+ <div class="entry">
+ <div class="title"><a href="http://people.skolelinux.org/pere/blog/Running_TP_Link_MR3040_as_a_batman_adv_mesh_node_using_openwrt.html">Running TP-Link MR3040 as a batman-adv mesh node using openwrt</a></div>
+ <div class="date">10th November 2013</div>
+ <div class="body"><p>Continuing my research into mesh networking, I was recommended to
+use TP-Link 3040 and 3600 access points as mesh nodes, and the pair I
+bought arrived on Friday. Here are my notes on how to set up the
+MR3040 as a mesh node using
+<a href="http://www.openwrt.org/">OpenWrt</a>.</p>
+
+<p>I started by following the instructions on the OpenWRT wiki for
+<a href="http://wiki.openwrt.org/toh/tp-link/tl-mr3040">TL-MR3040</a>,
+and downloaded
+<a href="http://downloads.openwrt.org/snapshots/trunk/ar71xx/openwrt-ar71xx-generic-tl-mr3040-v2-squashfs-factory.bin">the
+recommended firmware image</a>
+(openwrt-ar71xx-generic-tl-mr3040-v2-squashfs-factory.bin) and
+uploaded it into the original web interface. The flashing went fine,
+and the machine was available via telnet on the ethernet port. After
+logging in and setting the root password, ssh was available and I
+could start to set it up as a batman-adv mesh node.</p>
+
+<p>I started off by reading the instructions from
+<a href="http://wirelessafrica.meraka.org.za/wiki/index.php?title=Antoine's_Research">Wireless
+Africa</a>, which had quite a lot of useful information, but
+eventually I followed the recipe from the Open Mesh wiki for
+<a href="http://www.open-mesh.org/projects/batman-adv/wiki/Batman-adv-openwrt-config">using
+batman-adv on OpenWrt</a>. A small snag was the fact that the
+<tt>opkg install kmod-batman-adv</tt> command did not work as it
+should. The batman-adv kernel module would fail to load because its
+dependency crc16 was not already loaded. I
+<a href="https://dev.openwrt.org/ticket/14452">reported the bug</a> to
+the openwrt project and hope it will be fixed soon. But the problem
+only seem to affect initial testing of batman-adv, as configuration
+seem to work when booting from scratch.</p>
+
+<p>The setup is done using files in /etc/config/. I did not bridge
+the Ethernet and mesh interfaces this time, to be able to hook up the
+box on my local network and log into it for configuration updates.
+The following files were changed and look like this after modifying
+them:</p>
+
+<p><tt>/etc/config/network</tt></p>
+
+<pre>
+
+config interface 'loopback'
+ option ifname 'lo'
+ option proto 'static'
+ option ipaddr '127.0.0.1'
+ option netmask '255.0.0.0'
+
+config globals 'globals'
+ option ula_prefix 'fdbf:4c12:3fed::/48'
+
+config interface 'lan'
+ option ifname 'eth0'
+ option type 'bridge'
+ option proto 'dhcp'
+ option ipaddr '192.168.1.1'
+ option netmask '255.255.255.0'
+ option hostname 'tl-mr3040'
+ option ip6assign '60'
+
+config interface 'mesh'
+ option ifname 'adhoc0'
+ option mtu '1528'
+ option proto 'batadv'
+ option mesh 'bat0'
+</pre>
+
+<p><tt>/etc/config/wireless</tt></p>
+<pre>
+
+config wifi-device 'radio0'
+ option type 'mac80211'
+ option channel '11'
+ option hwmode '11ng'
+ option path 'platform/ar933x_wmac'
+ option htmode 'HT20'
+ list ht_capab 'SHORT-GI-20'
+ list ht_capab 'SHORT-GI-40'
+ list ht_capab 'RX-STBC1'
+ list ht_capab 'DSSS_CCK-40'
+ option disabled '0'
+
+config wifi-iface 'wmesh'
+ option device 'radio0'
+ option ifname 'adhoc0'
+ option network 'mesh'
+ option encryption 'none'
+ option mode 'adhoc'
+ option bssid '02:BA:00:00:00:01'
+ option ssid 'meshfx@hackeriet'
+</pre>
+<p><tt>/etc/config/batman-adv</tt></p>
+<pre>
+
+config 'mesh' 'bat0'
+ option interfaces 'adhoc0'
+ option 'aggregated_ogms'
+ option 'ap_isolation'
+ option 'bonding'
+ option 'fragmentation'
+ option 'gw_bandwidth'
+ option 'gw_mode'
+ option 'gw_sel_class'
+ option 'log_level'
+ option 'orig_interval'
+ option 'vis_mode'
+ option 'bridge_loop_avoidance'
+ option 'distributed_arp_table'
+ option 'network_coding'
+ option 'hop_penalty'
+
+# yet another batX instance
+# config 'mesh' 'bat5'
+# option 'interfaces' 'second_mesh'
+</pre>
+
+<p>The mesh node is now operational. I have yet to test its range,
+but I hope it is good. I have not yet tested the TP-Link 3600 box
+still wrapped up in plastic.</p>
+</div>
+ <div class="tags">
+
+
+ Tags: <a href="http://people.skolelinux.org/pere/blog/tags/english">english</a>, <a href="http://people.skolelinux.org/pere/blog/tags/mesh network">mesh network</a>, <a href="http://people.skolelinux.org/pere/blog/tags/nuug">nuug</a>.
+
+
+ </div>
+ </div>
+ <div class="padding"></div>
+
+ <div class="entry">
+ <div class="title"><a href="http://people.skolelinux.org/pere/blog/Debian_init_d_boot_script_example_for_rsyslog.html">Debian init.d boot script example for rsyslog</a></div>
+ <div class="date"> 2nd November 2013</div>
+ <div class="body"><p>If one of the points of switching to a new init system in Debian is
+<a href="http://thomas.goirand.fr/blog/?p=147">to get rid of huge
+init.d scripts</a>, I doubt we need to switch away from sysvinit and
+init.d scripts at all. Here is an example init.d script, ie a rewrite
+of /etc/init.d/rsyslog:</p>
+
+<p><pre>
+#!/lib/init/init-d-script
+### BEGIN INIT INFO
+# Provides: rsyslog
+# Required-Start: $remote_fs $time
+# Required-Stop: umountnfs $time
+# X-Stop-After: sendsigs
+# Default-Start: 2 3 4 5
+# Default-Stop: 0 1 6
+# Short-Description: enhanced syslogd
+# Description: Rsyslog is an enhanced multi-threaded syslogd.
+# It is quite compatible to stock sysklogd and can be
+# used as a drop-in replacement.
+### END INIT INFO
+DESC="enhanced syslogd"
+DAEMON=/usr/sbin/rsyslogd
+</pre></p>
+
+<p>Pretty minimalistic to me... For the record, the original sysv-rc
+script was 137 lines, and the above is just 15 lines, most of it meta
+info/comments.</p>
+
+<p>How to do this, you ask? Well, one create a new script
+/lib/init/init-d-script looking something like this:
+
+<p><pre>
+#!/bin/sh
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
+# and status_of_proc is working.
+. /lib/lsb/init-functions
+
+#
+# Function that starts the daemon/service
+
+#
+do_start()
+{
+ # Return
+ # 0 if daemon has been started
+ # 1 if daemon was already running
+ # 2 if daemon could not be started
+ start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
+ || return 1
+ start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
+ $DAEMON_ARGS \
+ || return 2
+ # Add code here, if necessary, that waits for the process to be ready
+ # to handle requests from services started subsequently which depend
+ # on this one. As a last resort, sleep for some time.
+}
+
+#
+# Function that stops the daemon/service
+#
+do_stop()
+{
+ # Return
+ # 0 if daemon has been stopped
+ # 1 if daemon was already stopped
+ # 2 if daemon could not be stopped
+ # other if a failure occurred
+ start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
+ RETVAL="$?"
+ [ "$RETVAL" = 2 ] && return 2
+ # Wait for children to finish too if this is a daemon that forks
+ # and if the daemon is only ever run from this initscript.
+ # If the above conditions are not satisfied then add some other code
+ # that waits for the process to drop all resources that could be
+ # needed by services started subsequently. A last resort is to
+ # sleep for some time.
+ start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
+ [ "$?" = 2 ] && return 2
+ # Many daemons don't delete their pidfiles when they exit.
+ rm -f $PIDFILE
+ return "$RETVAL"
+}
+
+#
+# Function that sends a SIGHUP to the daemon/service
+#
+do_reload() {
+ #
+ # If the daemon can reload its configuration without
+ # restarting (for example, when it is sent a SIGHUP),
+ # then implement that here.
+ #
+ start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
+ return 0
+}
+
+SCRIPTNAME=$1
+scriptbasename="$(basename $1)"
+echo "SN: $scriptbasename"
+if [ "$scriptbasename" != "init-d-library" ] ; then
+ script="$1"
+ shift
+ . $script
+else
+ exit 0
+fi
+
+NAME=$(basename $DAEMON)
+PIDFILE=/var/run/$NAME.pid
+
+# Exit if the package is not installed
+#[ -x "$DAEMON" ] || exit 0
+
+# Read configuration variable file if it is present
+[ -r /etc/default/$NAME ] && . /etc/default/$NAME
+
+# Load the VERBOSE setting and other rcS variables
+. /lib/init/vars.sh
+
+case "$1" in
+ start)
+ [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
+ do_start
+ case "$?" in
+ 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+ 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+ esac
+ ;;
+ stop)
+ [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
+ do_stop
+ case "$?" in
+ 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+ 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+ esac
+ ;;
+ status)
+ status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
+ ;;
+ #reload|force-reload)
+ #
+ # If do_reload() is not implemented then leave this commented out
+ # and leave 'force-reload' as an alias for 'restart'.
+ #
+ #log_daemon_msg "Reloading $DESC" "$NAME"
+ #do_reload
+ #log_end_msg $?
+ #;;
+ restart|force-reload)
+ #
+ # If the "reload" option is implemented then remove the
+ # 'force-reload' alias
+ #
+ log_daemon_msg "Restarting $DESC" "$NAME"
+ do_stop
+ case "$?" in
+ 0|1)
+ do_start
+ case "$?" in
+ 0) log_end_msg 0 ;;
+ 1) log_end_msg 1 ;; # Old process is still running
+ *) log_end_msg 1 ;; # Failed to start
+ esac
+ ;;
+ *)
+ # Failed to stop
+ log_end_msg 1
+ ;;
+ esac
+ ;;
+ *)
+ echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
+ exit 3
+ ;;
+esac
+
+:
+</pre></p>
+
+<p>It is based on /etc/init.d/skeleton, and could be improved quite a
+lot. I did not really polish the approach, so it might not always
+work out of the box, but you get the idea. I did not try very hard to
+optimize it nor make it more robust either.</p>
+
+<p>A better argument for switching init system in Debian than reducing
+the size of init scripts (which is a good thing to do anyway), is to
+get boot system that is able to handle the kernel events sensibly and
+robustly, and do not depend on the boot to run sequentially. The boot
+and the kernel have not behaved sequentially in years.</p>
+</div>
+ <div class="tags">
+
+
+ Tags: <a href="http://people.skolelinux.org/pere/blog/tags/bootsystem">bootsystem</a>, <a href="http://people.skolelinux.org/pere/blog/tags/debian">debian</a>, <a href="http://people.skolelinux.org/pere/blog/tags/english">english</a>.
+
+
+ </div>
+ </div>
+ <div class="padding"></div>
+
+ <div class="entry">
+ <div class="title"><a href="http://people.skolelinux.org/pere/blog/Browser_plugin_for_SPICE__spice_xpi__uploaded_to_Debian.html">Browser plugin for SPICE (spice-xpi) uploaded to Debian</a></div>
+ <div class="date"> 1st November 2013</div>
+ <div class="body"><p><a href="http://www.spice-space.org/">The SPICE protocol</a> for
+remote display access is the preferred solution with oVirt and RedHat
+Enterprise Virtualization, and I was sad to discover the other day
+that the browser plugin needed to use these systems seamlessly was
+missing in Debian. The <a href="http://bugs.debian.org/668284">request
+for a package</a> was from 2012-04-10 with no progress since
+2013-04-01, so I decided to wrap up a package based on the great work
+from Cajus Pollmeier and put it in a collab-maint maintained git
+repository to get a package I could use. I would very much like
+others to help me maintain the package (or just take over, I do not
+mind), but as no-one had volunteered so far, I just uploaded it to
+NEW. I hope it will be available in Debian in a few days.</p>
+
+<p>The source is now available from
+<a href="http://anonscm.debian.org/gitweb/?p=collab-maint/spice-xpi.git;a=summary">http://anonscm.debian.org/gitweb/?p=collab-maint/spice-xpi.git;a=summary</a>.</p>
+</div>
+ <div class="tags">
+
+
+ Tags: <a href="http://people.skolelinux.org/pere/blog/tags/debian">debian</a>, <a href="http://people.skolelinux.org/pere/blog/tags/english">english</a>.
+
+
+ </div>
+ </div>
+ <div class="padding"></div>
+
+ <div class="entry">
+ <div class="title"><a href="http://people.skolelinux.org/pere/blog/Teaching_vmdebootstrap_to_create_Raspberry_Pi_SD_card_images.html">Teaching vmdebootstrap to create Raspberry Pi SD card images</a></div>
+ <div class="date">27th October 2013</div>
+ <div class="body"><p>The
+<a href="http://packages.qa.debian.org/v/vmdebootstrap.html">vmdebootstrap</a>
+program is a a very nice system to create virtual machine images. It
+create a image file, add a partition table, mount it and run
+debootstrap in the mounted directory to create a Debian system on a
+stick. Yesterday, I decided to try to teach it how to make images for
+<a href="https://wiki.debian.org/RaspberryPi">Raspberry Pi</a>, as part
+of a plan to simplify the build system for
+<a href="https://wiki.debian.org/FreedomBox">the FreedomBox
+project</a>. The FreedomBox project already uses vmdebootstrap for
+the virtualbox images, but its current build system made multistrap
+based system for Dreamplug images, and it is lacking support for
+Raspberry Pi.</p>
+
+<p>Armed with the knowledge on how to build "foreign" (aka non-native
+architecture) chroots for Raspberry Pi, I dived into the vmdebootstrap
+code and adjusted it to be able to build armel images on my amd64
+Debian laptop. I ended up giving vmdebootstrap five new options,
+allowing me to replicate the image creation process I use to make
+<a href="http://people.skolelinux.org/pere/blog/A_Raspberry_Pi_based_batman_adv_Mesh_network_node.html">Debian
+Jessie based mesh node images for the Raspberry Pi</a>. First, the
+<tt>--foreign /path/to/binfm_handler</tt> option tell vmdebootstrap to
+call debootstrap with --foreign and to copy the handler into the
+generated chroot before running the second stage. This allow
+vmdebootstrap to create armel images on an amd64 host. Next I added
+two new options <tt>--bootsize size</tt> and <tt>--boottype
+fstype</tt> to teach it to create a separate /boot/ partition with the
+given file system type, allowing me to create an image with a vfat
+partition for the /boot/ stuff. I also added a <tt>--variant
+variant</tt> option to allow me to create smaller images without the
+Debian base system packages installed. Finally, I added an option
+<tt>--no-extlinux</tt> to tell vmdebootstrap to not install extlinux
+as a boot loader. It is not needed on the Raspberry Pi and probably
+most other non-x86 architectures. The changes were accepted by the
+upstream author of vmdebootstrap yesterday and today, and is now
+available from
+<a href="http://git.liw.fi/cgi-bin/cgit/cgit.cgi/vmdebootstrap/">the
+upstream project page</a>.</p>
+
+<p>To use it to build a Raspberry Pi image using Debian Jessie, first
+create a small script (the customize script) to add the non-free
+binary blob needed to boot the Raspberry Pi and the APT source
+list:</p>
+
+<p><pre>
+#!/bin/sh
+set -e # Exit on first error
+rootdir="$1"
+cd "$rootdir"
+cat <<EOF > etc/apt/sources.list
+deb http://http.debian.net/debian/ jessie main contrib non-free
+EOF
+# Install non-free binary blob needed to boot Raspberry Pi. This
+# install a kernel somewhere too.
+wget https://raw.github.com/Hexxeh/rpi-update/master/rpi-update \
+ -O $rootdir/usr/bin/rpi-update
+chmod a+x $rootdir/usr/bin/rpi-update
+mkdir -p $rootdir/lib/modules
+touch $rootdir/boot/start.elf
+chroot $rootdir rpi-update
+</pre></p>
+
+<p>Next, fetch the latest vmdebootstrap script and call it like this
+to build the image:</p>
+
+<pre>
+sudo ./vmdebootstrap \
+ --variant minbase \
+ --arch armel \
+ --distribution jessie \
+ --mirror http://http.debian.net/debian \
+ --image test.img \
+ --size 600M \
+ --bootsize 64M \
+ --boottype vfat \
+ --log-level debug \
+ --verbose \
+ --no-kernel \
+ --no-extlinux \
+ --root-password raspberry \
+ --hostname raspberrypi \
+ --foreign /usr/bin/qemu-arm-static \
+ --customize `pwd`/customize \
+ --package netbase \
+ --package git-core \
+ --package binutils \
+ --package ca-certificates \
+ --package wget \
+ --package kmod
+</pre></p>
+
+<p>The list of packages being installed are the ones needed by
+rpi-update to make the image bootable on the Raspberry Pi, with the
+exception of netbase, which is needed by debootstrap to find
+/etc/hosts with the minbase variant. I really wish there was a way to
+set up an Raspberry Pi using only packages in the Debian archive, but
+that is not possible as far as I know, because it boots from the GPU
+using a non-free binary blob.</p>
+
+<p>The build host need debootstrap, kpartx and qemu-user-static and
+probably a few others installed. I have not checked the complete
+build dependency list.</p>
+
+<p>The resulting image will not use the hardware floating point unit
+on the Raspberry PI, because the armel architecture in Debian is not
+optimized for that use. So the images created will be a bit slower
+than <a href="http://www.raspbian.org/">Raspbian</a> based images.</p>
+</div>
+ <div class="tags">
+
+
+ Tags: <a href="http://people.skolelinux.org/pere/blog/tags/debian">debian</a>, <a href="http://people.skolelinux.org/pere/blog/tags/english">english</a>, <a href="http://people.skolelinux.org/pere/blog/tags/freedombox">freedombox</a>, <a href="http://people.skolelinux.org/pere/blog/tags/mesh network">mesh network</a>.
+
+
+ </div>
+ </div>
+ <div class="padding"></div>
+
+ <div class="entry">
+ <div class="title"><a href="http://people.skolelinux.org/pere/blog/Det_er_jo_makta_som_er_mest_s_rbar_ved_massiv_overv_kning_av_Internett.html">Det er jo makta som er mest sårbar ved massiv overvåkning av Internett</a></div>
+ <div class="date">26th October 2013</div>
+ <div class="body"><p>De siste måneders eksponering av
+<a href="http://www.aftenposten.no/nyheter/uriks/Her-er-Edvard-Snowdens-mest-omtalte-avsloringer-7351734.html">den
+totale overvåkningen som foregår i den vestlige verden dokumenterer
+hvor sårbare vi er</a>. Men det slår meg at de som er mest sårbare
+for dette, myndighetspersoner på alle nivåer, neppe har innsett at de
+selv er de mest interessante personene å lage profiler på, for å kunne
+påvirke dem.</p>
+
+<p>For å ta et lite eksempel: Stortingets nettsted,
+<a href="http://www.stortinget.no/">www.stortinget.no</a> (og
+forsåvidt også
+<a href="http://data.stortinget.no/">data.stortinget.no</a>),
+inneholder informasjon om det som foregår på Stortinget, og jeg antar
+de største brukerne av informasjonen der er representanter og
+rådgivere på Stortinget. Intet overraskende med det. Det som derimot
+er mer skjult er at Stortingets nettsted bruker
+<a href="http://en.wikipedia.org/wiki/Google_Analytics">Google
+Analytics</a>, hvilket gjør at enhver som besøker nettsidene der også
+rapporterer om besøket via Internett-linjer som passerer Sverige,
+England og videre til USA. Det betyr at informasjon om ethvert besøk
+på stortingets nettsider kan snappes opp av svensk, britisk og USAs
+etterretningsvesen. De kan dermed holde et øye med hvilke
+Stortingssaker stortingsrepresentantene synes er interessante å sjekke
+ut, og hvilke sider rådgivere og andre på stortinget synes er
+interessant å besøke, når de gjør det og hvilke andre representanter
+som sjekker de samme sidene omtrent samtidig. Stortingets bruk av
+Google Analytics gjør det dermed enkelt for utenlands etteretning å
+spore representantenes aktivitet og interesse. Hvis noen av
+representantene bruker Google Mail eller noen andre tjenestene som
+krever innlogging, så vil det være enda enklere å finne ut nøyaktig
+hvilke personer som bruker hvilke nettlesere og dermed knytte
+informasjonen opp til enkeltpersoner på Stortinget.</p>
+
+<p>Og jo flere nettsteder som bruker Google Analytics, jo bedre
+oversikt over stortingsrepresentantenes lesevaner og interesse blir
+tilgjengelig for svensk, britisk og USAs etterretning. Hva de kan
+bruke den informasjonen til overlater jeg til leseren å undres
+over.</p>
+</div>
+ <div class="tags">
+
+
+ Tags: <a href="http://people.skolelinux.org/pere/blog/tags/norsk">norsk</a>, <a href="http://people.skolelinux.org/pere/blog/tags/personvern">personvern</a>, <a href="http://people.skolelinux.org/pere/blog/tags/sikkerhet">sikkerhet</a>, <a href="http://people.skolelinux.org/pere/blog/tags/stortinget">stortinget</a>, <a href="http://people.skolelinux.org/pere/blog/tags/surveillance">surveillance</a>.
+
+
+ </div>
+ </div>
+ <div class="padding"></div>
+
+ <div class="entry">
+ <div class="title"><a href="http://people.skolelinux.org/pere/blog/A_Raspberry_Pi_based_batman_adv_Mesh_network_node.html">A Raspberry Pi based batman-adv Mesh network node</a></div>
+ <div class="date">21st October 2013</div>
+ <div class="body"><p>The last few days I have been experimenting with
+<a href="http://www.open-mesh.org/projects/batman-adv/wiki">the
+batman-adv mesh technology</a>. I want to gain some experience to see
+if it will fit <a href="https://wiki.debian.org/FreedomBox">the
+Freedombox project</a>, and together with my neighbors try to build a
+mesh network around the park where I live. Batman-adv is a layer 2
+mesh system ("ethernet" in other words), where the mesh network appear
+as if all the mesh clients are connected to the same switch.</p>
+
+<p>My hardware of choice was the Linksys WRT54GL routers I had lying
+around, but I've been unable to get them working with batman-adv. So
+instead, I started playing with a
+<a href="http://www.raspberrypi.org/">Raspberry Pi</a>, and tried to
+get it working as a mesh node. My idea is to use it to create a mesh
+node which function as a switch port, where everything connected to
+the Raspberry Pi ethernet plug is connected (bridged) to the mesh
+network. This allow me to hook a wifi base station like the Linksys
+WRT54GL to the mesh by plugging it into a Raspberry Pi, and allow
+non-mesh clients to hook up to the mesh. This in turn is useful for
+Android phones using <a href="http://servalproject.org/">the Serval
+Project</a> voip client, allowing every one around the playground to
+phone and message each other for free. The reason is that Android
+phones do not see ad-hoc wifi networks (they are filtered away from
+the GUI view), and can not join the mesh without being rooted. But if
+they are connected using a normal wifi base station, they can talk to
+every client on the local network.</p>
+
+<p>To get this working, I've created a debian package
+<a href="https://github.com/petterreinholdtsen/meshfx-node">meshfx-node</a>
+and a script
+<a href="https://github.com/petterreinholdtsen/meshfx-node/blob/master/build-rpi-mesh-node">build-rpi-mesh-node</a>
+to create the Raspberry Pi boot image. I'm using Debian Jessie (and
+not Raspbian), to get more control over the packages available.
+Unfortunately a huge binary blob need to be inserted into the boot
+image to get it booting, but I'll ignore that for now. Also, as
+Debian lack support for the CPU features available in the Raspberry
+Pi, the system do not use the hardware floating point unit. I hope
+the routing performance isn't affected by the lack of hardware FPU
+support.</p>
+
+<p>To create an image, run the following with a sudo enabled user
+after inserting the target SD card into the build machine:</p>
+
+<p><pre>
+% wget -O build-rpi-mesh-node \
+ https://raw.github.com/petterreinholdtsen/meshfx-node/master/build-rpi-mesh-node
+% sudo bash -x ./build-rpi-mesh-node > build.log 2>&1
+% dd if=/root/rpi/rpi_basic_jessie_$(date +%Y%m%d).img of=/dev/mmcblk0 bs=1M
+%
+</pre></p>
+
+<p>Booting with the resulting SD card on a Raspberry PI with a USB
+wifi card inserted should give you a mesh node. At least it does for
+me with a the wifi card I am using. The default mesh settings are the
+ones used by the Oslo mesh project at Hackeriet, as I mentioned in
+<a href="http://people.skolelinux.org/pere/blog/Oslo_community_mesh_network___with_NUUG_and_Hackeriet_at_Hausmania.html">an
+earlier blog post about this mesh testing</a>.</p>
+
+<p>The mesh node was not horribly expensive either. I bought
+everything over the counter in shops nearby. If I had ordered online
+from the lowest bidder, the price should be significantly lower:</p>
+
+<p><table>
+
+<tr><th>Supplier</th><th>Model</th><th>NOK</th></tr>
+<tr><td>Teknikkmagasinet</td><td>Raspberry Pi model B</td><td>349.90</td></tr>
+<tr><td>Teknikkmagasinet</td><td>Raspberry Pi type B case</td><td>99.90</td></tr>
+<tr><td>Lefdal</td><td>Jensen Air:Link 25150</td><td>295.-</td></tr>
+<tr><td>Clas Ohlson</td><td>Kingston 16 GB SD card</td><td>199.-</td></tr>
+<tr><td>Total cost</td><td></td><td>943.80</td></tr>
+
+</table></p>
+
+<p>Now my mesh network at home consist of one laptop in the basement
+connected to my production network, one Raspberry Pi node on the 1th
+floor that can be seen by my neighbor across the park, and one
+play-node I use to develop the image building script. And some times
+I hook up my work horse laptop to the mesh to test it. I look forward
+to figuring out what kind of latency the batman-adv setup will give,
+and how much packet loss we will experience around the park. :)</p>
+</div>
+ <div class="tags">
+
+
+ Tags: <a href="http://people.skolelinux.org/pere/blog/tags/english">english</a>, <a href="http://people.skolelinux.org/pere/blog/tags/freedombox">freedombox</a>, <a href="http://people.skolelinux.org/pere/blog/tags/mesh network">mesh network</a>, <a href="http://people.skolelinux.org/pere/blog/tags/nuug">nuug</a>.
+
+
+ </div>
+ </div>
+ <div class="padding"></div>
+
+ <div class="entry">
+ <div class="title"><a href="http://people.skolelinux.org/pere/blog/Perl_library_to_control_the_Spykee_robot_moved_to_github.html">Perl library to control the Spykee robot moved to github</a></div>
+ <div class="date">19th October 2013</div>
+ <div class="body"><p>Back in 2010, I created a Perl library to talk to
+<a href="http://en.wikipedia.org/wiki/Spykee">the Spykee robot</a>
+(with two belts, wifi, USB and Linux) and made it available from my
+web page. Today I concluded that it should move to a site that is
+easier to use to cooperate with others, and moved it to github. If
+you got a Spykee robot, you might want to check out
+<a href="https://github.com/petterreinholdtsen/libspykee-perl">the
+libspykee-perl github repository</a>.</p>
+</div>
+ <div class="tags">
+
+
+ Tags: <a href="http://people.skolelinux.org/pere/blog/tags/english">english</a>, <a href="http://people.skolelinux.org/pere/blog/tags/nuug">nuug</a>, <a href="http://people.skolelinux.org/pere/blog/tags/robot">robot</a>.
+
+
+ </div>
+ </div>
+ <div class="padding"></div>
+
+ <div class="entry">
+ <div class="title"><a href="http://people.skolelinux.org/pere/blog/Good_causes__Debian_Outreach_Program_for_Women__EFF_documenting_the_spying_and_Open_access_in_Norway.html">Good causes: Debian Outreach Program for Women, EFF documenting the spying and Open access in Norway</a></div>
+ <div class="date">15th October 2013</div>
+ <div class="body"><p>The last few days I came across a few good causes that should get
+wider attention. I recommend signing and donating to each one of
+these. :)</p>
+
+<p>Via <a href="http://www.debian.org/News/weekly/2013/18/">Debian
+Project News for 2013-10-14</a> I came across the Outreach Program for
+Women program which is a Google Summer of Code like initiative to get
+more women involved in free software. One debian sponsor has offered
+to match <a href="http://debian.ch/opw2013">any donation done to Debian
+earmarked</a> for this initiative. I donated a few minutes ago, and
+hope you will to. :)</p>
+
+<p>And the Electronic Frontier Foundation just announced plans to
+create <a href="https://supporters.eff.org/donate/nsa-videos">video
+documentaries about the excessive spying</a> on every Internet user that
+take place these days, and their need to fund the work. I've already
+donated. Are you next?</p>
+
+<p>For my Norwegian audience, the organisation Studentenes og
+Akademikernes Internasjonale Hjelpefond is collecting signatures for a
+statement under the heading
+<a href="http://saih.no/Bloggers_United/">Bloggers United for Open
+Access</a> for those of us asking for more focus on open access in the
+Norwegian government. So far 499 signatures. I hope you will sign it
+too.</p>
+</div>
+ <div class="tags">
+
+
+ Tags: <a href="http://people.skolelinux.org/pere/blog/tags/debian">debian</a>, <a href="http://people.skolelinux.org/pere/blog/tags/english">english</a>, <a href="http://people.skolelinux.org/pere/blog/tags/opphavsrett">opphavsrett</a>, <a href="http://people.skolelinux.org/pere/blog/tags/surveillance">surveillance</a>.
+
+
+ </div>
+ </div>
+ <div class="padding"></div>
+
<div class="entry">
<div class="title"><a href="http://people.skolelinux.org/pere/blog/Oslo_community_mesh_network___with_NUUG_and_Hackeriet_at_Hausmania.html">Oslo community mesh network - with NUUG and Hackeriet at Hausmania</a></div>
<div class="date">11th October 2013</div>
from the Freifunk community to Oslo to talk about mesh networks. I
came across this video where Hans Jørgen Lysglimt interview the
speakers about this talk (from
-<a href="https://www.youtube.com/watch?v=N2Kd7CLkhSY">youtube</a>:</p>
-
+<a href="https://www.youtube.com/watch?v=N2Kd7CLkhSY">youtube</a>):</p>
<p><iframe width="420" height="315" src="https://www.youtube.com/embed/N2Kd7CLkhSY" frameborder="0" allowfullscreen></iframe></p>
figure out which one would be "best" for some definitions of best, but
given that the community mesh group in Oslo is so small, I believe it
is best to hook up with the existing one instead of trying to create a
-completely different setup, and thus this have decided to focus on
+completely different setup, and thus I have decided to focus on
batman-adv for now. It sure help me to know that the very cool
<a href="http://www.servalproject.org/">Serval project in Australia</a>
is using batman-adv as their meshing technology when it create a self
organizing and self healing telephony system for disaster areas and
less industrialized communities. Check out this cool video presenting
that project (from
-<a href="https://www.youtube.com/watch?v=30qNfzJCQOA">youtube</a>:</p>
+<a href="https://www.youtube.com/watch?v=30qNfzJCQOA">youtube</a>):</p>
<p><iframe width="560" height="315" src="https://www.youtube.com/embed/30qNfzJCQOA" frameborder="0" allowfullscreen></iframe></p>
B.A.T.M.A.N. advanced are protocols used by several free software
based community mesh networks.</p>
-</p>The batman-adv protocol is a bit special, as it provide layer 2
+<p>The batman-adv protocol is a bit special, as it provide layer 2
(as in ethernet ) routing, allowing ipv4 and ipv6 to work on the same
network. One way to think about it is that it provide a mesh based
vlan you can bridge to or handle like any other vlan connected to your
introduction</a> is available from the Open Mesh project. These are
the key settings needed to join the Oslo meshfx network:</p>
-<table>
+<p><table>
<tr><th>Setting</th><th>Value</th></tr>
<tr><td>Protocol / kernel module</td><td>batman-adv</td></tr>
<tr><td>ESSID</td><td>meshfx@hackeriet</td></tr>
<td>Channel / Frequency</td><td>11 / 2462</td></tr>
<td>Cell ID</td><td>02:BA:00:00:00:01</td>
-</table>
+</table></p>
<p>The reason for setting ad-hoc wifi Cell ID is to work around bugs
in firmware used in wifi card and wifi drivers. (See a nice post from
to figure out a good business plan for mesh networking and as far as I
know have closed down the experiment. Perhaps Telenor or others would
be interested in a cooperation?</p>
+
+<p><strong>Update 2013-10-12</strong>: I was just
+<a href="http://lists.alioth.debian.org/pipermail/freedombox-discuss/2013-October/005900.html">told
+by the Serval project developers</a> that they no longer use
+batman-adv (but are compatible with it), but their own crypto based
+mesh system.</p>
</div>
<div class="tags">
- Tags: <a href="http://people.skolelinux.org/pere/blog/tags/english">english</a>, <a href="http://people.skolelinux.org/pere/blog/tags/nuug">nuug</a>.
+ Tags: <a href="http://people.skolelinux.org/pere/blog/tags/english">english</a>, <a href="http://people.skolelinux.org/pere/blog/tags/freedombox">freedombox</a>, <a href="http://people.skolelinux.org/pere/blog/tags/mesh network">mesh network</a>, <a href="http://people.skolelinux.org/pere/blog/tags/nuug">nuug</a>.
</div>
</div>
<div class="padding"></div>
- <div class="entry">
- <div class="title"><a href="http://people.skolelinux.org/pere/blog/Finally__Debian_Edu_Wheezy_is_released_today_.html">Finally, Debian Edu Wheezy is released today!</a></div>
- <div class="date">29th September 2013</div>
- <div class="body"><p>A few hours ago, the announcement for the first stable release of
-Debian Edu Wheezy went out from the Debian publicity team. The
-complete announcement text can be found at
-<a href="http://www.debian.org/News/2013/20130928">the Debian News
-section</a>, translated to several languages. Please check it out.</p>
-
-<p>There is one minor known problem that we will fix very soon. One
-can not install a amd64 Thin Client Server using PXE, as the /var/
-partition is too small. A workaround is to extend the partition (use
-lvresize + resize2fs in tty 2 while installing).</p>
-</div>
- <div class="tags">
-
-
- Tags: <a href="http://people.skolelinux.org/pere/blog/tags/debian edu">debian edu</a>, <a href="http://people.skolelinux.org/pere/blog/tags/english">english</a>.
-
-
- </div>
- </div>
- <div class="padding"></div>
-
- <div class="entry">
- <div class="title"><a href="http://people.skolelinux.org/pere/blog/Videos_about_the_Freedombox_project___for_inspiration_and_learning.html">Videos about the Freedombox project - for inspiration and learning</a></div>
- <div class="date">27th September 2013</div>
- <div class="body"><p>The <a href="http://www.freedomboxfoundation.org/">Freedombox
-project</a> have been going on for a while, and have presented the
-vision, ideas and solution several places. Here is a little
-collection of videos of talks and presentation of the project.</p>
-
-<ul>
-
-<li><a href="http://www.youtube.com/watch?v=ukvUz5taxvA">FreedomBox -
-2,5 minute marketing film</a> (Youtube)</li>
-
-<li><a href="http://www.youtube.com/watch?v=SzW25QTVWsE">Eben Moglen
-discusses the Freedombox on CBS news 2011</a> (Youtube)</li>
-
-<li><a href="http://www.youtube.com/watch?v=Ae8SZbxfE0g">Eben Moglen -
-Freedom in the Cloud - Software Freedom, Privacy and and Security for
-Web 2.0 and Cloud computing at ISOC-NY Public Meeting 2010</a>
-(Youtube)</li>
-
-<li><a href="http://www.youtube.com/watch?v=vNaIji_3xBE">Fosdem 2011
-Keynote by Eben Moglen presenting the Freedombox</a> (Youtube)</li>
-
-<li><a href="http://www.youtube.com/watch?v=9bDDUyJSQ9s">Presentation of
-the Freedombox by James Vasile at Elevate in Gratz 2011</a> (Youtube)</li>
-
-<li><a href="http://www.youtube.com/watch?v=zQTmnk27g9s"> Freedombox -
-Discovery, Identity, and Trust by Nick Daly at Freedombox Hackfest New
-York City in 2012</a> (Youtube)</li>
-
-<li><a href="http://www.youtube.com/watch?v=tkbSB4Ba7Ck">Introduction
-to the Freedombox at Freedombox Hackfest New York City in 2012</a>
-(Youtube)</li>
-
-<li><a href="http://www.youtube.com/watch?v=z-P2Jaeg0aQ">Freedom, Out
-of the Box! by Bdale Garbee at linux.conf.au Ballarat, 2012</a> (Youtube) </li>
-
-<li><a href="https://archive.fosdem.org/2013/schedule/event/freedombox/">Freedombox
-1.0 by Eben Moglen and Bdale Garbee at Fosdem 2013</a> (FOSDEM) </li>
-
-<li><a href="http://www.youtube.com/watch?v=e1LpYX2zVYg">What is the
-FreedomBox today by Bdale Garbee at Debconf13 in Vaumarcus
-2013</a> (Youtube)</li>
-
-</ul>
-
-<p>A larger list is available from
-<a href="https://wiki.debian.org/FreedomBox/TalksAndPresentations">the
-Freedombox Wiki</a>.</p>
-
-<p>On other news, I am happy to report that Freedombox based on Debian
-Jessie is coming along quite well, and soon both Owncloud and using
-Tor should be available for testers of the Freedombox solution. :) In
-a few weeks I hope everything needed to test it is included in Debian.
-The withsqlite package is already in Debian, and the plinth package is
-pending in NEW. The third and vital part of that puzzle is the
-metapackage/setup framework, which is still pending an upload. Join
-us on <a href="irc://irc.debian.org:6667/%23freedombox">IRC
-(#freedombox on irc.debian.org)</a> and
-<a href="http://lists.alioth.debian.org/mailman/listinfo/freedombox-discuss">the
-mailing list</a> if you want to help make this vision come true.</p>
-</div>
- <div class="tags">
-
-
- Tags: <a href="http://people.skolelinux.org/pere/blog/tags/debian">debian</a>, <a href="http://people.skolelinux.org/pere/blog/tags/english">english</a>, <a href="http://people.skolelinux.org/pere/blog/tags/freedombox">freedombox</a>, <a href="http://people.skolelinux.org/pere/blog/tags/sikkerhet">sikkerhet</a>, <a href="http://people.skolelinux.org/pere/blog/tags/surveillance">surveillance</a>, <a href="http://people.skolelinux.org/pere/blog/tags/web">web</a>.
-
-
- </div>
- </div>
- <div class="padding"></div>
-
- <div class="entry">
- <div class="title"><a href="http://people.skolelinux.org/pere/blog/Third_and_probably_last_beta_release_of_Debian_Edu_Wheezy.html">Third and probably last beta release of Debian Edu Wheezy</a></div>
- <div class="date">16th September 2013</div>
- <div class="body"><p>The third wheezy based beta release of Debian Edu was wrapped up
-today. This is the release announcement from Holger Levsen:</p>
-
-<blockquote>
-<p>Hi,</p>
-
-<p>it is my pleasure to announce the third beta release (beta 2 for
-short) of <a href="http://www.skolelinux.org/">Debian Edu /
-Skolelinux</a> based on Debian Wheezy!</p>
-
-<p>Please test these images extensivly, if no new problems are found
-we plan to do this final Debian Edu Wheezy release this coming
-weekend. We are not aware of any major problems or blockers in beta2,
-if you find something, please notify us immediately!</p>
-
-<p>(More about the remaining steps for the Edu Wheezy release in
-another mail to the edu list tonight or tomorrow...)</p>
-
-<p>Noteworthy changes and software updates for Debian Edu 7.1+edu0~b2
-compared to beta1:</p>
-
-<ul>
-
-<li>The KDE proxy setup has been adjusted to use the provided wpad.dat. This
-also gets Chromium to use this proxy.</li>
-<li>Install kdepim-groupware with KDE desktops to make sure korganizer
-understand ical/dav sources.</li>
-<li>Increased default maximum size of /var/spool/squid and /skole/backup on the
-main server.</li>
-<li>A source DVD image containing all source packages is now available as well.</li>
-<li>Updates for chromium (29.0.1547.57-1~deb7u1), imagemagick
-(6.7.7.10-5+deb7u2), php5 (5.4.4-14+deb7u4), libmodplug
-(0.8.8.4-3+deb7u1+git20130828), tiff (4.0.2-6+deb7u2), linux-image
-(3.2.0-4-486_3.2.46-1+deb7u1).</li>
-
-</ul>
-
-<p>Where to get it:</p>
-
-<p>To download the multiarch netinstall CD release you can use</p>
-
-<ul>
-<li><a href="ftp://ftp.skolelinux.org/skolelinux-cd/wheezy/debian-edu-7.1+edu0~b2-CD.iso">ftp://ftp.skolelinux.org/skolelinux-cd/wheezy/debian-edu-7.1+edu0~b2-CD.iso</a></li>
-<li><a href="http://ftp.skolelinux.org/skolelinux-cd/wheezy/debian-edu-7.1+edu0~b2-CD.iso">http://ftp.skolelinux.org/skolelinux-cd/wheezy/debian-edu-7.1+edu0~b2-CD.iso</a></li>
-<li>rsync -avzP ftp.skolelinux.org::skolelinux-cd/wheezy/debian-edu-7.1+edu0~b2-CD.iso .</li>
-</ul>
-
-<p>The SHA1SUM of this image is: 3a1c89f4666df80eebcd46c5bf5fedb866f9472f</p>
-
-<p>To download the multiarch USB stick ISO release you can use
-<ul>
-<li><a href="ftp://ftp.skolelinux.org/skolelinux-cd/wheezy/debian-edu-7.1+edu0~b2-USB.iso">ftp://ftp.skolelinux.org/skolelinux-cd/wheezy/debian-edu-7.1+edu0~b2-USB.iso</a></li>
-<li><a href="http://ftp.skolelinux.org/skolelinux-cd/wheezy/debian-edu-7.1+edu0~b2-USB.iso">http://ftp.skolelinux.org/skolelinux-cd/wheezy/debian-edu-7.1+edu0~b2-USB.iso</a></li>
-<li>rsync -avzP ftp.skolelinux.org::skolelinux-cd/wheezy/debian-edu-7.1+edu0~b2-USB.iso .</li>
-</ul>
-
-<p>The SHA1SUM of this image is: 702d1718548f401c74bfa6df9f032cc3ee16597e</p>
-
-<p>The Source DVD image has the filename
-debian-edu-7.1+edu0~b2-source-DVD.iso and the SHA1SUM
-089eed8b3f962db47aae1f6a9685e9bb2fa30ca5 and is available the same way
-as the other isos.</p>
-
-<p>How to report bugs</p>
-
-<p>For information how to report bugs please see
-<br><a href="http://wiki.debian.org/DebianEdu/HowTo/ReportBugs">http://wiki.debian.org/DebianEdu/HowTo/ReportBugs</a></p>
-
-
-<p>About Debian Edu and Skolelinux</p>
-
-<p>Debian Edu, also known as Skolelinux, is a Linux distribution based
-on Debian providing an out-of-the box environment of a completely
-configured school network. Immediately after installation a school
-server running all services needed for a school network is set up just
-waiting for users and machines being added via GOsa², a comfortable
-Web-UI. A netbooting environment is prepared using PXE, so after
-initial installation of the main server from CD or USB stick all other
-machines can be installed via the network. The provided school server
-provides LDAP database and Kerberos authentication service,
-centralized home directories, DHCP server, web proxy and many other
-services. The desktop contains more than 60 educational software
-packages and more are available from the Debian archive, and schools
-can choose between KDE, Gnome, LXDE and Xfce desktop environment.</p>
-
-<p>This is the seventh test release based on Debian Wheezy. Basically
-this is an updated and slightly improved version compared to the
-Squeeze release.</p>
-
-<p>Notes for upgrades from Alpha Prereleases</p>
-
-<p>Alpha based installations should reinstall or downgrade the
-versions of gosa and libpam-mklocaluser to the ones used in this beta
-release. Both alpha and beta0 based installations should reinstall or
-deal with gosa.conf manually; there are two options: (1) Keep
-gosa.conf and edit this file as outlined on the mailing list. (2)
-Accept the new version of gosa.conf and replace both contained admin
-password placeholders with the password hashes found in the old one
-(backup copy!). In both cases all users need to change their password
-to make sure a password is set for CIFS access to their home
-directory.</p>
-
-
-<p>cheers,
-<br> Holger</p>
-</blockquote>
-</div>
- <div class="tags">
-
-
- Tags: <a href="http://people.skolelinux.org/pere/blog/tags/debian edu">debian edu</a>, <a href="http://people.skolelinux.org/pere/blog/tags/english">english</a>.
-
-
- </div>
- </div>
- <div class="padding"></div>
-
- <div class="entry">
- <div class="title"><a href="http://people.skolelinux.org/pere/blog/Recipe_to_test_the_Freedombox_project_on_amd64_or_Raspberry_Pi.html">Recipe to test the Freedombox project on amd64 or Raspberry Pi</a></div>
- <div class="date">10th September 2013</div>
- <div class="body"><p>I was introduced to the
-<a href="http://www.freedomboxfoundation.org/">Freedombox project</a>
-in 2010, when Eben Moglen presented his vision about serving the need
-of non-technical people to keep their personal information private and
-within the legal protection of their own homes. The idea is to give
-people back the power over their network and machines, and return
-Internet back to its intended peer-to-peer architecture. Instead of
-depending on a central service, the Freedombox will give everyone
-control over their own basic infrastructure.</p>
-
-<p>I've intended to join the effort since then, but other tasks have
-taken priority. But this summers nasty news about the misuse of trust
-and privilege exercised by the "western" intelligence gathering
-communities increased my eagerness to contribute to a point where I
-actually started working on the project a while back.</p>
-
-<p>The <a href="https://alioth.debian.org/projects/freedombox/">initial
-Debian initiative</a> based on the vision from Eben Moglen, is to
-create a simple and cheap Debian based appliance that anyone can hook
-up in their home and get access to secure and private services and
-communication. The initial deployment platform have been the
-<a href="http://www.globalscaletechnologies.com/t-dreamplugdetails.aspx">Dreamplug</a>,
-which is a piece of hardware I do not own. So to be able to test what
-the current Freedombox setup look like, I had to come up with a way to install
-it on some hardware I do have access to. I have rewritten the
-<a href="https://github.com/NickDaly/freedom-maker">freedom-maker</a>
-image build framework to use .deb packages instead of only copying
-setup into the boot images, and thanks to this rewrite I am able to
-set up any machine supported by Debian Wheezy as a Freedombox, using
-the previously mentioned deb (and a few support debs for packages
-missing in Debian).</p>
-
-<p>The current Freedombox setup consist of a set of bootstrapping
-scripts
-(<a href="https://github.com/petterreinholdtsen/freedombox-setup">freedombox-setup</a>),
-and a administrative web interface
-(<a href="https://github.com/NickDaly/Plinth">plinth</a> + exmachina +
-withsqlite), as well as a privacy enhancing proxy based on
-<a href="http://packages.qa.debian.org/privoxy">privoxy</a>
-(freedombox-privoxy). There is also a web/javascript based XMPP
-client (<a href="http://packages.qa.debian.org/jwchat">jwchat</a>)
-trying (unsuccessfully so far) to talk to the XMPP server
-(<a href="http://packages.qa.debian.org/ejabberd">ejabberd</a>). The
-web interface is pluggable, and the goal is to use it to enable OpenID
-services, mesh network connectivity, use of TOR, etc, etc. Not much of
-this is really working yet, see
-<a href="https://github.com/NickDaly/freedombox-todos/blob/master/TODO">the
-project TODO</a> for links to GIT repositories. Most of the code is
-on github at the moment. The HTTP proxy is operational out of the
-box, and the admin web interface can be used to add/remove plinth
-users. I've not been able to do anything else with it so far, but
-know there are several branches spread around github and other places
-with lots of half baked features.</p>
-
-<p>Anyway, if you want to have a look at the current state, the
-following recipes should work to give you a test machine to poke
-at.</p>
-
-<p><strong>Debian Wheezy amd64</strong></p>
-
-<ol>
-
-<li>Fetch normal Debian Wheezy installation ISO.</li>
-<li>Boot from it, either as CD or USB stick.</li>
-<li><p>Press [tab] on the boot prompt and add this as a boot argument
-to the Debian installer:<p>
-<pre>url=<a href="http://www.reinholdtsen.name/freedombox/preseed-wheezy.dat">http://www.reinholdtsen.name/freedombox/preseed-wheezy.dat</a></pre></li>
-
-<li>Answer the few language/region/password questions and pick disk to
-install on.</li>
-
-<li>When the installation is finished and the machine have rebooted a
-few times, your Freedombox is ready for testing.</li>
-
-</ol>
-
-<p><strong>Raspberry Pi Raspbian</strong></p>
-
-<ol>
-
-<li>Fetch a Raspbian SD card image, create SD card.</li>
-<li>Boot from SD card, extend file system to fill the card completely.</li>
-<li><p>Log in and add this to /etc/sources.list:</p>
-<pre>
-deb <a href="http://www.reinholdtsen.name/freedombox/">http://www.reinholdtsen.name/freedombox</a> wheezy main
-</pre></li>
-<li><p>Run this as root:</p>
-<pre>
-wget -O - http://www.reinholdtsen.name/freedombox/BE1A583D.asc | \
- apt-key add -
-apt-get update
-apt-get install freedombox-setup
-/usr/lib/freedombox/setup
-</pre></li>
-<li>Reboot into your freshly created Freedombox.</li>
-
-</ol>
-
-<p>You can test it on other architectures too, but because the
-freedombox-privoxy package is binary, it will only work as intended on
-the architectures where I have had time to build the binary and put it
-in my APT repository. But do not let this stop you. It is only a
-short "<tt>apt-get source -b freedombox-privoxy</tt>" away. :)</p>
-
-<p>Note that by default Freedombox is a DHCP server on the
-192.168.1.0/24 subnet, so if this is your subnet be careful and turn
-off the DHCP server by running "<tt>update-rc.d isc-dhcp-server
-disable</tt>" as root.</p>
-
-<p>Please let me know if this works for you, or if you have any
-problems. We gather on the IRC channel
-<a href="irc://irc.debian.org:6667/%23freedombox">#freedombox</a> on
-irc.debian.org and the
-<a href="http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/freedombox-discuss">project
-mailing list</a>.</p>
-
-<p>Once you get your freedombox operational, you can visit
-<tt>http://your-host-name:8001/</tt> to see the state of the plint
-welcome screen (dead end - do not be surprised if you are unable to
-get past it), and next visit <tt>http://your-host-name:8001/help/</tt>
-to look at the rest of plinth. The default user is 'admin' and the
-default password is 'secret'.</p>
-</div>
- <div class="tags">
-
-
- Tags: <a href="http://people.skolelinux.org/pere/blog/tags/debian">debian</a>, <a href="http://people.skolelinux.org/pere/blog/tags/english">english</a>, <a href="http://people.skolelinux.org/pere/blog/tags/freedombox">freedombox</a>, <a href="http://people.skolelinux.org/pere/blog/tags/sikkerhet">sikkerhet</a>, <a href="http://people.skolelinux.org/pere/blog/tags/surveillance">surveillance</a>, <a href="http://people.skolelinux.org/pere/blog/tags/web">web</a>.
-
-
- </div>
- </div>
- <div class="padding"></div>
-
- <div class="entry">
- <div class="title"><a href="http://people.skolelinux.org/pere/blog/Datalagringsdirektivet_gj_r_at_Oslo_H_yre_og_Arbeiderparti_ikke_f_r_min_stemme_i__r.html">Datalagringsdirektivet gjør at Oslo Høyre og Arbeiderparti ikke får min stemme i år</a></div>
- <div class="date"> 8th September 2013</div>
- <div class="body"><p>I 2011 raderte et stortingsflertall bestående av Høyre og
-Arbeiderpartiet vekk en betydelig del av privatsfæren til det norske
-folk. Det ble vedtatt at det skulle registreres og lagres i et halvt
-år hvor alle som bærer på en mobiltelefon befinner seg, hvem de
-snakker med og hvor lenge de snakket sammen. Det skal også
-registreres hvem de sendte SMS-meldinger til, hvem en har sendt epost
-til, og hvilke nett-tjenere en besøkte. Saken er kjent som
-<a href="http://beta.holderdeord.no/issues/innfore-datalagringsdirektivet">Datalagringsdirektivet
-(DLD)</a>, og innebærer at alle innbyggerne og andre innenfor Norges
-grenser overvåkes døgnet rundt. Det ble i praksis innført brev og
-besøkskontroll av hele befolkningen. Rapporter fra de landene som
-allerede har innført slik total lagring av borgernes
-kommunikasjonsmønstre forteller at det ikke hjelper i
-kriminalitetsbekjempelsen. Den norske prislappen blir mange hundre
-millioner, uten at det ser ut til å bidra positivt til politiets
-arbeide. Jeg synes flere hundre millioner i stedet burde vært brukt
-på noe som kan dokumenteres å ha effekt i kriminalitetsbekjempelsen.
-Se mer på
-<a href="http://no.wikipedia.org/wiki/Datalagringsdirektivet">Wikipedia</a>
-og <a href="http://www.uhuru.biz/?cat=84">Jon Wessel-Aas</a>.</p>
-
-<p>Hva er problemet, tenkter du kanskje? Et åpenbart problem er at
-medienes kildevern i praksis blir radert ut. Den innsamlede
-informasjonen gjør det mulig å finne ut hvem som har snakket med
-journalister på telefon, SMS og epost, og hvem som har vært i nærheten
-av journalister så sant begge bar med seg en telefon. Et annet er at
-advokatvernet blir sterkt redusert, der politiet kan finne ut hvem
-som har snakket med en advokat når, eller vært i møter en med advokat.
-Et tredje er at svært personlig informasjon kan avledes fra hvilke
-nettsteder en har besøkt. Har en besøkt hivnorge.no,
-swingersnorge.com eller andre sider som kan brukes til avlede
-interesser som hører til privatsfæren, vil denne informasjonen være
-tilgjengelig takket være datalagringsdirektivet.</p>
-
-<p>De fleste partiene var mot, kun to partier stemte for. Høyre og
-Arbeiderpartiet. Og både Høyre og Arbeiderpartiet i Oslo har
-DLD-forkjempere på toppen av sine lister (har ikke sjekket de andre
-fylkene). Det er dermed helt uaktuelt for meg å stemme på disse
-partiene. Her er oversikten over partienes valglister i Oslo, med
-informasjon om hvem som stemte hva i første DLD-votering i Stortinget,
-basert på informasjon fra mine venner i
-<a href="http://beta.holderdeord.no/votes/1301946411e">Holder de
-Ord</a> samt <a href="http://data.stortinget.no/">data.stortinget.no</a>.
-Først ut er stortingslista fra Høyre for Oslo:</p>
-
-<style type="text/css">
-.for {background-color:#F5A9A9;}
-.mot {background-color:#A9F5BC;}
-.ukjent { }
-</style>
-
-<table>
-<tr><th>#</th><th>Navn, fødselsår og valgkrets</th><th>Stemme/kommentar</th></tr>
-
-<tr class="for"><td>1.</td>
-<td>Ine Marie Eriksen Søreide (1976), Gamle Oslo</td>
-<td>Stemte for DLD</td></tr>
-
-<tr class="mot"><td>2.</td>
-<td>Nikolai Astrup (1978), Frogner</td>
-<td>Stemte mot DLD</td></tr>
-
-<tr class="mot"><td>3.</td>
-<td>Michael Tetzschner (1954), Vestre Aker</td>
-<td>Stemte mot DLD</td>
-
-<tr class="ukjent"><td>4.</td>
-<td>Kristin Vinje (1963), Nordre Aker</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td>5.</td>
-<td>Mudassar Hussain Kapur (1976), Nordstrand</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td>6.</td>
-<td>Stefan Magnus B. Heggelund (1984), Grünerløkka</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td>7.</td>
-<td>Heidi Nordby Lunde (1973), Grünerløkka</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td>8.</td>
-<td>Frode Helgerud (1950), Frogner</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td>9.</td>
-<td>Afshan Rafiq (1975), Stovner</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td>10.</td>
-<td>Astrid Nøklebye Heiberg (1936), Frogner</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td>11.</td>
-<td>Camilla Strandskog (1984) St.Hanshaugen</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td>12.</td>
-<td>John Christian Elden (1967), Ullern</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td>13.</td>
-<td>Berit Solli (1972), Alna</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td>14.</td>
-<td>Ola Kvisgaard (1963), Frogner</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td>15.</td>
-<td>James Stove Lorentzen (1957), Vestre Aker</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td>16.</td>
-<td>Gülsüm Koc (1987), Stovner</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td>17.</td>
-<td>Jon Ole Whist (1976), Grünerløkka</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td>18.</td>
-<td>Maren Eline Malthe-Sørenssen (1971), Vestre Aker</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td>19.</td>
-<td>Ståle Hagen (1968), Søndre Nordstrand</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td>20.</td>
-<td>Kjell Omdal Erichsen (1978), Sagene</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td>21.</td>
-<td>Saida R. Begum (1987), Grünerløkka</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td>22.</td>
-<td>Torkel Brekke (1970), Nordre Aker</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td>23.</td>
-<td>Sverre K. Seeberg (1950), Vestre Aker</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td>24.</td>
-<td>Julie Margrethe Brodtkorb (1974), Ullern</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td>25.</td>
-<td>Fabian Stang (1955), Frogner</td>
-<td>Ikke til stede</td></tr>
-
-</table>
-
-<p>Deretter har vi stortingslista fra Arbeiderpartiet for Oslo:</p>
-
-<table>
-
-<tr><th>#</th><th>Navn, fødselsår og valgkrets</th><th>Stemme/kommentar</th></tr>
-
-<tr class="for"><td>1.</td>
-<td>Jens Stoltenberg (1959), Frogner</td>
-<td>Ikke til stede i Stortinget, leder av regjeringen som fremmet forslaget</td></tr>
-
-<tr class="for"><td>2.</td>
-<td>Hadia Tajik (1983), Grünerløkka</td>
-<td>Stemte for DLD</td></tr>
-
-<tr class="for"><td> 3.</td>
-<td>Jonas Gahr Støre (1960), Vestre Aker</td>
-<td>Ikke til stede i Stortinget, medlem av regjeringen som fremmet forslaget</td></tr>
-
-<tr class="for"><td> 4.</td>
-<td>Marianne Marthinsen (1980), Grünerløkka</td>
-<td>Stemte for DLD</td></tr>
-
-<tr class="for"><td> 5.</td>
-<td>Jan Bøhler (1952), Alna</td>
-<td>Stemte for DLD</td></tr>
-
-<tr class="for"><td> 6.</td>
-<td>Marit Nybakk (1947), Frogner</td>
-<td>Stemte for DLD</td></tr>
-
-<tr class="for"><td> 7.</td>
-<td>Truls Wickholm (1978), Sagene</td>
-<td>Stemte for DLD</td></tr>
-
-<tr class="ukjent"><td> 8.</td>
-<td>Prableen Kaur (1993), Grorud</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td> 9.</td>
-<td>Vegard Grøslie Wennesland (1983), St.Hanshaugen</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td> 10.</td>
-<td>Inger Helene Vaaten (1975), Grorud</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td> 11.</td>
-<td>Ivar Leveraas (1939), Alna</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td> 12.</td>
-<td>Grete Haugdal (1971), Gamle Oslo</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td> 13.</td>
-<td>Olav Tønsberg (1948), Alna</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td> 14.</td>
-<td>Khamshajiny Gunaratnam (1988), Grorud</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td> 15.</td>
-<td>Fredrik Mellem (1969), Sagene</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td> 16.</td>
-<td>Brit Axelsen (1945), Stovner</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td> 17.</td>
-<td>Dag Bayegan-Harlem (1977), Ullern</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td> 18.</td>
-<td>Kristin Sandaker (1963), Østeinsjø</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td> 19.</td>
-<td>Bashe Musse (1965), Grünerløkka</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td> 20.</td>
-<td>Torunn Kanutte Husvik (1983), St. Hanshaugen</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td> 21.</td>
-<td>Steinar Andersen (1947), Nordstrand</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td> 22.</td>
-<td>Anne Cathrine Berger (1972), Sagene</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td> 23.</td>
-<td>Khalid Mahmood (1959), Østensjø</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td> 24.</td>
-<td>Munir Jaber (1990), Alna</td>
-<td>Ikke til stede</td></tr>
-
-<tr class="ukjent"><td> 25.</td>
-<td>Libe Solberg Rieber-Mohn (1965), Frogner</td>
-<td>Ikke til stede</td></tr>
-
-</table>
-
-<p>Hvilket parti får så min stemme i år. Jeg tror det blir
-<a href="http://piratpartiet.no/">Piratpartiet</a>. Hvis de kan bidra
-til at det kommer noen inn på Stortinget med teknisk peiling, så får
-kanskje ikke overvåkningsgalskapen like fritt spillerom som det har
-hatt så langt.</p>
-
-</div>
- <div class="tags">
-
-
- Tags: <a href="http://people.skolelinux.org/pere/blog/tags/norsk">norsk</a>, <a href="http://people.skolelinux.org/pere/blog/tags/personvern">personvern</a>, <a href="http://people.skolelinux.org/pere/blog/tags/stortinget">stortinget</a>, <a href="http://people.skolelinux.org/pere/blog/tags/surveillance">surveillance</a>, <a href="http://people.skolelinux.org/pere/blog/tags/valg">valg</a>.
-
-
- </div>
- </div>
- <div class="padding"></div>
-
- <div class="entry">
- <div class="title"><a href="http://people.skolelinux.org/pere/blog/Second_beta_release__beta_1__of_Debian_Edu_Skolelinux_based_on_Debian_Wheezy.html">Second beta release (beta 1) of Debian Edu/Skolelinux based on Debian Wheezy</a></div>
- <div class="date">22nd August 2013</div>
- <div class="body"><p>The second wheezy based beta release of Debian Edu was wrapped up
-today, slightly delayed because of some bugs in the initial Windows
-integration fixes . This is the release announcement:</p>
-
-<p><strong>New features for Debian Edu 7.1+edu0~b1 released 2013-08-22</strong></p>
-
-<p>These are the release notes for Debian Edu / Skolelinux
-7.1+edu0~b1, based on Debian with codename "Wheezy".</p>
-
-<p><strong>About Debian Edu and Skolelinux</strong></p>
-
-<p><a href="http://www.skolelinux.org/">Debian Edu, also known as
-Skolelinux</a>, is a Linux distribution based on Debian providing an
-out-of-the box environment of a completely configured school
-network. Immediately after installation a school server running all
-services needed for a school network is set up just waiting for users
-and machines being added via GOsa², a comfortable Web-UI. A netbooting
-environment is prepared using PXE, so after initial installation of
-the main server from CD or USB stick all other machines can be
-installed via the network. The provided school server provides LDAP
-database and Kerberos authentication service, centralized home
-directories, DHCP server, web proxy and many other services. The
-desktop contains
-<a href="http://people.skolelinux.org/pere/blog/Educational_applications_included_in_Debian_Edu___Skolelinux__the_screenshot_collection____.html">more
-than 60 educational software packages</a> and more are available from
-the Debian archive, and schools can choose between KDE, Gnome, LXDE
-and Xfce desktop environment.</p>
-
-<p>This is the sixth test release based on Debian Wheezy. Basically this
-is an updated and slightly improved version compared to the Squeeze
-release.</p>
-
-<p>ALERT: Alpha based installations should reinstall or downgrade the
-versions of gosa and libpam-mklocaluser to the ones used in this beta
-release. Both alpha and beta0 based installations should reinstall or
-deal with gosa.conf manually; there are two options: (1) Keep
-gosa.conf and edit this file as outlined
-<a href="http://lists.debian.org/debian-edu/2013/08/msg00127.html">on
-the mailing list</a>. (2) Accept the new version of gosa.conf and
-replace both contained admin password placeholders with the password
-hashes found in the old one (backup copy!). In both cases every user
-need to change their their password to make sure a password is set for
-CIFS access to their home directory.</p>
-
-<p><strong>Software updates</strong></p>
-
-<ul>
-
-<li>Added ssh askpass packages to default installation, to ensure ssh
- work also without a attached tty.</li>
-<li>Add the command-not-found package to the default installation to
- make it easier to figure out where to find missing command line
- tools. Please note, that the command 'update-command-not-found'
- has to be run as root to actually make it useful (internet access
- required).</li>
-
-</ul>
-
-<p><strong>Other changes</strong></p>
-
-<ul>
-
-<li>Adjusted the USB stick ISO image build to include every tool
-needed for desktop=xfce installations.</li>
-<li>Adjust thin-client-server task to work when installing from USB
-stick ISO image.</li>
-<li>Made new grub artwork (changed png from indexed to RGB format).</li>
-<li>Minor cleanup in the CUPS setup.</li>
-<li>Make sure that bootstrapping of the Samba domain really happens
- during installation of the main server and adjust SID handling to
- cope with this.</li>
-<li>Make Samba passwords changeable (again) via GOsa².</li>
-<li>Fix generation of LM and NT password hashes via GOsa² to avoid
- empty password hashes.</li>
-<li>Adapted Samba machine domain joining to latest change in the
- smbldap-tools Perl package, fixing bugs blocking Windows machines
- from joining the Samba domain.</li>
-
-</ul>
-
-<p><strong>Known issues</strong></p>
-
-<ul>
-
-<li>KDE fails to understand the wpad.dat file provided, causing it to
- not use the http proxy as it should.</li>
-<li>Chromium also fails to use the proxy when using the KDE desktop
- (using the KDE configuration).</li>
-
-</ul>
-
-<p><strong>Where to get it</strong></p>
-
-<p>To download the multiarch netinstall CD release you can use</p>
-
-<ul>
-
-<li><a href="ftp://ftp.skolelinux.org/skolelinux-cd/wheezy/debian-edu-7.1+edu0~b1-CD.iso">ftp://ftp.skolelinux.org/skolelinux-cd/wheezy/debian-edu-7.1+edu0~b1-CD.iso</a></li>
-
-<li><a href="http://ftp.skolelinux.org/skolelinux-cd/wheezy/debian-edu-7.1+edu0~b1-CD.iso">http://ftp.skolelinux.org/skolelinux-cd/wheezy/debian-edu-7.1+edu0~b1-CD.iso</a></li>
-
-<li>rsync -avzP ftp.skolelinux.org::skolelinux-cd/wheezy/debian-edu-7.1+edu0~b1-CD.iso .</li>
-
-</ul>
-
-<p>The MD5SUM of this image is: 1e357f80b55e703523f2254adde6d78b
-<br>The SHA1SUM of this image is: 7157f9be5fd27c7694d713c6ecfed61c3edda3b2</p>
-
-<p>To download the multiarch USB stick ISO release you can use</p>
-
-<ul>
-
-<li><a href="ftp://ftp.skolelinux.org/skolelinux-cd/wheezy/debian-edu-7.1+edu0~b1-USB.iso">ftp://ftp.skolelinux.org/skolelinux-cd/wheezy/debian-edu-7.1+edu0~b1-USB.iso</a></li>
-<li><a href="http://ftp.skolelinux.org/skolelinux-cd/wheezy/debian-edu-7.1+edu0~b1-USB.iso">http://ftp.skolelinux.org/skolelinux-cd/wheezy/debian-edu-7.1+edu0~b1-USB.iso</a></li>
-<li>rsync -avzP ftp.skolelinux.org::skolelinux-cd/wheezy/debian-edu-7.1+edu0~b1-USB.iso .</li>
-
-</ul>
-
-<p>The MD5SUM of this image is: 7a8408ead59cf7e3cef25afb6e91590b
-<br>The SHA1SUM of this image is: f1817c031f02790d5edb3bfa0dcf8451088ad119</p>
-
-
-<p><strong>How to report bugs</strong></p>
-
-<p><a href="http://wiki.debian.org/DebianEdu/HowTo/ReportBugs">http://wiki.debian.org/DebianEdu/HowTo/ReportBugs</a>
-</div>
- <div class="tags">
-
-
- Tags: <a href="http://people.skolelinux.org/pere/blog/tags/debian edu">debian edu</a>, <a href="http://people.skolelinux.org/pere/blog/tags/english">english</a>.
-
-
- </div>
- </div>
- <div class="padding"></div>
-
- <div class="entry">
- <div class="title"><a href="http://people.skolelinux.org/pere/blog/Intel_180_SSD_disk_with_Lenovo_firmware_can_not_use_Intel_firmware.html">Intel 180 SSD disk with Lenovo firmware can not use Intel firmware</a></div>
- <div class="date">18th August 2013</div>
- <div class="body"><p>Earlier, I reported about
-<a href="http://people.skolelinux.org/pere/blog/How_to_fix_a_Thinkpad_X230_with_a_broken_180_GB_SSD_disk.html">my
-problems using an Intel SSD 520 Series 180 GB disk</a>. Friday I was
-told by IBM that the original disk should be thrown away. And as
-there no longer was a problem if I bricked the firmware, I decided
-today to try to install Intel firmware to replace the Lenovo firmware
-currently on the disk.</p>
-
-<p>I searched the Intel site for firmware, and found
-<a href="https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3472&DwnldID=18363&ProductFamily=Solid-State+Drives+and+Caching&ProductLine=Intel%c2%ae+High+Performance+Solid-State+Drive&ProductProduct=Intel%c2%ae+SSD+520+Series+(180GB%2c+2.5in+SATA+6Gb%2fs%2c+25nm%2c+MLC)&lang=eng">issdfut_2.0.4.iso</a>
-(aka Intel SATA Solid-State Drive Firmware Update Tool) which
-according to the site should contain the latest firmware for SSD
-disks. I inserted the broken disk in one of my spare laptops and
-booted the ISO from a USB stick. The disk was recognized, but the
-program claimed the newest firmware already were installed and refused
-to insert any Intel firmware. So no change, and the disk is still
-unable to handle write load. :( I guess the only way to get them
-working would be if Lenovo releases new firmware. No idea how likely
-that is. Anyway, just blogging about this test for completeness. I
-got a working Samsung disk, and see no point in spending more time on
-the broken disks.</p>
-</div>
- <div class="tags">
-
-
- Tags: <a href="http://people.skolelinux.org/pere/blog/tags/debian">debian</a>, <a href="http://people.skolelinux.org/pere/blog/tags/english">english</a>.
-
-
- </div>
- </div>
- <div class="padding"></div>
-
- <div class="entry">
- <div class="title"><a href="http://people.skolelinux.org/pere/blog/90_percent_done_with_the_Norwegian_draft_translation_of_Free_Culture.html">90 percent done with the Norwegian draft translation of Free Culture</a></div>
- <div class="date"> 2nd August 2013</div>
- <div class="body"><p>It has been a while since my last update. Since last summer, I
-have worked on a Norwegian
-<a href="http://www.docbook.org/">docbook</a> version of the 2004 book
-<a href="http://free-culture.cc/">Free Culture</a> by Lawrence Lessig,
-to get a Norwegian text explaining the problems with the copyright
-law. Yesterday, I finally broken the 90% mark, when counting the
-number of strings to translate. Due to real life constraints, I have
-not had time to work on it since March, but when the summer broke out,
-I found time to work on it again. Still lots of work left, but the
-first draft is nearing completion. I created a graph to show the
-progress of the translation:</p>
-
-<p><img width="80%" align="center" src="https://github.com/petterreinholdtsen/free-culture-lessig/raw/master/progress.png"></p>
-
-<p>When the first draft is done, the translated text need to be
-proof read, and the remaining formatting problems with images and SVG
-drawings need to be fixed. There are probably also some index entries
-missing that need to be added. This can be done by comparing the
-index entries listed in the SiSU version of the book, or comparing the
-English docbook version with the paper version. Last, the colophon
-page with ISBN numbers etc need to be wrapped up before the release is
-done. I should also figure out how to get correct Norwegian sorting
-of the index pages. All docbook tools I have tried so far (xmlto,
-docbook-xsl, dblatex) get the order of symbols and the special
-Norwegian letters ÆØÅ wrong.</p>
-
-<p>There is still need for translators and people with docbook
-knowledge, to be able to get a good looking book (I still struggle
-with dblatex, xmlto and docbook-xsl) as well as to do the draft
-translation and proof reading. And I would like the figures to be
-redrawn as SVGs to make it easy to translate them. Any SVG master
-around? There are also some legal terms that are unfamiliar to me.
-If you want to help, please get in touch with me, and check out the
-project files currently available from
-<a href="https://github.com/petterreinholdtsen/free-culture-lessig">github</a>.</p>
-
-<p>If you are curious what the translated book currently look like,
-the updated
-<a href="https://github.com/petterreinholdtsen/free-culture-lessig/blob/master/archive/freeculture.nb.pdf?raw=true">PDF</a>
-and
-<a href="https://github.com/petterreinholdtsen/free-culture-lessig/blob/master/archive/freeculture.nb.epub?raw=true">EPUB</a>
-are published on github. The HTML version is published as well, but
-github hand it out with MIME type text/plain, confusing browsers, so I
-saw no point in linking to that version.</p>
-</div>
- <div class="tags">
-
-
- Tags: <a href="http://people.skolelinux.org/pere/blog/tags/docbook">docbook</a>, <a href="http://people.skolelinux.org/pere/blog/tags/english">english</a>, <a href="http://people.skolelinux.org/pere/blog/tags/freeculture">freeculture</a>.
-
-
- </div>
- </div>
- <div class="padding"></div>
-
<p style="text-align: right;"><a href="index.rss"><img src="http://people.skolelinux.org/pere/blog/xml.gif" alt="RSS feed" width="36" height="14" /></a></p>
<div id="sidebar">
<li><a href="http://people.skolelinux.org/pere/blog/archive/2013/09/">September (5)</a></li>
-<li><a href="http://people.skolelinux.org/pere/blog/archive/2013/10/">October (2)</a></li>
+<li><a href="http://people.skolelinux.org/pere/blog/archive/2013/10/">October (7)</a></li>
+
+<li><a href="http://people.skolelinux.org/pere/blog/archive/2013/11/">November (3)</a></li>
</ul></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/bitcoin">bitcoin (7)</a></li>
- <li><a href="http://people.skolelinux.org/pere/blog/tags/bootsystem">bootsystem (12)</a></li>
+ <li><a href="http://people.skolelinux.org/pere/blog/tags/bootsystem">bootsystem (13)</a></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/bsa">bsa (2)</a></li>
- <li><a href="http://people.skolelinux.org/pere/blog/tags/debian">debian (86)</a></li>
+ <li><a href="http://people.skolelinux.org/pere/blog/tags/debian">debian (90)</a></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/debian edu">debian edu (142)</a></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/drivstoffpriser">drivstoffpriser (4)</a></li>
- <li><a href="http://people.skolelinux.org/pere/blog/tags/english">english (219)</a></li>
+ <li><a href="http://people.skolelinux.org/pere/blog/tags/english">english (226)</a></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/fiksgatami">fiksgatami (21)</a></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/freeculture">freeculture (12)</a></li>
- <li><a href="http://people.skolelinux.org/pere/blog/tags/freedombox">freedombox (2)</a></li>
+ <li><a href="http://people.skolelinux.org/pere/blog/tags/freedombox">freedombox (5)</a></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/frikanalen">frikanalen (11)</a></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/ltsp">ltsp (1)</a></li>
+ <li><a href="http://people.skolelinux.org/pere/blog/tags/mesh network">mesh network (4)</a></li>
+
<li><a href="http://people.skolelinux.org/pere/blog/tags/multimedia">multimedia (25)</a></li>
- <li><a href="http://people.skolelinux.org/pere/blog/tags/norsk">norsk (235)</a></li>
+ <li><a href="http://people.skolelinux.org/pere/blog/tags/norsk">norsk (236)</a></li>
- <li><a href="http://people.skolelinux.org/pere/blog/tags/nuug">nuug (154)</a></li>
+ <li><a href="http://people.skolelinux.org/pere/blog/tags/nuug">nuug (157)</a></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/offentlig innsyn">offentlig innsyn (8)</a></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/open311">open311 (2)</a></li>
- <li><a href="http://people.skolelinux.org/pere/blog/tags/opphavsrett">opphavsrett (44)</a></li>
+ <li><a href="http://people.skolelinux.org/pere/blog/tags/opphavsrett">opphavsrett (45)</a></li>
- <li><a href="http://people.skolelinux.org/pere/blog/tags/personvern">personvern (66)</a></li>
+ <li><a href="http://people.skolelinux.org/pere/blog/tags/personvern">personvern (67)</a></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/raid">raid (1)</a></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/rfid">rfid (2)</a></li>
- <li><a href="http://people.skolelinux.org/pere/blog/tags/robot">robot (7)</a></li>
+ <li><a href="http://people.skolelinux.org/pere/blog/tags/robot">robot (8)</a></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/rss">rss (1)</a></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/scraperwiki">scraperwiki (2)</a></li>
- <li><a href="http://people.skolelinux.org/pere/blog/tags/sikkerhet">sikkerhet (31)</a></li>
+ <li><a href="http://people.skolelinux.org/pere/blog/tags/sikkerhet">sikkerhet (32)</a></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/sitesummary">sitesummary (4)</a></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/stavekontroll">stavekontroll (3)</a></li>
- <li><a href="http://people.skolelinux.org/pere/blog/tags/stortinget">stortinget (8)</a></li>
+ <li><a href="http://people.skolelinux.org/pere/blog/tags/stortinget">stortinget (9)</a></li>
- <li><a href="http://people.skolelinux.org/pere/blog/tags/surveillance">surveillance (18)</a></li>
+ <li><a href="http://people.skolelinux.org/pere/blog/tags/surveillance">surveillance (20)</a></li>
<li><a href="http://people.skolelinux.org/pere/blog/tags/sysadmin">sysadmin (1)</a></li>
projects / homepage.git / blobdiff