omtrent samtidig. Stortingets bruk av
-Google Analytics gjør det dermed enkelt for utenlands etteretning å
-spore representantenes aktivitet og interesse. Hvis noen av
-representantene bruker Google Mail eller noen andre tjenestene som
-krever innlogging, så vil det være enda enklere å finne ut nøyaktig
-hvilke personer som bruker hvilke nettlesere og dermed knytte
-informasjonen opp til enkeltpersoner på Stortinget.</p>
-
-<p>Og jo flere nettsteder som bruker Google Analytics, jo bedre
-oversikt over stortingsrepresentantenes lesevaner og interesse blir
-tilgjengelig for svensk, britisk og USAs etterretning. Hva de kan
-bruke den informasjonen til overlater jeg til leseren å undres
-over.</p>
+ <title>Debian Edu interview: Roger Marsal</title>
+ <link>http://people.skolelinux.org/pere/blog/Debian_Edu_interview__Roger_Marsal.html</link>
+ <guid isPermaLink="true">http://people.skolelinux.org/pere/blog/Debian_Edu_interview__Roger_Marsal.html</guid>
+ <pubDate>Sun, 30 Mar 2014 11:40:00 +0200</pubDate>
+ <description><p><a href="http://www.skolelinux.org/">Debian Edu / Skolelinux</a>
+keep gaining new users. Some weeks ago, a person showed up on IRC,
+<a href="irc://irc.debian.org/#debian-edu">#debian-edu</a>, with a
+wish to contribute, and I managed to get a interview with this great
+contributor Roger Marsal to learn more about his background.</p>
+
+<p><strong>Who are you, and how do you spend your days?</strong></p>
+
+<p>My name is Roger Marsal, I'm 27 years old (1986 generation) and I
+live in Barcelona, Spain. I've got a strong business background and I
+work as a patrimony manager and as a real estate agent. Additionally,
+I've co-founded a British based tech company that is nowadays on the
+last development phase of a new social networking concept.</p>
+
+<p>I'm a Linux enthusiast that started its journey with Ubuntu four years
+ago and have recently switched to Debian seeking rock solid stability
+and as a necessary step to gain expertise.</p>
+
+<p>In a nutshell, I spend my days working and learning as much as I
+can to face both my job, entrepreneur project and feed my Linux
+hunger.</p>
+
+<p><strong>How did you get in contact with the Skolelinux / Debian Edu
+project?</strong></p>
+
+<p>I discovered the <a href="http://www.ltsp.org/">LTSP</a> advantages
+with "Ubuntu 12.04 alternate install" and after a year of use I
+started looking for an alternative. Even though I highly value and
+respect the Ubuntu project, I thought it was necessary for me to
+change to a more robust and stable alternative. As far as I was using
+Debian on my personal laptop I thought it would be fine to install
+Debian and configure an LTSP server myself. Surprised, I discovered
+that the Debian project also supported a kind of Edubuntu equivalent,
+and after having some pain I obtained a Debian Edu network up and
+running. I just loved it.</p>
+
+<p><strong>What do you see as the advantages of Skolelinux / Debian
+Edu?</strong></p>
+
+<p>I found a main advantage in that, once you know "the tips and
+tricks", a new installation just works out of the box. It's the most
+complete alternative I've found to create an LTSP network. All the
+other distributions seems to be made of plastic, Debian Edu seems to
+be made of steel.</p>
+
+<p><strong>What do you see as the disadvantages of Skolelinux / Debian
+Edu?</strong></p>
+
+<p>I found two main disadvantages.</p>
+
+<p>I'm not an expert but I've got notions and I had to spent a considerable
+amount of time trying to bring up a standard network topology. I'm quite
+stubborn and I just worked until I did but I'm sure many people with few
+resources (not big schools, but academies for example) would have switched
+or dropped.</p>
+
+<p>It's amazing how such a complex system like Debian Edu has achieved
+this out-of-the-box state. Even though tweaking without breaking gets
+more difficult, as more factors have to be considered. This can
+discourage many people too.</p>
+
+<p><strong>Which free software do you use daily?</strong></p>
+
+<p>I use Debian, Firefox, Okular, Inkscape, LibreOffice and
+Virtualbox.</p>
+
+
+<p><strong>Which strategy do you believe is the right one to use to
+get schools to use free software?</strong></p>
+
+<p>I don't think there is a need for a particular strategy. The free
+attribute in both "freedom" and "no price" meanings is what will
+really bring free software to schools. In my experience I can think of
+the <a href="http://www.r-project.org/">"R" statistical language</a>; a
+few years a ago was an extremely nerd tool for university people.
+Today it's being increasingly used to teach statistics at many
+different level of studies. I believe free and open software will
+increasingly gain popularity, but I'm sure schools will be one of the
+first scenarios where this will happen.</p>
</description>
</item>
<item>
- <title>A Raspberry Pi based batman-adv Mesh network node</title>
- <link>http://people.skolelinux.org/pere/blog/A_Raspberry_Pi_based_batman_adv_Mesh_network_node.html</link>
- <guid isPermaLink="true">http://people.skolelinux.org/pere/blog/A_Raspberry_Pi_based_batman_adv_Mesh_network_node.html</guid>
- <pubDate>Mon, 21 Oct 2013 11:40:00 +0200</pubDate>
- <description><p>The last few days I have been experimenting with
-<a href="http://www.open-mesh.org/projects/batman-adv/wiki">the
-batman-adv mesh technology</a>. I want to gain some experience to see
-if it will fit <a href="https://wiki.debian.org/FreedomBox">the
-Freedombox project</a>, and together with my neighbors try to build a
-mesh network around the park where I live. Batman-adv is a layer 2
-mesh system ("ethernet" in other words), where the mesh network appear
-as if all the mesh clients are connected to the same switch.</p>
-
-<p>My hardware of choice was the Linksys WRT54GL routers I had lying
-around, but I've been unable to get them working with batman-adv. So
-instead, I started playing with a
-<a href="http://www.raspberrypi.org/">Raspberry Pi</a>, and tried to
-get it working as a mesh node. My idea is to use it to create a mesh
-node which function as a switch port, where everything connected to
-the Raspberry Pi ethernet plug is connected (bridged) to the mesh
-network. This allow me to hook a wifi base station like the Linksys
-WRT54GL to the mesh by plugging it into a Raspberry Pi, and allow
-non-mesh clients to hook up to the mesh. This in turn is useful for
-Android phones using <a href="http://servalproject.org/">the Serval
-Project</a> voip client, allowing every one around the playground to
-phone and message each other for free. The reason is that Android
-phones do not see ad-hoc wifi networks (they are filtered away from
-the GUI view), and can not join the mesh without being rooted. But if
-they are connected using a normal wifi base station, they can talk to
-every client on the local network.</p>
-
-<p>To get this working, I've created a debian package
-<a href="https://github.com/petterreinholdtsen/meshfx-node">meshfx-node</a>
-and a script
-<a href="https://github.com/petterreinholdtsen/meshfx-node/blob/master/build-rpi-mesh-node">build-rpi-mesh-node</a>
-to create the Raspberry Pi boot image. I'm using Debian Jessie (and
-not Raspbian), to get more control over the packages available.
-Unfortunately a huge binary blob need to be inserted into the boot
-image to get it booting, but I'll ignore that for now. Also, as
-Debian lack support for the CPU features available in the Raspberry
-Pi, the system do not use the hardware floating point unit. I hope
-the routing performance isn't affected by the lack of hardware FPU
-support.</p>
-
-<p>To create an image, run the following with a sudo enabled user
-after inserting the target SD card into the build machine:</p>
-
-<p><pre>
-% wget -O build-rpi-mesh-node \
- https://raw.github.com/petterreinholdtsen/meshfx-node/master/build-rpi-mesh-node
-% sudo bash -x ./build-rpi-mesh-node > build.log 2>&1
-% dd if=/root/rpi/rpi_basic_jessie_$(date +%Y%m%d).img of=/dev/mmcblk0 bs=1M
-%
-</pre></p>
-
-<p>Booting with the resulting SD card on a Raspberry PI with a USB
-wifi card inserted should give you a mesh node. At least it does for
-me with a the wifi card I am using. The default mesh settings are the
-ones used by the Oslo mesh project at Hackeriet, as I mentioned in
-<a href="http://people.skolelinux.org/pere/blog/Oslo_community_mesh_network___with_NUUG_and_Hackeriet_at_Hausmania.html">an
-earlier blog post about this mesh testing</a>.</p>
-
-<p>The mesh node was not horribly expensive either. I bought
-everything over the counter in shops nearby. If I had ordered online
-from the lowest bidder, the price should be significantly lower:</p>
-
-<p><table>
-
-<tr><th>Supplier</th><th>Model</th><th>NOK</th></tr>
-<tr><td>Teknikkmagasinet</td><td>Raspberry Pi model B</td><td>349.90</td></tr>
-<tr><td>Teknikkmagasinet</td><td>Raspberry Pi type B case</td><td>99.90</td></tr>
-<tr><td>Lefdal</td><td>Jensen Air:Link 25150</td><td>295.-</td></tr>
-<tr><td>Clas Ohlson</td><td>Kingston 16 GB SD card</td><td>199.-</td></tr>
-<tr><td>Total cost</td><td></td><td>943.80</td></tr>
-
-</table></p>
-
-<p>Now my mesh network at home consist of one laptop in the basement
-connected to my production network, one Raspberry Pi node on the 1th
-floor that can be seen by my neighbor across the park, and one
-play-node I use to develop the image building script. And some times
-I hook up my work horse laptop to the mesh to test it. I look forward
-to figuring out what kind of latency the batman-adv setup will give,
-and how much packet loss we will experience around the park. :)</p>
+ <title>Dokumentaren om Datalagringsdirektivet sendes endelig på NRK</title>
+ <link>http://people.skolelinux.org/pere/blog/Dokumentaren_om_Datalagringsdirektivet_sendes_endelig_p__NRK.html</link>
+ <guid isPermaLink="true">http://people.skolelinux.org/pere/blog/Dokumentaren_om_Datalagringsdirektivet_sendes_endelig_p__NRK.html</guid>
+ <pubDate>Wed, 26 Mar 2014 09:50:00 +0100</pubDate>
+ <description><p><a href="http://www.nuug.no/">Foreningen NUUG</a> melder i natt at
+NRK nå har bestemt seg for
+<a href="http://www.nuug.no/news/NRK_viser_filmen_om_Datalagringsdirektivet_f_rste_gang_2014_03_31.shtml">når
+den norske dokumentarfilmen om datalagringsdirektivet skal
+sendes</a> (se <a href="http://www.imdb.com/title/tt2832844/">IMDB</a>
+for detaljer om filmen) . Første visning blir på NRK2 mandag
+2014-03-31 kl. 19:50, og deretter visninger onsdag 2014-04-02
+kl. 12:30, fredag 2014-04-04 kl. 19:40 og søndag 2014-04-06 kl. 15:10.
+Jeg har sett dokumentaren, og jeg anbefaler enhver å se den selv. Som
+oppvarming mens vi venter anbefaler jeg Bjørn Stærks kronikk i
+Aftenposten fra i går,
+<a href="http://www.aftenposten.no/meninger/kronikker/Autoritar-gjokunge-7514915.html">Autoritær
+gjøkunge</a>, der han gir en grei skisse av hvor ille det står til med
+retten til privatliv og beskyttelsen av demokrati i Norge og resten
+verden, og helt riktig slår fast at det er vi i databransjen som
+sitter med nøkkelen til å gjøre noe med dette. Jeg har involvert meg
+i prosjektene <a href="http://www.dugnadsnett.no/">dugnadsnett.no</a>
+og <a href="https://wiki.debian.org/FreedomBox">FreedomBox</a> for å
+forsøke å gjøre litt selv for å bedre situasjonen, men det er mye
+hardt arbeid fra mange flere enn meg som gjenstår før vi kan sies å ha
+gjenopprettet balansen.</p>
+
+<p>Jeg regner med at nettutgaven dukker opp på
+<a href="http://tv.nrk.no/program/koid75005313/tema-dine-digitale-spor-datalagringsdirektivet">NRKs
+side om filmen om datalagringsdirektivet</a> om fem dager. Hold et
+øye med siden, og tips venner og slekt om at de også bør se den.</p>
</description>
</item>
<item>
- <title>Perl library to control the Spykee robot moved to github</title>
- <link>http://people.skolelinux.org/pere/blog/Perl_library_to_control_the_Spykee_robot_moved_to_github.html</link>
- <guid isPermaLink="true">http://people.skolelinux.org/pere/blog/Perl_library_to_control_the_Spykee_robot_moved_to_github.html</guid>
- <pubDate>Sat, 19 Oct 2013 10:20:00 +0200</pubDate>
- <description><p>Back in 2010, I created a Perl library to talk to
-<a href="http://en.wikipedia.org/wiki/Spykee">the Spykee robot</a>
-(with two belts, wifi, USB and Linux) and made it available from my
-web page. Today I concluded that it should move to a site that is
-easier to use to cooperate with others, and moved it to github. If
-you got a Spykee robot, you might want to check out
-<a href="https://github.com/petterreinholdtsen/libspykee-perl">the
-libspykee-perl github repository</a>.</p>
+ <title>Public Trusted Timestamping services for everyone</title>
+ <link>http://people.skolelinux.org/pere/blog/Public_Trusted_Timestamping_services_for_everyone.html</link>
+ <guid isPermaLink="true">http://people.skolelinux.org/pere/blog/Public_Trusted_Timestamping_services_for_everyone.html</guid>
+ <pubDate>Tue, 25 Mar 2014 12:50:00 +0100</pubDate>
+ <description><p>Did you ever need to store logs or other files in a way that would
+allow it to be used as evidence in court, and needed a way to
+demonstrate without reasonable doubt that the file had not been
+changed since it was created? Or, did you ever need to document that
+a given document was received at some point in time, like some
+archived document or the answer to an exam, and not changed after it
+was received? The problem in these settings is to remove the need to
+trust yourself and your computers, while still being able to prove
+that a file is the same as it was at some given time in the past.</p>
+
+<p>A solution to these problems is to have a trusted third party
+"stamp" the document and verify that at some given time the document
+looked a given way. Such
+<a href="https://en.wikipedia.org/wiki/Notarius">notarius</a> service
+have been around for thousands of years, and its digital equivalent is
+called a
+<a href="http://en.wikipedia.org/wiki/Trusted_timestamping">trusted
+timestamping service</a>. <a href="http://www.ietf.org/">The Internet
+Engineering Task Force</a> standardised how such service could work a
+few years ago as <a href="http://tools.ietf.org/html/rfc3161">RFC
+3161</a>. The mechanism is simple. Create a hash of the file in
+question, send it to a trusted third party which add a time stamp to
+the hash and sign the result with its private key, and send back the
+signed hash + timestamp. Both email, FTP and HTTP can be used to
+request such signature, depending on what is provided by the service
+used. Anyone with the document and the signature can then verify that
+the document matches the signature by creating their own hash and
+checking the signature using the trusted third party public key.
+There are several commercial services around providing such
+timestamping. A quick search for
+"<a href="https://duckduckgo.com/?q=rfc+3161+service">rfc 3161
+service</a>" pointed me to at least
+<a href="https://www.digistamp.com/technical/how-a-digital-time-stamp-works/">DigiStamp</a>,
+<a href="http://www.quovadisglobal.co.uk/CertificateServices/SigningServices/TimeStamp.aspx">Quo
+Vadis</a>,
+<a href="https://www.globalsign.com/timestamp-service/">Global Sign</a>
+and <a href="http://www.globaltrustfinder.com/TSADefault.aspx">Global
+Trust Finder</a>. The system work as long as the private key of the
+trusted third party is not compromised.</p>
+
+<p>But as far as I can tell, there are very few public trusted
+timestamp services available for everyone. I've been looking for one
+for a while now. But yesterday I found one over at
+<a href="https://www.pki.dfn.de/zeitstempeldienst/">Deutches
+Forschungsnetz</a> mentioned in
+<a href="http://www.d-mueller.de/blog/dealing-with-trusted-timestamps-in-php-rfc-3161/">a
+blog by David Müller</a>. I then found
+<a href="http://www.rz.uni-greifswald.de/support/dfn-pki-zertifikate/zeitstempeldienst.html">a
+good recipe on how to use the service</a> over at the University of
+Greifswald.</p>
+
+<p><a href="http://www.openssl.org/">The OpenSSL library</a> contain
+both server and tools to use and set up your own signing service. See
+the ts(1SSL), tsget(1SSL) manual pages for more details. The
+following shell script demonstrate how to extract a signed timestamp
+for any file on the disk in a Debian environment:</p>
+
+<p><blockquote><pre>
+#!/bin/sh
+set -e
+url="http://zeitstempel.dfn.de"
+caurl="https://pki.pca.dfn.de/global-services-ca/pub/cacert/chain.txt"
+reqfile=$(mktemp -t tmp.XXXXXXXXXX.tsq)
+resfile=$(mktemp -t tmp.XXXXXXXXXX.tsr)
+cafile=chain.txt
+if [ ! -f $cafile ] ; then
+ wget -O $cafile "$caurl"
+fi
+openssl ts -query -data "$1" -cert | tee "$reqfile" \
+ | /usr/lib/ssl/misc/tsget -h "$url" -o "$resfile"
+openssl ts -reply -in "$resfile" -text 1>&2
+openssl ts -verify -data "$1" -in "$resfile" -CAfile "$cafile" 1>&2
+base64 < "$resfile"
+rm "$reqfile" "$resfile"
+</pre></blockquote></p>
+
+<p>The argument to the script is the file to timestamp, and the output
+is a base64 encoded version of the signature to STDOUT and details
+about the signature to STDERR. Note that due to
+<a href="http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=742553">a bug
+in the tsget script</a>, you might need to modify the included script
+and remove the last line. Or just write your own HTTP uploader using
+curl. :) Now you too can prove and verify that files have not been
+changed.</p>
+
+<p>But the Internet need more public trusted timestamp services.
+Perhaps something for <a href="http://www.uninett.no/">Uninett</a> or
+my work place the <a href="http://www.uio.no/">University of Oslo</a>
+to set up?</p>
</description>
</item>
<item>
- <title>Good causes: Debian Outreach Program for Women, EFF documenting the spying and Open access in Norway</title>
- <link>http://people.skolelinux.org/pere/blog/Good_causes__Debian_Outreach_Program_for_Women__EFF_documenting_the_spying_and_Open_access_in_Norway.html</link>
- <guid isPermaLink="true">http://people.skolelinux.org/pere/blog/Good_causes__Debian_Outreach_Program_for_Women__EFF_documenting_the_spying_and_Open_access_in_Norway.html</guid>
- <pubDate>Tue, 15 Oct 2013 21:30:00 +0200</pubDate>
- <description><p>The last few days I came across a few good causes that should get
-wider attention. I recommend signing and donating to each one of
-these. :)</p>
-
-<p>Via <a href="http://www.debian.org/News/weekly/2013/18/">Debian
-Project News for 2013-10-14</a> I came across the Outreach Program for
-Women program which is a Google Summer of Code like initiative to get
-more women involved in free software. One debian sponsor has offered
-to match <a href="http://debian.ch/opw2013">any donation done to Debian
-earmarked</a> for this initiative. I donated a few minutes ago, and
-hope you will to. :)</p>
-
-<p>And the Electronic Frontier Foundation just announced plans to
-create <a href="https://supporters.eff.org/donate/nsa-videos">video
-documentaries about the excessive spying</a> on every Internet user that
-take place these days, and their need to fund the work. I've already
-donated. Are you next?</p>
-
-<p>For my Norwegian audience, the organisation Studentenes og
-Akademikernes Internasjonale Hjelpefond is collecting signatures for a
-statement under the heading
-<a href="http://saih.no/Bloggers_United/">Bloggers United for Open
-Access</a> for those of us asking for more focus on open access in the
-Norwegian government. So far 499 signatures. I hope you will sign it
-too.</p>
+ <title>Video DVD reader library / python-dvdvideo - nice free software</title>
+ <link>http://people.skolelinux.org/pere/blog/Video_DVD_reader_library___python_dvdvideo___nice_free_software.html</link>
+ <guid isPermaLink="true">http://people.skolelinux.org/pere/blog/Video_DVD_reader_library___python_dvdvideo___nice_free_software.html</guid>
+ <pubDate>Fri, 21 Mar 2014 15:25:00 +0100</pubDate>
+ <description><p>Keeping your DVD collection safe from scratches and curious
+children fingers while still having it available when you want to see a
+movie is not straight forward. My preferred method at the moment is
+to store a full copy of the ISO on a hard drive, and use VLC, Popcorn
+Hour or other useful players to view the resulting file. This way the
+subtitles and bonus material are still available and using the ISO is
+just like inserting the original DVD record in the DVD player.</p>
+
+<p>Earlier I used dd for taking security copies, but it do not handle
+DVDs giving read errors (which are quite a few of them). I've also
+tried using
+<a href="http://people.skolelinux.org/pere/blog/Ripping_problematic_DVDs_using_dvdbackup_and_genisoimage.html">dvdbackup
+and genisoimage</a>, but these days I use the marvellous python library
+and program
+<a href="http://bblank.thinkmo.de/blog/new-software-python-dvdvideo">python-dvdvideo</a>
+written by Bastian Blank. It is
+<a href="http://packages.qa.debian.org/p/python-dvdvideo.html">in Debian
+already</a> and the binary package name is python3-dvdvideo. Instead
+of trying to read every block from the DVD, it parses the file
+structure and figure out which block on the DVD is actually in used,
+and only read those blocks from the DVD. This work surprisingly well,
+and I have been able to almost backup my entire DVD collection using
+this method.</p>
+
+<p>So far, python-dvdvideo have failed on between 10 and
+20 DVDs, which is a small fraction of my collection. The most common
+problem is
+<a href="https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=720831">DVDs
+using UTF-16 instead of UTF-8 characters</a>, which according to
+Bastian is against the DVD specification (and seem to cause some
+players to fail too). A rarer problem is what seem to be inconsistent
+DVD structures, as the python library
+<a href="https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=723079">claim
+there is a overlap between objects</a>. An equally rare problem claim
+<a href="https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=741878">some
+value is out of range</a>. No idea what is going on there. I wish I
+knew enough about the DVD format to fix these, to ensure my movie
+collection will stay with me in the future.</p>
+
+<p>So, if you need to keep your DVDs safe, back them up using
+python-dvdvideo. :)</p>
+</description>
+ </item>
+
+ <item>
+ <title>Norsk utgave av Alaveteli / WhatDoTheyKnow på trappene</title>
+ <link>http://people.skolelinux.org/pere/blog/Norsk_utgave_av_Alaveteli___WhatDoTheyKnow_p__trappene.html</link>
+ <guid isPermaLink="true">http://people.skolelinux.org/pere/blog/Norsk_utgave_av_Alaveteli___WhatDoTheyKnow_p__trappene.html</guid>
+ <pubDate>Sun, 16 Mar 2014 09:30:00 +0100</pubDate>
+ <description><p>Det offentlige Norge har mye kunnskap og informasjon. Men hvordan
+kan en få tilgang til den på en enkel måte? Takket være et lite
+knippe lover og tilhørende forskrifter, blant annet
+<a href="http://lovdata.no/dokument/NL/lov/2006-05-19-16">offentlighetsloven</a>,
+<a href="http://lovdata.no/dokument/NL/lov/2003-05-09-31">miljøinformasjonsloven</a>
+og
+<a href="http://lovdata.no/dokument/NL/lov/1967-02-10/">forvaltningsloven</a>
+har en rett til å spørre det offentlige og få svar. Men det finnes
+intet offentlig arkiv over hva andre har spurt om, og dermed risikerer en
+å måtte forstyrre myndighetene gang på gang for å få tak i samme
+informasjonen på nytt. <a href="http://www.mysociety.org/">Britiske
+mySociety</a> har laget tjenesten
+<a href="http://www.whatdotheyknow.com/">WhatDoTheyKnow</a> som gjør
+noe med dette. I Storbritannia blir WhatdoTheyKnow brukt i
+<a href="http://www.mysociety.org/2011/07/01/whatdotheyknows-share-of-central-government-foi-requests-q2-2011/">ca
+15% av alle innsynsforespørsler mot sentraladministrasjonen</a>.
+Prosjektet heter <a href="http://www.alaveteli.org/">Alaveteli</A>, og
+er takk i bruk en rekke steder etter at løsningen ble generalisert og
+gjort mulig å oversette. Den hjelper borgerne med å be om innsyn,
+rådgir ved purringer og klager og lar alle se hvilke henvendelser som
+er sendt til det offentlige og hvilke svar som er kommet inn, i et
+søkpart arkiv. Her i Norge holder vi i foreningen NUUG på å få opp en
+norsk utgave av Alaveteli, og her trenger vi din hjelp med
+oversettelsen.</p>
+
+<p>Så langt er 76 % av Alaveteli oversatt til norsk bokmål, men vi
+skulle gjerne vært oppe i 100 % før lansering. Oversettelsen gjøres
+på <a href="https://www.transifex.com/projects/p/alaveteli/">Transifex,
+der enhver som registrerer seg</a> og ber om tilgang til
+bokmålsoversettelsen får bidra. Vi har satt opp en test av tjenesten
+(som ikke sender epost til det offentlige, kun til oss som holder på å
+sette opp tjenesten) på maskinen
+<a href="http://alaveteli-dev.nuug.no/">alaveteli-dev.nuug.no</a>, der
+en kan se hvordan de oversatte meldingen blir seende ut på nettsiden.
+Når tjenesten lanseres vil den hete
+<a href="https://www.mimesbrønn.no/">Mimes brønn</a>, etter
+visdomskilden som Odin måtte gi øyet sitt for å få drikke i. Den
+nettsiden er er ennå ikke klar til bruk.</p>
+
+<p>Hvis noen vil oversette til nynorsk også, så skal vi finne ut
+hvordan vi lager en flerspråklig tjeneste. Men i første omgang er
+fokus på bokmålsoversettelsen, der vi selv har nok peiling til å ha
+fått oversatt 76%, men trenger hjelp for å komme helt i mål. :)</p>
+</description>
+ </item>
+
+ <item>
+ <title>Freedombox on Dreamplug, Raspberry Pi and virtual x86 machine</title>
+ <link>http://people.skolelinux.org/pere/blog/Freedombox_on_Dreamplug__Raspberry_Pi_and_virtual_x86_machine.html</link>
+ <guid isPermaLink="true">http://people.skolelinux.org/pere/blog/Freedombox_on_Dreamplug__Raspberry_Pi_and_virtual_x86_machine.html</guid>
+ <pubDate>Fri, 14 Mar 2014 11:00:00 +0100</pubDate>
+ <description><p>The <a href="https://wiki.debian.org/FreedomBox">Freedombox
+project</a> is working on providing the software and hardware for
+making it easy for non-technical people to host their data and
+communication at home, and being able to communicate with their
+friends and family encrypted and away from prying eyes. It has been
+going on for a while, and is slowly progressing towards a new test
+release (0.2).</p>
+
+<p>And what day could be better than the Pi day to announce that the
+new version will provide "hard drive" / SD card / USB stick images for
+Dreamplug, Raspberry Pi and VirtualBox (or any other virtualization
+system), and can also be installed using a Debian installer preseed
+file. The Debian based Freedombox is now based on Debian Jessie,
+where most of the needed packages used are already present. Only one,
+the freedombox-setup package, is missing. To try to build your own
+boot image to test the current status, fetch the freedom-maker scripts
+and build using
+<a href="http://packages.qa.debian.org/vmdebootstrap">vmdebootstrap</a>
+with a user with sudo access to become root:
+
+<pre>
+git clone http://anonscm.debian.org/git/freedombox/freedom-maker.git \
+ freedom-maker
+sudo apt-get install git vmdebootstrap mercurial python-docutils \
+ mktorrent extlinux virtualbox qemu-user-static binfmt-support \
+ u-boot-tools
+make -C freedom-maker dreamplug-image raspberry-image virtualbox-image
+</pre>
+
+<p>Root access is needed to run debootstrap and mount loopback
+devices. See the README for more details on the build. If you do not
+want all three images, trim the make line. But note that thanks to <a
+href="https://bugs.debian.org/741407">a race condition in
+vmdebootstrap</a>, the build might fail without the patch to the
+kpartx call.</p>
+
+<p>If you instead want to install using a Debian CD and the preseed
+method, boot a Debian Wheezy ISO and use this boot argument to load
+the preseed values:</p>
+
+<pre>
+url=<a href="http://www.reinholdtsen.name/freedombox/preseed-jessie.dat">http://www.reinholdtsen.name/freedombox/preseed-jessie.dat</a>
+</pre>
+
+<p>But note that due to <a href="https://bugs.debian.org/740673">a
+recently introduced bug in apt in Jessie</a>, the installer will
+currently hang while setting up APT sources. Killing the
+'<tt>apt-cdrom ident</tt>' process when it hang a few times during the
+installation will get the installation going. This affect all
+installations in Jessie, and I expect it will be fixed soon.</p>
+
+<p>Give it a go and let us know how it goes on the mailing list, and help
+us get the new release published. :) Please join us on
+<a href="irc://irc.debian.org:6667/%23freedombox">IRC (#freedombox on
+irc.debian.org)</a> and
+<a href="http://lists.alioth.debian.org/mailman/listinfo/freedombox-discuss">the
+mailing list</a> if you want to help make this vision come true.</p>
</description>
</item>
projects / homepage.git / blobdiff