+ <div class="entry">
+ <div class="title"><a href="http://people.skolelinux.org/pere/blog/Running_TP_Link_MR3040_as_a_batman_adv_mesh_node_using_openwrt.html">Running TP-Link MR3040 as a batman-adv mesh node using openwrt</a></div>
+ <div class="date">10th November 2013</div>
+ <div class="body"><p>Continuing my research into mesh networking, I was recommended to
+use TP-Link 3040 and 3600 access points as mesh nodes, and the pair I
+bought arrived on Friday. Here are my notes on how to set up the
+MR3040 as a mesh node using
+<a href="http://www.openwrt.org/">OpenWrt</a>.</p>
+
+<p>I started by following the instructions on the OpenWRT wiki for
+<a href="http://wiki.openwrt.org/toh/tp-link/tl-mr3040">TL-MR3040</a>,
+and downloaded
+<a href="http://downloads.openwrt.org/snapshots/trunk/ar71xx/openwrt-ar71xx-generic-tl-mr3040-v2-squashfs-factory.bin">the
+recommended firmware image</a>
+(openwrt-ar71xx-generic-tl-mr3040-v2-squashfs-factory.bin) and
+uploaded it into the original web interface. The flashing went fine,
+and the machine was available via telnet on the ethernet port. After
+logging in and setting the root password, ssh was available and I
+could start to set it up as a batman-adv mesh node.</p>
+
+<p>I started off by reading the instructions from
+<a href="http://wirelessafrica.meraka.org.za/wiki/index.php?title=Antoine's_Research">Wireless
+Africa</a>, which had quite a lot of useful information, but
+eventually I followed the recipe from the Open Mesh wiki for
+<a href="http://www.open-mesh.org/projects/batman-adv/wiki/Batman-adv-openwrt-config">using
+batman-adv on OpenWrt</a>. A small snag was the fact that the
+<tt>opkg install kmod-batman-adv</tt> command did not work as it
+should. The batman-adv kernel module would fail to load because its
+dependency crc16 was not already loaded. I
+<a href="https://dev.openwrt.org/ticket/14452">reported the bug</a> to
+the openwrt project and hope it will be fixed soon. But the problem
+only seem to affect initial testing of batman-adv, as configuration
+seem to work when booting from scratch.</p>
+
+<p>The setup is done using files in /etc/config/. I did not bridge
+the Ethernet and mesh interfaces this time, to be able to hook up the
+box on my local network and log into it for configuration updates.
+The following files were changed and look like this after modifying
+them:</p>
+
+<p><tt>/etc/config/network</tt></p>
+
+<pre>
+
+config interface 'loopback'
+ option ifname 'lo'
+ option proto 'static'
+ option ipaddr '127.0.0.1'
+ option netmask '255.0.0.0'
+
+config globals 'globals'
+ option ula_prefix 'fdbf:4c12:3fed::/48'
+
+config interface 'lan'
+ option ifname 'eth0'
+ option type 'bridge'
+ option proto 'dhcp'
+ option ipaddr '192.168.1.1'
+ option netmask '255.255.255.0'
+ option hostname 'tl-mr3040'
+ option ip6assign '60'
+
+config interface 'mesh'
+ option ifname 'adhoc0'
+ option mtu '1528'
+ option proto 'batadv'
+ option mesh 'bat0'
+</pre>
+
+<p><tt>/etc/config/wireless</tt></p>
+<pre>
+
+config wifi-device 'radio0'
+ option type 'mac80211'
+ option channel '11'
+ option hwmode '11ng'
+ option path 'platform/ar933x_wmac'
+ option htmode 'HT20'
+ list ht_capab 'SHORT-GI-20'
+ list ht_capab 'SHORT-GI-40'
+ list ht_capab 'RX-STBC1'
+ list ht_capab 'DSSS_CCK-40'
+ option disabled '0'
+
+config wifi-iface 'wmesh'
+ option device 'radio0'
+ option ifname 'adhoc0'
+ option network 'mesh'
+ option encryption 'none'
+ option mode 'adhoc'
+ option bssid '02:BA:00:00:00:01'
+ option ssid 'meshfx@hackeriet'
+</pre>
+<p><tt>/etc/config/batman-adv</tt></p>
+<pre>
+
+config 'mesh' 'bat0'
+ option interfaces 'adhoc0'
+ option 'aggregated_ogms'
+ option 'ap_isolation'
+ option 'bonding'
+ option 'fragmentation'
+ option 'gw_bandwidth'
+ option 'gw_mode'
+ option 'gw_sel_class'
+ option 'log_level'
+ option 'orig_interval'
+ option 'vis_mode'
+ option 'bridge_loop_avoidance'
+ option 'distributed_arp_table'
+ option 'network_coding'
+ option 'hop_penalty'
+
+# yet another batX instance
+# config 'mesh' 'bat5'
+# option 'interfaces' 'second_mesh'
+</pre>
+
+<p>The mesh node is now operational. I have yet to test its range,
+but I hope it is good. I have not yet tested the TP-Link 3600 box
+still wrapped up in plastic.</p>
+</div>
+ <div class="tags">
+
+
+ Tags: <a href="http://people.skolelinux.org/pere/blog/tags/english">english</a>, <a href="http://people.skolelinux.org/pere/blog/tags/mesh network">mesh network</a>, <a href="http://people.skolelinux.org/pere/blog/tags/nuug">nuug</a>.
+
+
+ </div>
+ </div>
+ <div class="padding"></div>
+
+ <div class="entry">
+ <div class="title"><a href="http://people.skolelinux.org/pere/blog/Debian_init_d_boot_script_example_for_rsyslog.html">Debian init.d boot script example for rsyslog</a></div>
+ <div class="date"> 2nd November 2013</div>
+ <div class="body"><p>If one of the points of switching to a new init system in Debian is
+<a href="http://thomas.goirand.fr/blog/?p=147">to get rid of huge
+init.d scripts</a>, I doubt we need to switch away from sysvinit and
+init.d scripts at all. Here is an example init.d script, ie a rewrite
+of /etc/init.d/rsyslog:</p>
+
+<p><pre>
+#!/lib/init/init-d-script
+### BEGIN INIT INFO
+# Provides: rsyslog
+# Required-Start: $remote_fs $time
+# Required-Stop: umountnfs $time
+# X-Stop-After: sendsigs
+# Default-Start: 2 3 4 5
+# Default-Stop: 0 1 6
+# Short-Description: enhanced syslogd
+# Description: Rsyslog is an enhanced multi-threaded syslogd.
+# It is quite compatible to stock sysklogd and can be
+# used as a drop-in replacement.
+### END INIT INFO
+DESC="enhanced syslogd"
+DAEMON=/usr/sbin/rsyslogd
+</pre></p>
+
+<p>Pretty minimalistic to me... For the record, the original sysv-rc
+script was 137 lines, and the above is just 15 lines, most of it meta
+info/comments.</p>
+
+<p>How to do this, you ask? Well, one create a new script
+/lib/init/init-d-script looking something like this:
+
+<p><pre>
+#!/bin/sh
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
+# and status_of_proc is working.
+. /lib/lsb/init-functions
+
+#
+# Function that starts the daemon/service
+
+#
+do_start()
+{
+ # Return
+ # 0 if daemon has been started
+ # 1 if daemon was already running
+ # 2 if daemon could not be started
+ start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
+ || return 1
+ start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
+ $DAEMON_ARGS \
+ || return 2
+ # Add code here, if necessary, that waits for the process to be ready
+ # to handle requests from services started subsequently which depend
+ # on this one. As a last resort, sleep for some time.
+}
+
+#
+# Function that stops the daemon/service
+#
+do_stop()
+{
+ # Return
+ # 0 if daemon has been stopped
+ # 1 if daemon was already stopped
+ # 2 if daemon could not be stopped
+ # other if a failure occurred
+ start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
+ RETVAL="$?"
+ [ "$RETVAL" = 2 ] && return 2
+ # Wait for children to finish too if this is a daemon that forks
+ # and if the daemon is only ever run from this initscript.
+ # If the above conditions are not satisfied then add some other code
+ # that waits for the process to drop all resources that could be
+ # needed by services started subsequently. A last resort is to
+ # sleep for some time.
+ start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
+ [ "$?" = 2 ] && return 2
+ # Many daemons don't delete their pidfiles when they exit.
+ rm -f $PIDFILE
+ return "$RETVAL"
+}
+
+#
+# Function that sends a SIGHUP to the daemon/service
+#
+do_reload() {
+ #
+ # If the daemon can reload its configuration without
+ # restarting (for example, when it is sent a SIGHUP),
+ # then implement that here.
+ #
+ start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
+ return 0
+}
+
+SCRIPTNAME=$1
+scriptbasename="$(basename $1)"
+echo "SN: $scriptbasename"
+if [ "$scriptbasename" != "init-d-library" ] ; then
+ script="$1"
+ shift
+ . $script
+else
+ exit 0
+fi
+
+NAME=$(basename $DAEMON)
+PIDFILE=/var/run/$NAME.pid
+
+# Exit if the package is not installed
+#[ -x "$DAEMON" ] || exit 0
+
+# Read configuration variable file if it is present
+[ -r /etc/default/$NAME ] && . /etc/default/$NAME
+
+# Load the VERBOSE setting and other rcS variables
+. /lib/init/vars.sh
+
+case "$1" in
+ start)
+ [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
+ do_start
+ case "$?" in
+ 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+ 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+ esac
+ ;;
+ stop)
+ [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
+ do_stop
+ case "$?" in
+ 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+ 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+ esac
+ ;;
+ status)
+ status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
+ ;;
+ #reload|force-reload)
+ #
+ # If do_reload() is not implemented then leave this commented out
+ # and leave 'force-reload' as an alias for 'restart'.
+ #
+ #log_daemon_msg "Reloading $DESC" "$NAME"
+ #do_reload
+ #log_end_msg $?
+ #;;
+ restart|force-reload)
+ #
+ # If the "reload" option is implemented then remove the
+ # 'force-reload' alias
+ #
+ log_daemon_msg "Restarting $DESC" "$NAME"
+ do_stop
+ case "$?" in
+ 0|1)
+ do_start
+ case "$?" in
+ 0) log_end_msg 0 ;;
+ 1) log_end_msg 1 ;; # Old process is still running
+ *) log_end_msg 1 ;; # Failed to start
+ esac
+ ;;
+ *)
+ # Failed to stop
+ log_end_msg 1
+ ;;
+ esac
+ ;;
+ *)
+ echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
+ exit 3
+ ;;
+esac
+
+:
+</pre></p>
+
+<p>It is based on /etc/init.d/skeleton, and could be improved quite a
+lot. I did not really polish the approach, so it might not always
+work out of the box, but you get the idea. I did not try very hard to
+optimize it nor make it more robust either.</p>
+
+<p>A better argument for switching init system in Debian than reducing
+the size of init scripts (which is a good thing to do anyway), is to
+get boot system that is able to handle the kernel events sensibly and
+robustly, and do not depend on the boot to run sequentially. The boot
+and the kernel have not behaved sequentially in years.</p>
+</div>
+ <div class="tags">
+
+
+ Tags: <a href="http://people.skolelinux.org/pere/blog/tags/bootsystem">bootsystem</a>, <a href="http://people.skolelinux.org/pere/blog/tags/debian">debian</a>, <a href="http://people.skolelinux.org/pere/blog/tags/english">english</a>.
+
+
+ </div>
+ </div>
+ <div class="padding"></div>
+
+ <div class="entry">
+ <div class="title"><a href="http://people.skolelinux.org/pere/blog/Browser_plugin_for_SPICE__spice_xpi__uploaded_to_Debian.html">Browser plugin for SPICE (spice-xpi) uploaded to Debian</a></div>
+ <div class="date"> 1st November 2013</div>
+ <div class="body"><p><a href="http://www.spice-space.org/">The SPICE protocol</a> for
+remote display access is the preferred solution with oVirt and RedHat
+Enterprise Virtualization, and I was sad to discover the other day
+that the browser plugin needed to use these systems seamlessly was
+missing in Debian. The <a href="http://bugs.debian.org/668284">request
+for a package</a> was from 2012-04-10 with no progress since
+2013-04-01, so I decided to wrap up a package based on the great work
+from Cajus Pollmeier and put it in a collab-maint maintained git
+repository to get a package I could use. I would very much like
+others to help me maintain the package (or just take over, I do not
+mind), but as no-one had volunteered so far, I just uploaded it to
+NEW. I hope it will be available in Debian in a few days.</p>
+
+<p>The source is now available from
+<a href="http://anonscm.debian.org/gitweb/?p=collab-maint/spice-xpi.git;a=summary">http://anonscm.debian.org/gitweb/?p=collab-maint/spice-xpi.git;a=summary</a>.</p>
+</div>
+ <div class="tags">
+
+
+ Tags: <a href="http://people.skolelinux.org/pere/blog/tags/debian">debian</a>, <a href="http://people.skolelinux.org/pere/blog/tags/english">english</a>.
+
+
+ </div>
+ </div>
+ <div class="padding"></div>
+
<div class="entry">
<div class="title"><a href="http://people.skolelinux.org/pere/blog/Teaching_vmdebootstrap_to_create_Raspberry_Pi_SD_card_images.html">Teaching vmdebootstrap to create Raspberry Pi SD card images</a></div>
<div class="date">27th October 2013</div>
debootstrap in the mounted directory to create a Debian system on a
stick. Yesterday, I decided to try to teach it how to make images for
<a href="https://wiki.debian.org/RaspberryPi">Raspberry Pi</a>, as part
-of a plan to simplify the build system for the FreedomBox project.
-The FreedomBox project already uses vmdebootstrap for the virtualbox
-images, but its current build system made multistrap based system for
-Dreamplug images, and it is lacking support for Raspberry Pi.</p>
+of a plan to simplify the build system for
+<a href="https://wiki.debian.org/FreedomBox">the FreedomBox
+project</a>. The FreedomBox project already uses vmdebootstrap for
+the virtualbox images, but its current build system made multistrap
+based system for Dreamplug images, and it is lacking support for
+Raspberry Pi.</p>
<p>Armed with the knowledge on how to build "foreign" (aka non-native
architecture) chroots for Raspberry Pi, I dived into the vmdebootstrap
code and adjusted it to be able to build armel images on my amd64
Debian laptop. I ended up giving vmdebootstrap five new options,
allowing me to replicate the image creation process I use to make
-<a href=http://people.skolelinux.org/pere/blog/A_Raspberry_Pi_based_batman_adv_Mesh_network_node.html"">Debian
+<a href="http://people.skolelinux.org/pere/blog/A_Raspberry_Pi_based_batman_adv_Mesh_network_node.html">Debian
Jessie based mesh node images for the Raspberry Pi</a>. First, the
<tt>--foreign /path/to/binfm_handler</tt> option tell vmdebootstrap to
call debootstrap with --foreign and to copy the handler into the
</div>
<div class="padding"></div>
- <div class="entry">
- <div class="title"><a href="http://people.skolelinux.org/pere/blog/Finally__Debian_Edu_Wheezy_is_released_today_.html">Finally, Debian Edu Wheezy is released today!</a></div>
- <div class="date">29th September 2013</div>
- <div class="body"><p>A few hours ago, the announcement for the first stable release of
-Debian Edu Wheezy went out from the Debian publicity team. The
-complete announcement text can be found at
-<a href="http://www.debian.org/News/2013/20130928">the Debian News
-section</a>, translated to several languages. Please check it out.</p>
-
-<p>There is one minor known problem that we will fix very soon. One
-can not install a amd64 Thin Client Server using PXE, as the /var/
-partition is too small. A workaround is to extend the partition (use
-lvresize + resize2fs in tty 2 while installing).</p>
-</div>
- <div class="tags">
-
-
- Tags: <a href="http://people.skolelinux.org/pere/blog/tags/debian edu">debian edu</a>, <a href="http://people.skolelinux.org/pere/blog/tags/english">english</a>.
-
-
- </div>
- </div>
- <div class="padding"></div>
-
- <div class="entry">
- <div class="title"><a href="http://people.skolelinux.org/pere/blog/Videos_about_the_Freedombox_project___for_inspiration_and_learning.html">Videos about the Freedombox project - for inspiration and learning</a></div>
- <div class="date">27th September 2013</div>
- <div class="body"><p>The <a href="http://www.freedomboxfoundation.org/">Freedombox
-project</a> have been going on for a while, and have presented the
-vision, ideas and solution several places. Here is a little
-collection of videos of talks and presentation of the project.</p>
-
-<ul>
-
-<li><a href="http://www.youtube.com/watch?v=ukvUz5taxvA">FreedomBox -
-2,5 minute marketing film</a> (Youtube)</li>
-
-<li><a href="http://www.youtube.com/watch?v=SzW25QTVWsE">Eben Moglen
-discusses the Freedombox on CBS news 2011</a> (Youtube)</li>
-
-<li><a href="http://www.youtube.com/watch?v=Ae8SZbxfE0g">Eben Moglen -
-Freedom in the Cloud - Software Freedom, Privacy and and Security for
-Web 2.0 and Cloud computing at ISOC-NY Public Meeting 2010</a>
-(Youtube)</li>
-
-<li><a href="http://www.youtube.com/watch?v=vNaIji_3xBE">Fosdem 2011
-Keynote by Eben Moglen presenting the Freedombox</a> (Youtube)</li>
-
-<li><a href="http://www.youtube.com/watch?v=9bDDUyJSQ9s">Presentation of
-the Freedombox by James Vasile at Elevate in Gratz 2011</a> (Youtube)</li>
-
-<li><a href="http://www.youtube.com/watch?v=zQTmnk27g9s"> Freedombox -
-Discovery, Identity, and Trust by Nick Daly at Freedombox Hackfest New
-York City in 2012</a> (Youtube)</li>
-
-<li><a href="http://www.youtube.com/watch?v=tkbSB4Ba7Ck">Introduction
-to the Freedombox at Freedombox Hackfest New York City in 2012</a>
-(Youtube)</li>
-
-<li><a href="http://www.youtube.com/watch?v=z-P2Jaeg0aQ">Freedom, Out
-of the Box! by Bdale Garbee at linux.conf.au Ballarat, 2012</a> (Youtube) </li>
-
-<li><a href="https://archive.fosdem.org/2013/schedule/event/freedombox/">Freedombox
-1.0 by Eben Moglen and Bdale Garbee at Fosdem 2013</a> (FOSDEM) </li>
-
-<li><a href="http://www.youtube.com/watch?v=e1LpYX2zVYg">What is the
-FreedomBox today by Bdale Garbee at Debconf13 in Vaumarcus
-2013</a> (Youtube)</li>
-
-</ul>
-
-<p>A larger list is available from
-<a href="https://wiki.debian.org/FreedomBox/TalksAndPresentations">the
-Freedombox Wiki</a>.</p>
-
-<p>On other news, I am happy to report that Freedombox based on Debian
-Jessie is coming along quite well, and soon both Owncloud and using
-Tor should be available for testers of the Freedombox solution. :) In
-a few weeks I hope everything needed to test it is included in Debian.
-The withsqlite package is already in Debian, and the plinth package is
-pending in NEW. The third and vital part of that puzzle is the
-metapackage/setup framework, which is still pending an upload. Join
-us on <a href="irc://irc.debian.org:6667/%23freedombox">IRC
-(#freedombox on irc.debian.org)</a> and
-<a href="http://lists.alioth.debian.org/mailman/listinfo/freedombox-discuss">the
-mailing list</a> if you want to help make this vision come true.</p>
-</div>
- <div class="tags">
-
-
- Tags: <a href="http://people.skolelinux.org/pere/blog/tags/debian">debian</a>, <a href="http://people.skolelinux.org/pere/blog/tags/english">english</a>, <a href="http://people.skolelinux.org/pere/blog/tags/freedombox">freedombox</a>, <a href="http://people.skolelinux.org/pere/blog/tags/sikkerhet">sikkerhet</a>, <a href="http://people.skolelinux.org/pere/blog/tags/surveillance">surveillance</a>, <a href="http://people.skolelinux.org/pere/blog/tags/web">web</a>.
-
-
- </div>
- </div>
- <div class="padding"></div>
-
- <div class="entry">
- <div class="title"><a href="http://people.skolelinux.org/pere/blog/Third_and_probably_last_beta_release_of_Debian_Edu_Wheezy.html">Third and probably last beta release of Debian Edu Wheezy</a></div>
- <div class="date">16th September 2013</div>
- <div class="body"><p>The third wheezy based beta release of Debian Edu was wrapped up
-today. This is the release announcement from Holger Levsen:</p>
-
-<blockquote>
-<p>Hi,</p>
-
-<p>it is my pleasure to announce the third beta release (beta 2 for
-short) of <a href="http://www.skolelinux.org/">Debian Edu /
-Skolelinux</a> based on Debian Wheezy!</p>
-
-<p>Please test these images extensivly, if no new problems are found
-we plan to do this final Debian Edu Wheezy release this coming
-weekend. We are not aware of any major problems or blockers in beta2,
-if you find something, please notify us immediately!</p>
-
-<p>(More about the remaining steps for the Edu Wheezy release in
-another mail to the edu list tonight or tomorrow...)</p>
-
-<p>Noteworthy changes and software updates for Debian Edu 7.1+edu0~b2
-compared to beta1:</p>
-
-<ul>
-
-<li>The KDE proxy setup has been adjusted to use the provided wpad.dat. This
-also gets Chromium to use this proxy.</li>
-<li>Install kdepim-groupware with KDE desktops to make sure korganizer
-understand ical/dav sources.</li>
-<li>Increased default maximum size of /var/spool/squid and /skole/backup on the
-main server.</li>
-<li>A source DVD image containing all source packages is now available as well.</li>
-<li>Updates for chromium (29.0.1547.57-1~deb7u1), imagemagick
-(6.7.7.10-5+deb7u2), php5 (5.4.4-14+deb7u4), libmodplug
-(0.8.8.4-3+deb7u1+git20130828), tiff (4.0.2-6+deb7u2), linux-image
-(3.2.0-4-486_3.2.46-1+deb7u1).</li>
-
-</ul>
-
-<p>Where to get it:</p>
-
-<p>To download the multiarch netinstall CD release you can use</p>
-
-<ul>
-<li><a href="ftp://ftp.skolelinux.org/skolelinux-cd/wheezy/debian-edu-7.1+edu0~b2-CD.iso">ftp://ftp.skolelinux.org/skolelinux-cd/wheezy/debian-edu-7.1+edu0~b2-CD.iso</a></li>
-<li><a href="http://ftp.skolelinux.org/skolelinux-cd/wheezy/debian-edu-7.1+edu0~b2-CD.iso">http://ftp.skolelinux.org/skolelinux-cd/wheezy/debian-edu-7.1+edu0~b2-CD.iso</a></li>
-<li>rsync -avzP ftp.skolelinux.org::skolelinux-cd/wheezy/debian-edu-7.1+edu0~b2-CD.iso .</li>
-</ul>
-
-<p>The SHA1SUM of this image is: 3a1c89f4666df80eebcd46c5bf5fedb866f9472f</p>
-
-<p>To download the multiarch USB stick ISO release you can use
-<ul>
-<li><a href="ftp://ftp.skolelinux.org/skolelinux-cd/wheezy/debian-edu-7.1+edu0~b2-USB.iso">ftp://ftp.skolelinux.org/skolelinux-cd/wheezy/debian-edu-7.1+edu0~b2-USB.iso</a></li>
-<li><a href="http://ftp.skolelinux.org/skolelinux-cd/wheezy/debian-edu-7.1+edu0~b2-USB.iso">http://ftp.skolelinux.org/skolelinux-cd/wheezy/debian-edu-7.1+edu0~b2-USB.iso</a></li>
-<li>rsync -avzP ftp.skolelinux.org::skolelinux-cd/wheezy/debian-edu-7.1+edu0~b2-USB.iso .</li>
-</ul>
-
-<p>The SHA1SUM of this image is: 702d1718548f401c74bfa6df9f032cc3ee16597e</p>
-
-<p>The Source DVD image has the filename
-debian-edu-7.1+edu0~b2-source-DVD.iso and the SHA1SUM
-089eed8b3f962db47aae1f6a9685e9bb2fa30ca5 and is available the same way
-as the other isos.</p>
-
-<p>How to report bugs</p>
-
-<p>For information how to report bugs please see
-<br><a href="http://wiki.debian.org/DebianEdu/HowTo/ReportBugs">http://wiki.debian.org/DebianEdu/HowTo/ReportBugs</a></p>
-
-
-<p>About Debian Edu and Skolelinux</p>
-
-<p>Debian Edu, also known as Skolelinux, is a Linux distribution based
-on Debian providing an out-of-the box environment of a completely
-configured school network. Immediately after installation a school
-server running all services needed for a school network is set up just
-waiting for users and machines being added via GOsa², a comfortable
-Web-UI. A netbooting environment is prepared using PXE, so after
-initial installation of the main server from CD or USB stick all other
-machines can be installed via the network. The provided school server
-provides LDAP database and Kerberos authentication service,
-centralized home directories, DHCP server, web proxy and many other
-services. The desktop contains more than 60 educational software
-packages and more are available from the Debian archive, and schools
-can choose between KDE, Gnome, LXDE and Xfce desktop environment.</p>
-
-<p>This is the seventh test release based on Debian Wheezy. Basically
-this is an updated and slightly improved version compared to the
-Squeeze release.</p>
-
-<p>Notes for upgrades from Alpha Prereleases</p>
-
-<p>Alpha based installations should reinstall or downgrade the
-versions of gosa and libpam-mklocaluser to the ones used in this beta
-release. Both alpha and beta0 based installations should reinstall or
-deal with gosa.conf manually; there are two options: (1) Keep
-gosa.conf and edit this file as outlined on the mailing list. (2)
-Accept the new version of gosa.conf and replace both contained admin
-password placeholders with the password hashes found in the old one
-(backup copy!). In both cases all users need to change their password
-to make sure a password is set for CIFS access to their home
-directory.</p>
-
-
-<p>cheers,
-<br> Holger</p>
-</blockquote>
-</div>
- <div class="tags">
-
-
- Tags: <a href="http://people.skolelinux.org/pere/blog/tags/debian edu">debian edu</a>, <a href="http://people.skolelinux.org/pere/blog/tags/english">english</a>.
-
-
- </div>
- </div>
- <div class="padding"></div>
-
<p style="text-align: right;"><a href="index.rss"><img src="http://people.skolelinux.org/pere/blog/xml.gif" alt="RSS feed" width="36" height="14" /></a></p>
<div id="sidebar">
<li><a href="http://people.skolelinux.org/pere/blog/archive/2013/10/">October (7)</a></li>
+<li><a href="http://people.skolelinux.org/pere/blog/archive/2013/11/">November (3)</a></li>
+
</ul></li>
<li>2012
<li><a href="http://people.skolelinux.org/pere/blog/tags/bitcoin">bitcoin (7)</a></li>
- <li><a href="http://people.skolelinux.org/pere/blog/tags/bootsystem">bootsystem (12)</a></li>
+ <li><a href="http://people.skolelinux.org/pere/blog/tags/bootsystem">bootsystem (13)</a></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/bsa">bsa (2)</a></li>
- <li><a href="http://people.skolelinux.org/pere/blog/tags/debian">debian (88)</a></li>
+ <li><a href="http://people.skolelinux.org/pere/blog/tags/debian">debian (90)</a></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/debian edu">debian edu (142)</a></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/drivstoffpriser">drivstoffpriser (4)</a></li>
- <li><a href="http://people.skolelinux.org/pere/blog/tags/english">english (223)</a></li>
+ <li><a href="http://people.skolelinux.org/pere/blog/tags/english">english (226)</a></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/fiksgatami">fiksgatami (21)</a></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/ltsp">ltsp (1)</a></li>
- <li><a href="http://people.skolelinux.org/pere/blog/tags/mesh network">mesh network (3)</a></li>
+ <li><a href="http://people.skolelinux.org/pere/blog/tags/mesh network">mesh network (4)</a></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/multimedia">multimedia (25)</a></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/norsk">norsk (236)</a></li>
- <li><a href="http://people.skolelinux.org/pere/blog/tags/nuug">nuug (156)</a></li>
+ <li><a href="http://people.skolelinux.org/pere/blog/tags/nuug">nuug (157)</a></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/offentlig innsyn">offentlig innsyn (8)</a></li>
projects / homepage.git / blobdiff