as I can tell the IP must be hardcoded for this to work. In other
words, if someone elses machine is going to do the steaming, you have
to update screenstream.m4u on the Kodi machine and adjust the vlc
-repice. To get started, locate the file in Kodi and select the m3u
+recipe. To get started, locate the file in Kodi and select the m3u
file while the VLC stream is running. The desktop then show up in my
big screen. :)</p>
loss or bad parameters for the transcode. I do not know VLC nor Kodi
enough to tell.</p>
+<p><strong>Update 2018-07-12</strong>: Johannes Schauer send me a few
+succestions and reminded me about an important step. The "screen:"
+input source is only available once the vlc-plugin-access-extra
+package is installed on Debian. Without it, you will see this error
+message: "VLC is unable to open the MRL 'screen://'. Check the log
+for details." He further found that it is possible to drop some parts
+of the VLC command line to reduce the amount of hardcoded information.
+It is also useful to consider using cvlc to avoid having the VLC
+window in the desktop view. In sum, this give us this command line on
+the source end
+
+<blockquote><pre>
+cvlc screen:// --sout \
+ '#transcode{vcodec=mp4v,acodec=mpga,vb=800,ab=128}:rtp{sdp=rtsp://:8080/}'
+</pre></blockquote>
+
+<p>and this on the Kodi end<p>
+
+<blockquote><pre>
+echo rtsp://192.168.11.4:8080/ \
+ > /storage/videos/screenstream.m3u
+</pre></blockquote>
+
+<p>Still bad image quality, though. But I did discover that streaming
+a DVD using dvdsimple:///dev/dvd as the source had excellent video and
+audio quality, so I guess the issue is in the input or transcoding
+parts, not the rtsp part. I've tried to change the vb and ab
+parameters to use more bandwidth, but it did not make a
+difference.</p>
+
+<p>I further received a suggestion from Einar Haraldseid to try using
+gstreamer instead of VLC, and this proved to work great! He also
+provided me with the trick to get Kodi to use a multicast stream as
+its source. By using this monstrous oneliner, I can stream my desktop
+with good video quality in reasonable framerate to the 239.255.0.1
+multicast address on port 1234:
+
+<blockquote><pre>
+gst-launch-1.0 ximagesrc use-damage=0 ! video/x-raw,framerate=30/1 ! \
+ videoconvert ! queue2 ! \
+ x264enc bitrate=8000 speed-preset=superfast tune=zerolatency qp-min=30 \
+ key-int-max=15 bframes=2 ! video/x-h264,profile=high ! queue2 ! \
+ mpegtsmux alignment=7 name=mux ! rndbuffersize max=1316 min=1316 ! \
+ udpsink host=239.255.0.1 port=1234 ttl-mc=0 auto-multicast=1 sync=0 \
+ pulsesrc device=$(pactl list | grep -A2 'Source #' | \
+ grep 'Name: .*\.monitor$' | cut -d" " -f2|head -1) ! \
+ audioconvert ! queue2 ! avenc_aac ! queue2 ! mux.
+</pre></blockquote>
+
+<p>and this on the Kodi end<p>
+
+<blockquote><pre>
+echo udp://@239.255.0.1:1234 \
+ > /storage/videos/screenstream.m3u
+</pre></blockquote>
+
+<p>Note the trick to pick a valid pulseaudio source. It might not
+pick the one you need. This approach will of course lead to trouble
+if more than one source uses the same multicast port and address.
+Note the ttl-mc=0 setting, which limit the multicast packages to the
+local network. If the value is increased, your screen will be
+broadcasted further, one network "hop" for each increase (read up on
+multicast to learn more. :)!</p>
+
+<p>Having cracked how to get Kodi to receive multicast streams, I
+could use this VLC command to stream to the same multicast address.
+The image quality is way better than the rtsp approach.</p>
+
+<blockquote><pre>
+cvlc screen:// --sout '#transcode{vcodec=mp4v,acodec=mpga,vb=800,ab=128}:rtp{mux=ts,dst=239.255.0.1,port=1234,sdp=sap}'
+</pre></blockquote>
+
<p>As usual, if you use Bitcoin and want to show your support of my
activities, please send Bitcoin donations to my address
<b><a href="bitcoin:15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b">15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b</a></b>.</p>
projects / homepage.git / blobdiff