-<p>The key number to look at is the third number in the per-op list.
-It is the number of NFS timeouts experiences per file system
-operation. Here 22 write timeouts and 5 access timeouts. If these
-numbers are increasing, I believe the machine is experiencing NFS
-hang. Unfortunately the timeout value do not start to increase right
-away. The NFS operations need to time out first, and this can take a
-while. The exact timeout value depend on the setup. For example the
-defaults for TCP and UDP mount points are quite different, and the
-timeout value is affected by the soft, hard, timeo and retrans NFS
-mount options.</p>
-
-<p>The only way I have been able to get working on Debian and RedHat
-Enterprise Linux for getting the timeout count is to peek in /proc/.
-But according to
-<ahref="http://docs.oracle.com/cd/E19253-01/816-4555/netmonitor-12/index.html">Solaris
-10 System Administration Guide: Network Services</a>, the 'nfsstat -c'
-command can be used to get these timeout values. But this do not work
-on Linux, as far as I can tell. I
-<ahref="http://bugs.debian.org/857043">asked Debian about this</a>,
-but have not seen any replies yet.</p>
-
-<p>Is there a better way to figure out if a Linux NFS client is
-experiencing NFS hangs? Is there a way to detect which processes are
-affected? Is there a way to get the NFS mount going quickly once the
-network problem causing the NFS hang has been cleared? I would very
-much welcome some clues, as we regularly run into NFS hangs.</p>
+<p>The script will extract the list of packages to upgrade, try to
+download the packages needed to upgrade one package, install the
+downloaded packages using dpkg. The idea is to upgrade packages
+without changing the APT mark for the package (ie the one recording of
+the package was manually requested or pulled in as a dependency). To
+use it, simply run it as root from the command line. If it fail, try
+'apt install -f' to clean up the mess and run the script again. This
+might happen if the new packages conflict with one of the old
+packages. dpkg is unable to remove, while apt can do this.</p>
+
+<p>It take one option, a package to ignore in the list of packages to
+upgrade. The option to ignore a package is there to be able to skip
+the packages that are simply too large to unpack. Today this was
+'ghc', but I have run into other large packages causing similar
+problems earlier (like TeX).</p>
+
+<p>Update 2018-07-08: Thanks to Paul Wise, I am aware of two
+alternative ways to handle this. The "unattended-upgrades
+--minimal-upgrade-steps" option will try to calculate upgrade sets for
+each package to upgrade, and then upgrade them in order, smallest set
+first. It might be a better option than my above mentioned script.
+Also, "aptutude upgrade" can upgrade single packages, thus avoiding
+the need for using "dpkg -i" in the script above.</p>
+
+<p>As usual, if you use Bitcoin and want to show your support of my
+activities, please send Bitcoin donations to my address
+<b><a href="bitcoin:15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b">15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b</a></b>.</p>
+</description>
+ </item>
+
+ <item>
+ <title>The worlds only stone power plant?</title>
+ <link>http://people.skolelinux.org/pere/blog/The_worlds_only_stone_power_plant_.html</link>
+ <guid isPermaLink="true">http://people.skolelinux.org/pere/blog/The_worlds_only_stone_power_plant_.html</guid>
+ <pubDate>Sat, 30 Jun 2018 10:35:00 +0200</pubDate>
+ <description><p>So far, at least hydro-electric power, coal power, wind power,
+solar power, and wood power are well known. Until a few days ago, I
+had never heard of stone power. Then I learn about a quarry in a
+mountain in
+<a href="https://en.wikipedia.org/wiki/Bremanger">Bremanger</a> i
+Norway, where
+<a href="https://www.bontrup.com/en/activities/raw-materials/bremanger-quarry/">the
+Bremanger Quarry</a> company is extracting stone and dumping the stone
+into a shaft leading to its shipping harbour. This downward movement
+in this shaft is used to produce electricity. In short, it is using
+falling rocks instead of falling water to produce electricity, and
+according to its own statements it is producing more power than it is
+using, and selling the surplus electricity to the Norwegian power
+grid. I find the concept truly amazing. Is this the worlds only
+stone power plant?</p>
+
+<p>As usual, if you use Bitcoin and want to show your support of my
+activities, please send Bitcoin donations to my address
+<b><a href="bitcoin:15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b">15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b</a></b>.</p>
+</description>
+ </item>
+
+ <item>
+ <title>Add-on to control the projector from within Kodi</title>
+ <link>http://people.skolelinux.org/pere/blog/Add_on_to_control_the_projector_from_within_Kodi.html</link>
+ <guid isPermaLink="true">http://people.skolelinux.org/pere/blog/Add_on_to_control_the_projector_from_within_Kodi.html</guid>
+ <pubDate>Tue, 26 Jun 2018 23:55:00 +0200</pubDate>
+ <description><p>My movie playing setup involve <a href="https://kodi.tv/">Kodi</a>,
+<a href="https://openelec.tv">OpenELEC</a> (probably soon to be
+replaced with <a href="https://libreelec.tv/">LibreELEC</a>) and an
+Infocus IN76 video projector. My projector can be controlled via both
+a infrared remote controller, and a RS-232 serial line. The vendor of
+my projector, <a href="https://www.infocus.com/">InFocus</a>, had been
+sensible enough to document the serial protocol in its user manual, so
+it is easily available, and I used it some years ago to write
+<a href="https://github.com/petterreinholdtsen/infocus-projector-control">a
+small script to control the projector</a>. For a while now, I longed
+for a setup where the projector was controlled by Kodi, for example in
+such a way that when the screen saver went on, the projector was
+turned off, and when the screen saver exited, the projector was turned
+on again.</p>
+
+<p>A few days ago, with very good help from parts of my family, I
+managed to find a Kodi Add-on for controlling a Epson projector, and
+got in touch with its author to see if we could join forces and make a
+Add-on with support for several projectors. To my pleasure, he was
+positive to the idea, and we set out to add InFocus support to his
+add-on, and make the add-on suitable for the official Kodi add-on
+repository.</p>
+
+<p>The Add-on is now working (for me, at least), with a few minor
+adjustments. The most important change I do relative to the master
+branch in the github repository is embedding the
+<a href="https://github.com/pyserial/pyserial">pyserial module</a> in
+the add-on. The long term solution is to make a "script" type
+pyserial module for Kodi, that can be pulled in as a dependency in
+Kodi. But until that in place, I embed it.</p>
+
+<p>The add-on can be configured to turn on the projector when Kodi
+starts, off when Kodi stops as well as turn the projector off when the
+screensaver start and on when the screesaver stops. It can also be
+told to set the projector source when turning on the projector.
+
+<p>If this sound interesting to you, check out
+<a href="https://github.com/fredrik-eriksson/kodi_projcontrol">the
+project github repository</a>. Perhaps you can send patches to
+support your projector too? As soon as we find time to wrap up the
+latest changes, it should be available for easy installation using any
+Kodi instance.</p>
+
+<p>For future improvements, I would like to add projector model
+detection and the ability to adjust the brightness level of the
+projector from within Kodi. We also need to figure out how to handle
+the cooling period of the projector. My projector refuses to turn on
+for 60 seconds after it was turned off. This is not handled well by
+the add-on at the moment.</p>
+
+<p>As usual, if you use Bitcoin and want to show your support of my
+activities, please send Bitcoin donations to my address
+<b><a href="bitcoin:15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b">15oWEoG9dUPovwmUL9KWAnYRtNJEkP1u1b</a></b>.</p>
projects / homepage.git / blobdiff